+ Post new Ad
CAT40 Retention Knob, Pull Stud 90 Degree, Standard Type, Lot of 12 Pull Studs, US $89 – Picture 0
CAT40 Retention Knob, Pull Stud 90 Degree, Standard Type, Lot of 12 Pull Studs, US $89 – Picture 0

Cat40 Retention Knob, Pull Stud 90 Degree, Standard Type, Lot Of 12 Pull Studs

US $89

  • Fremont, California, United States
  • Jun 10th
Open on mobile:
QR code
Picture shows 11 pull studs. BUT THE BUY IT NOW PRICE IS FOR A LOT OF 12 EACH(YOU' LL GET 12) CAT40 Retention Knob 90 DegreeCAT40 Pull Stud 90 Degree Standard Type = .988 Dimension (SEE PICTURE) GOOD USED WORKING ORDER COME AS SHOWN PLEASE Look at the pictures/scans THEN bid or buy accordingly IN your opinion. THANK YOU FOR LOOKING AND PLEASE CHECK OUT MY OTHER LISTINGS. TESTING, CHECKING, AND Local pick-up are highly encouraged. SHIPPING TO 48 LOWER STATE. INTERNATIONAL BUYER, PLEASE NOTE: BUYER IS RESPONSIBLE FOR ARRANGING ALL INTERNATIONAL FREIGHT. INCLUDING ALL PAPERWORK AND INSURANCE FOR ITEMS PURCHASED. IMPORT DUTIES, TAXES AND OTHER CHARGES ARE NOT INCLUDED IN THE ITEM PRICE OR SHIPPING COST.THESE CHARGES ARE THE BUYERS RESPONSIBILITY. PLEASE CHECK WITH YOUR COUNTRY'S CUSTOMS OFFICE TO DETERMINE WHAT THE ADDITIONAL COSTS WILL BE PRIOR TO BIDDING OR BUYING.

Directions

Similar products from BT Tool Holders

HONE MFG. BT-40 END MILL TOOLHOLDER CNC MACHINING 1/2" (.500")

HONE MFG. BT-40 END MILL TOOLHOLDER CNC MACHINING 1/2" (.500")

  • Fullerton, California, United States
  • Jun 10th
ERICKSON TOOL BT-40 END MILL TOOLHOLDER CNC MACHINING 5/16" (.3125")

ERICKSON TOOL BT-40 END MILL TOOLHOLDER CNC MACHINING 5/16" (.3125")

  • Fullerton, California, United States
  • Jun 10th
HONE MFG. CO. BT-40 END MILL TOOLHOLDER CNC MACHINING 1/2" (.500")

HONE MFG. CO. BT-40 END MILL TOOLHOLDER CNC MACHINING 1/2" (.500")

  • Fullerton, California, United States
  • Jun 10th
VALENITE BT-40 END MILL TOOLHOLDER CNC MACHINING 1/2" (.500")

VALENITE BT-40 END MILL TOOLHOLDER CNC MACHINING 1/2" (.500")

  • Fullerton, California, United States
  • Jun 10th
COMMAND BT-40 END MILL TOOLHOLDER CNC MACHINING 1/2" (.500")

COMMAND BT-40 END MILL TOOLHOLDER CNC MACHINING 1/2" (.500")

  • Fullerton, California, United States
  • Jun 10th
COMMAND BT-40 END MILL TOOLHOLDER CNC MACHINING 3/4" (.750")

COMMAND BT-40 END MILL TOOLHOLDER CNC MACHINING 3/4" (.750")

  • Fullerton, California, United States
  • Jun 10th
ERICKSON TOOL BT-40 END MILL TOOLHOLDER CNC MACHINING 1/2" (.500")

ERICKSON TOOL BT-40 END MILL TOOLHOLDER CNC MACHINING 1/2" (.500")

  • Fullerton, California, United States
  • Jun 10th
3/4" Nikken BT 40 Taper BT40-WE3/4-65 End Mill Tool Holder, Used, WARRANTY

3/4" Nikken BT 40 Taper BT40-WE3/4-65 End Mill Tool Holder, Used, WARRANTY

  • Grand Rapids, Michigan, United States
  • Jun 10th
YG. BT 40, 1-1/4" Stub Arbor End Mill / Face / Shell / Mill Holder Used

YG. BT 40, 1-1/4" Stub Arbor End Mill / Face / Shell / Mill Holder Used

  • Lake Village, Indiana, United States
  • Jun 10th
BT 40 Taper Shank. PINSBOHR Boring Head, 29 To 40 Range.

