+ Post new Ad
Cat 50 to 2MT Adapter Tool Holder Universal Eng 463643 Enco 1/2 Chuck, US $75.00 – Picture 0
Cat 50 to 2MT Adapter Tool Holder Universal Eng 463643 Enco 1/2 Chuck, US $75.00 – Picture 1
Cat 50 to 2MT Adapter Tool Holder Universal Eng 463643 Enco 1/2 Chuck, US $75.00 – Picture 0
Cat 50 to 2MT Adapter Tool Holder Universal Eng 463643 Enco 1/2 Chuck, US $75.00 – Picture 1

Cat 50 To 2mt Adapter Tool Holder Universal Eng 463643 Enco 1/2 Chuck

US $75.00

  • Milton Freewater, Oregon, United States
  • May 1st
Open on mobile:
QR code
Good usable condition Comes as shown in photos. Please look carefully at the photos Will ship by Expedited Mail Service and cost $0.00.
“Good usable codition the MT arbor is stuck in the adapter and the tang is mushroomed it is not going to be removed with out some work.”
Country/Region of Manufacture United States
Model 463643
Brand Universal Eng

Directions

Similar products from CT Tapers & Holders

Tool Holders, (3) SCULLY-JONES 8A-65641 CS1382-4-F & 4C CNC Tool Holders

Tool Holders, (3) SCULLY-JONES 8A-65641 CS1382-4-F & 4C CNC Tool Holders

  • Saunderstown, Rhode Island, United States
  • May 7th
USED UNIVERSAL ENG. CAT45 ACURA GRIP COLLET CHUCK (For 1/2" Capacity) 911707

USED UNIVERSAL ENG. CAT45 ACURA GRIP COLLET CHUCK (For 1/2" Capacity) 911707

  • Fairfield, Iowa, United States
  • May 6th
PARLEC CAT40 TG100 COLLET CHUCK MORE TOOLING LISTED CAT 40 TG 100 LOT C12217

PARLEC CAT40 TG100 COLLET CHUCK MORE TOOLING LISTED CAT 40 TG 100 LOT C12217

  • Dayton, Ohio, United States
  • May 5th
PARLEC CAT40 TG100 COLLET CHUCK MORE TOOLING LISTED CAT 40 TG 100 LOT C12220

PARLEC CAT40 TG100 COLLET CHUCK MORE TOOLING LISTED CAT 40 TG 100 LOT C12220

  • Dayton, Ohio, United States
  • May 5th
CARBOLOY SECO CAT40 5/16" DIAMETER ENDMILL HOLDER CAT 40 END MILL LOT C12564

CARBOLOY SECO CAT40 5/16" DIAMETER ENDMILL HOLDER CAT 40 END MILL LOT C12564

  • Dayton, Ohio, United States
  • May 5th
NEW TMS BILZ SIZE #1 RIGID TAP DRIVER COMMAND CAT 40 ADAPTER STOCK #A5

NEW TMS BILZ SIZE #1 RIGID TAP DRIVER COMMAND CAT 40 ADAPTER STOCK #A5

  • Cleveland, Ohio, United States
  • May 4th
CAT 40 PULL STUD Retention knob 45deg 5/8 11,lot of 15

CAT 40 PULL STUD Retention knob 45deg 5/8 11,lot of 15

  • Hazleton, Pennsylvania, United States
  • May 4th
Bilz WFLK 340 BM/1.1/2

Bilz WFLK 340 BM/1.1/2" Tap Adapter Chuck - show original title

  • Leland, Illinois, United States
  • May 3rd
Kennametal CV40EM025250, 3292CFO CAT40 Toold Holder

Kennametal CV40EM025250, 3292CFO CAT40 Toold Holder

  • Bristol, Connecticut, United States
  • May 2nd
4 USED CAT40 Tool Holder Retention Knobs

4 USED CAT40 Tool Holder Retention Knobs

  • Bristol, Connecticut, United States
  • May 2nd
SPI 74-105 shell mill holder

SPI 74-105 shell mill holder

  • Warren, Michigan, United States
  • May 1st
Key Products Right Angle Attachment (Inv.33172)

Key Products Right Angle Attachment (Inv.33172)

  • Portland, Connecticut, United States
  • Apr 30th
WELL USED KAISER EXTENSION ADAPTER 10.331.661 KA6xKA6xC3.94

WELL USED KAISER EXTENSION ADAPTER 10.331.661 KA6xKA6xC3.94

  • Fairfield, Iowa, United States
  • Apr 30th
SANDVIK RUBBERFLEX COLLET TAP CHUCK W/ DiN CAT 40 ADAPTER

SANDVIK RUBBERFLEX COLLET TAP CHUCK W/ DiN CAT 40 ADAPTER

  • Cleveland, Ohio, United States
  • Apr 29th
AutoCon Tree T4205156Bc Operator Panel Mtb Interface Board

AutoCon Tree T4205156Bc Operator Panel Mtb Interface Board

  • Sarasota, Florida, United States
  • Apr 28th
NEW TOOLMEX BISON CAT50 to CAT40 ADAPTER (7-184-504) CAT 50 to CAT 40 CV CT

NEW TOOLMEX BISON CAT50 to CAT40 ADAPTER (7-184-504) CAT 50 to CAT 40 CV CT

  • Fairfield, Iowa, United States
  • Apr 27th
CHUCK CAT 30 ERC 25A LOT OF 12

CHUCK CAT 30 ERC 25A LOT OF 12

  • Ashdod, Israel
  • Apr 26th
31 Pcs. Bison CAT40 ER 32 CNC Chucks & Collets Package-12 Chuck,18 Collet,Wrench

31 Pcs. Bison CAT40 ER 32 CNC Chucks & Collets Package-12 Chuck,18 Collet,Wrench

  • Hamden, Connecticut, United States
  • Apr 26th
ETM HOLDING TOOL ADAPTER TOOL HOLDER NO 50-1" W/ DRILL BIT

ETM HOLDING TOOL ADAPTER TOOL HOLDER NO 50-1" W/ DRILL BIT

  • Glendale, California, United States
  • Apr 25th
Techniks CNC CAT40 x ER32-4" Collet Chuck #22255

Techniks CNC CAT40 x ER32-4" Collet Chuck #22255

  • Independence, Missouri, United States
  • Apr 24th

People who viewed this item also vieved

Used No.3 to No.4 Morse Taper Drill Sleeve or Adaptor, Collis

Used No.3 to No.4 Morse Taper Drill Sleeve or Adaptor, Collis

  • Minneapolis, Minnesota, United States
  • Jan 30th
BRAND NEW NST 50-#5 MORSE TAPER ADAPTER MADE IN POLAND FREE SHIPPING

BRAND NEW NST 50-#5 MORSE TAPER ADAPTER MADE IN POLAND FREE SHIPPING

  • Seekonk, Massachusetts, United States
  • Jan 30th
ISCAR TOOL HOLDER MRGNL-20-6

ISCAR TOOL HOLDER MRGNL-20-6

  • New Britain, Connecticut, United States
  • Jan 30th
Two Valenite Boring, Grooving, Threading Bars marked G-TB-175 L.H. 1-1/2" Shank

Two Valenite Boring, Grooving, Threading Bars marked G-TB-175 L.H. 1-1/2" Shank

  • Lake Village, Indiana, United States
  • Jan 30th
Jacobs 0065231 DIN 371 Clutch Tap Collet No.1 M8 8.0mm & 6.2mm Drive Square

Jacobs 0065231 DIN 371 Clutch Tap Collet No.1 M8 8.0mm & 6.2mm Drive Square

  • Wichita, Kansas, United States
  • Jan 30th
Jacobs Chuck 0065225 DIN 371 Clutch Tapping Collet 1 M3 3.5mm Shank 2.7mm

Jacobs Chuck 0065225 DIN 371 Clutch Tapping Collet 1 M3 3.5mm Shank 2.7mm

  • Wichita, Kansas, United States
  • Jan 30th
NEW DODGE 119100 TAPER LOCK 1/2 IN BUSHING B296547

NEW DODGE 119100 TAPER LOCK 1/2 IN BUSHING B296547

  • Buffalo, New York, United States
  • Jan 30th
LOT 2 NEW 2012 1-1/4 TAPER LOCK BUSHING 1-1/4IN BORE D387819

LOT 2 NEW 2012 1-1/4 TAPER LOCK BUSHING 1-1/4IN BORE D387819

  • Delta, Ohio, United States
  • Jan 30th
1 pc Keyless 1/32-3/8" Cap 3/8"-24UNF Mount Drill Chuck

1 pc Keyless 1/32-3/8" Cap 3/8"-24UNF Mount Drill Chuck

  • McHenry, Illinois, United States
  • Jan 30th
JACOBS CHUCK 6A 33 TAPER 0-1/2" CAPACITY DRILL PRESS CHUCK 3/4" SHANK DIAMETER

JACOBS CHUCK 6A 33 TAPER 0-1/2" CAPACITY DRILL PRESS CHUCK 3/4" SHANK DIAMETER

  • La Puente, California, United States
  • Jan 30th
INGERSOLL 10 x AOMT 160532R IN 2015 NEW!!!

INGERSOLL 10 x AOMT 160532R IN 2015 NEW!!!

  • Duisburg, Germany
  • Jan 30th
Iscar 1.0" Square Shank Lathe Threading Tool SER 1000 M16

Iscar 1.0" Square Shank Lathe Threading Tool SER 1000 M16

  • Johnson City, New York, United States
  • Jan 30th
ACROLOC HURCO M12 drill chuck toolholders total of 3 jacobs taper #2

ACROLOC HURCO M12 drill chuck toolholders total of 3 jacobs taper #2

  • Hoosick Falls, New York, United States
  • Jan 30th
KAISER SWISS FINISH BORING HEAD 1-5/8" - 2-1/8" RANGE W/ CAT 40 STOCK #C8

KAISER SWISS FINISH BORING HEAD 1-5/8" - 2-1/8" RANGE W/ CAT 40 STOCK #C8

  • Cleveland, Ohio, United States
  • Jan 30th
CV45 Taper Tool Holders Universal, Lyndex, Other

CV45 Taper Tool Holders Universal, Lyndex, Other

  • Martinsville, Virginia, United States
  • Feb 13th
Genuine Aloris AXA Wedge tool post holder with 4 Tool Holders

Genuine Aloris AXA Wedge tool post holder with 4 Tool Holders

  • United States
  • Feb 13th
Spindle liner Mazak QT100, for 1/38 stock, Made in Ca, please read notes

Spindle liner Mazak QT100, for 1/38 stock, Made in Ca, please read notes

  • Huntington Beach, California, United States
  • Mar 25th
1.5KW AIR-COOLE SPINDLE MOTOR CNC MILL ENGRAVING ER16&1.5kw INVERTER DRIVE VFD

1.5KW AIR-COOLE SPINDLE MOTOR CNC MILL ENGRAVING ER16&1.5kw INVERTER DRIVE VFD

  • Door to door service shanghai, China
  • Mar 25th
18 Sunnen Mandrel

18 Sunnen Mandrel

  • Stockton, California, United States
  • Mar 26th
SET OF ACRO-LAP LAPPING TOOLS W/ NEW REPLACEMENT BARRELS

SET OF ACRO-LAP LAPPING TOOLS W/ NEW REPLACEMENT BARRELS

  • Ellington, New York, United States
  • Mar 27th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies