CAT 3517 30HP 14GPM 3000PSI 800RPM TRIPLEX HIGH PRESSURE CAR WASH PLUNGER PUMP, US $2,999.99 – Picture 0

CAT 3517 30HP 14GPM 3000PSI 800RPM TRIPLEX HIGH PRESSURE CAR WASH PLUNGER PUMP, US $2,999.99 – Picture 1

CAT 3517 30HP 14GPM 3000PSI 800RPM TRIPLEX HIGH PRESSURE CAR WASH PLUNGER PUMP, US $2,999.99 – Picture 2

CAT 3517 30HP 14GPM 3000PSI 800RPM TRIPLEX HIGH PRESSURE CAR WASH PLUNGER PUMP, US $2,999.99 – Picture 3

CAT 3517 30HP 14GPM 3000PSI 800RPM TRIPLEX HIGH PRESSURE CAR WASH PLUNGER PUMP, US $2,999.99 – Picture 4

CAT 3517 30HP 14GPM 3000PSI 800RPM TRIPLEX HIGH PRESSURE CAR WASH PLUNGER PUMP, US $2,999.99 – Picture 5

CAT 3517 30HP 14GPM 3000PSI 800RPM TRIPLEX HIGH PRESSURE CAR WASH PLUNGER PUMP, US $2,999.99 – Picture 6

CAT 3517 30HP 14GPM 3000PSI 800RPM TRIPLEX HIGH PRESSURE CAR WASH PLUNGER PUMP, US $2,999.99 – Picture 7

CAT 3517 30HP 14GPM 3000PSI 800RPM TRIPLEX HIGH PRESSURE CAR WASH PLUNGER PUMP, US $2,999.99 – Picture 8

CAT 3517 30HP 14GPM 3000PSI 800RPM TRIPLEX HIGH PRESSURE CAR WASH PLUNGER PUMP, US $2,999.99 – Picture 9

Cat 3517 30hp 14gpm 3000psi 800rpm Triplex High Pressure Car Wash Plunger Pump

US $2,999.99

Livermore, California, United States
Jan 29th

Open on mobile:
QR code

(1) - CAT PUMPS 3517 4GPM 100-3000PSI 800RMP PUMP (1) - BROOK CROMPTON HANSEN INVENSYS 22KW 30HP WU-DA 180 LJ WU-DA180LJ MOTOR (1) - CUSTOM STAINLESS STEEL BASE This is a used working item in good cosmetic condition that was pulled from a working environment and is guaranteed working This is a triplex [three plunger rods] positive displacement, reciprocating, plunger pump, constructed of Nickel Aluminum Bronze manifolds and 316SS valve assemblies. Also included in this auction is a high efficiency 30HP 22KW 1784RPM motor mounted on a custom stainless steel base that will get the pump to its maximum flow of 14GPM and pressure of 3000PSI and 800RPM. See additional information for the motors and pumps specifications. There is some corrosion on top of the motor, however this does not affect the units functionality whatsoever. The power cable has been cut and the unit will need to wired to the buyers preference. See photos for details. WE RECOMMENDED THAT THE BUYER CHECK THE OIL LEVEL BEFORE POWERING ON THE PUMP! ADDITIONAL MANUFACTURER INFORMATION/LITERATURE/CAD DRAWINGS This is a triplex [three plunger rods] positive displacement, reciprocating, plunger pump, constructed of Nickel Aluminum Bronze manifolds, 316SS valve assemblies, solid ceramic plungers and standard NBR [Buna-N] seals and o-rings. These higher capacity plunger pumps are suitable for multi-gun and multi-nozzle, high pressure systems. and pumping special liquids such as salt water. MODEL 3517 Flow .................................................................14 GPM (53 L/M) Pressure Range ..................................100 to 3000 PSI (7 to 210 BAR) RPM...............................................................800 RPM (800 RPM) Bore ....................................................................0.984" (25 mm) Discharge Ports (2) .........................................1" NPTF (1" NPTF) WU-DA180LJ MOTOR SPECIFICATIONS: 50Hz: kW: 22.0 V:D/Y 380-420/660-725 A:43.0-39.0/25.0-22.8 r/min RPM: 1470 60Hz: kW: 25.3 V:D/Y 440-480/760-830 A: 43.0-39.0/25.0-22.8 r/min RPM:1764 COS 0: 0.84 PHASE: 3 DUTY:S1 CLASS:F AMB:40C RISE:80K IP:55 YR:05 IC:411 Powered by SixBit's eCommerce Solution

Condition	Used : An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
Seller Notes	“This is a used working item in good cosmetic condition that was pulled from a working environment and is guaranteed working”