BT 40 Taper Shank. PINSBOHR Boring Head, 29 To 40 Range.

  • Lake Village, Indiana, United States
  • Jun 10th
Nikken Lyndex BT40 1.25 Shell Mill Holder bt40-fmd25.4-45

Nikken Lyndex BT40 1.25 Shell Mill Holder bt40-fmd25.4-45

  • Edmonds, Washington, United States
  • Jun 10th
~2~ TECHNARA BT-35 200DA COLLET CHUCKS + COLLETS ***VGC*** CNC MILL

~2~ TECHNARA BT-35 200DA COLLET CHUCKS + COLLETS ***VGC*** CNC MILL

  • Highland, New York, United States
  • Jun 10th
~4~ BT-35 TOOL HOLDERS END MILL, SHELL MILL + BORING BAR, CNC MILL ***VGC**

~4~ BT-35 TOOL HOLDERS END MILL, SHELL MILL + BORING BAR, CNC MILL ***VGC**

  • Highland, New York, United States
  • Jun 10th
BT3-SLW12-60 ENDMILL HOLDER

BT3-SLW12-60 ENDMILL HOLDER

  • Oconomowoc, Wisconsin, United States
  • Jun 10th
COMMAND B2C4-0020 ENDMILL HOLDER

COMMAND B2C4-0020 ENDMILL HOLDER

  • Oconomowoc, Wisconsin, United States
  • Jun 10th
PARLEC END MILL TOOLHOLDER, C40-37EM1

PARLEC END MILL TOOLHOLDER, C40-37EM1

  • Tucson, Arizona, United States
  • Jun 10th
CAT50 Retention Knob, Pull Stud 60 Degree, Standard Type

CAT50 Retention Knob, Pull Stud 60 Degree, Standard Type

  • Fremont, California, United States
  • Jun 10th
CAT50 Retention Knob, Pull Stud 90 Degree, Standard Type

CAT50 Retention Knob, Pull Stud 90 Degree, Standard Type

  • Fremont, California, United States
  • Jun 10th
Lathe / Mill Collet Rack, Swiveling, R8, Southbend, Hardinge, Bridgeport

Lathe / Mill Collet Rack, Swiveling, R8, Southbend, Hardinge, Bridgeport

  • Scottsdale, Arizona, United States
  • Jun 10th
BT50 ER40 MILLING COLLET CHUCK SET 23 PCs 1/8" - 1" ER COLLETS CHUCK 3.94" Proj

BT50 ER40 MILLING COLLET CHUCK SET 23 PCs 1/8" - 1" ER COLLETS CHUCK 3.94" Proj

  • Diamond Bar, California, United States
  • Jun 9th

People who viewed this item also vieved

" Bilz" WER2 3/8" Pipe Quick Change Tap Holder lot of 2 Pcs

" Bilz" WER2 3/8" Pipe Quick Change Tap Holder lot of 2 Pcs

  • Coventry, Rhode Island, United States
  • Jan 30th
New Power Logic Groupe Schneider CVM Module

New Power Logic Groupe Schneider CVM Module

  • Leopolis, Wisconsin, United States
  • Jan 30th
VALENITE LATHE CUTOFF/GROOVING BAR V-CUT PLUS VHR-619-24C 078 STK 888

VALENITE LATHE CUTOFF/GROOVING BAR V-CUT PLUS VHR-619-24C 078 STK 888

  • Wadley, Alabama, United States
  • Jan 30th
USED VALENITE VARI-SET BORING HEAD RBN-16P (SPG-322)

USED VALENITE VARI-SET BORING HEAD RBN-16P (SPG-322)

  • Fairfield, Iowa, United States
  • Jan 30th
LOT 9 NEW CHICAGO PNEUMATIC CA091545 MECHANICAL BUSHING 7/16 IN D224178

LOT 9 NEW CHICAGO PNEUMATIC CA091545 MECHANICAL BUSHING 7/16 IN D224178

  • Delta, Ohio, United States
  • Jan 30th
LOT 4 NEW BOSTON GEAR B-810-09 MECHANICAL BUSHINGS D224115

LOT 4 NEW BOSTON GEAR B-810-09 MECHANICAL BUSHINGS D224115

  • Delta, Ohio, United States
  • Jan 30th
MADE IN USA CAT50 1" END MILL HOLDER GOOD CONDITION CAT 50 END MILL LOT C3678

MADE IN USA CAT50 1" END MILL HOLDER GOOD CONDITION CAT 50 END MILL LOT C3678

  • Dayton, Ohio, United States
  • Jan 30th
MADE IN USA CAT50 1" DIA END MILL HOLDER GREAT CONDITION CAT 50 LOT C3072

MADE IN USA CAT50 1" DIA END MILL HOLDER GREAT CONDITION CAT 50 LOT C3072

  • Dayton, Ohio, United States
  • Jan 30th
12 X10 " MAGNETIC CHUCK / SURFACE GRINDER

12 X10 " MAGNETIC CHUCK / SURFACE GRINDER

  • Plainville, Connecticut, United States
  • Jan 30th
DRILL CHUCK KEY FOR 3/4 INCH

DRILL CHUCK KEY FOR 3/4 INCH

  • Chino, California, United States
  • Jan 30th
Lot 1pcs BAP300R C20-20-200 Indexable End Mill Holder Dia 20mm Length 200mm

Lot 1pcs BAP300R C20-20-200 Indexable End Mill Holder Dia 20mm Length 200mm

  • CN, China
  • Jan 30th
Lot 1pcs BAP300R C25-25-150 Indexable End Mill Holder Dia 25mm Length 150mm

Lot 1pcs BAP300R C25-25-150 Indexable End Mill Holder Dia 25mm Length 150mm

  • CN, China
  • Jan 30th
5 new NORTON 7/8" x 2" A11 Mounted Points N4 1/4 x 1-1/2 Charger 30 Grit 16464

5 new NORTON 7/8" x 2" A11 Mounted Points N4 1/4 x 1-1/2 Charger 30 Grit 16464

  • United States
  • Jan 30th
Sunnen G-Y48 Mandrels 2312 TC-2187TC-1957 TB-1750TB-Connecting Rods Set of 4

Sunnen G-Y48 Mandrels 2312 TC-2187TC-1957 TB-1750TB-Connecting Rods Set of 4

  • Plymouth, Indiana, United States
  • Jan 30th
J.H WILLIAMS LATHE TOOL HOLDER THT-2-R

J.H WILLIAMS LATHE TOOL HOLDER THT-2-R

  • Wadley, Alabama, United States
  • Jan 30th
MILL TOOL ADAPTER - PARLEC B40-15SM412

MILL TOOL ADAPTER - PARLEC B40-15SM412

  • Saint Cloud, Minnesota, United States
  • Jan 30th
TSD Universal Engineering 97102, 30 Adjustable Kwik Switch Collet Tool Holder

TSD Universal Engineering 97102, 30 Adjustable Kwik Switch Collet Tool Holder

  • Hopkins, Minnesota, United States
  • Jan 30th
(6) NMTB50 End Mill Tool Holders Beaver Tool, End Mill, Shell, CNC

(6) NMTB50 End Mill Tool Holders Beaver Tool, End Mill, Shell, CNC

  • Hopkins, Minnesota, United States
  • Jan 30th
US ER11 Spindle Motor Seat Electrical Fixture Motor Mounts Inner Diameter 57mm

US ER11 Spindle Motor Seat Electrical Fixture Motor Mounts Inner Diameter 57mm

  • Beijing, China
  • Jan 30th
300w 12000RPM Spindle Motor Mount Bracket 12V-48V Engraver Cutter Marker CNC

300w 12000RPM Spindle Motor Mount Bracket 12V-48V Engraver Cutter Marker CNC

  • Beijing, China
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies