TESTING & COSMETIC NOTES: This is a USED WORKING item in GOOD cosmetic condition that IS THOROUGHLY TESTED and is GUARANTEED WORKING Factory reset has been performed. See console log below for detail. 48V DC Power supply is NOT included. COMPONENTS INCLUDED IN THIS AUCTION: • (1) - CETERUS NETWORKS UTS1530 UTS-1530 MULTI-SERVICE DELIVERY PLATFORM ETHERNET TDM REPLACEMENT or MONEY BACK GUARANTEE: When you receive a Guaranteed item from OC Depot, it should perform as described. In the rare situation that this is not the case, we will send a replacement upon safe return of the original item within 14 days of receiving the item. If a replacement is not available we will honor the terms of our Money-Back Guarantee. ADDITIONAL INFORMATION: The following components are not included: Power Supply VxWorks System Boot Copyright 1984-2002 Wind River Systems, Inc. CPU: Evdo by Ceterus Networks, Inc., 2004 Version: VxWorks5.5.1 BSP version: 1.2/3 Creation date: May 24 2005, 11:25:35 o@d+ Press any key to stop auto-boot... 0 auto-booting... boot device : ata unit number : 0 processor number : 0 file name : /card0/active/SRC/vxWorks flags (f) : 0x0 0x7ff4be8 (tPccard): Card info: 0x7ff4be8 (tPccard): 1 function 0x7ff4be8 (tPccard): ManufCode = 0x0, ManufInfo = 0x0 0x7ff4be8 (tPccard): FuncCode: 0x4 0x7ff4be8 (tPccard): Using pccard config 1 Attaching to ATA disk device... DOS FS has been created... done. dosChkLib : CLOCK_REALTIME is being reset to THU JUL 19 09:29:36 2012 Value obtained from file system volume descriptor pointer: 0x7ffb158 The old setting was THU JAN 01 00:00:05 1970 Accepted system dates are greater than THU DEC 27 00:00:00 1990 /card0// - Volume is OK 9106576 Starting at 0x300000... Error during ataDevCreate: 0 Attaching interface lo0...done Creating proxy network: proxyNetCreate failed:4c0005 Adding 15400 symbols for standalone. wdbConfig: error configuring WDB communication interface ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]] ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]] ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]] ]]]]]]]]]]] ]]]] ]]]]]]]]]] ]] ]]]] (R) ] ]]]]]]]]] ]]]]]] ]]]]]]]] ]] ]]]] ]] ]]]]]]] ]]]]]]]] ]]]]]] ] ]] ]]]] ]]] ]]]]] ] ]]] ] ]]]] ]]] ]]]]]]]]] ]]]] ]] ]]]] ]] ]]]]] ]]]] ]]] ]] ] ]]] ]] ]]]]] ]]]]]] ]] ]]]]]]] ]]]] ]] ]]]] ]]]]] ] ]]]] ]]]]] ]]]]]]]] ]]]] ]] ]]]] ]]]]]]] ]]]] ]]]]]] ]]]]] ]]]]]] ] ]]]]] ]]]] ]] ]]]] ]]]]]]]] ]]]] ]]]]]]] ]]]]] ] ]]]]]] ] ]]] ]]]] ]] ]]]] ]]]] ]]]] ]]]] ]]]]]]]] ]]]]] ]]] ]]]]]]] ] ]]]]]]] ]]]] ]]]] ]]]] ]]]]] ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]] ]]]]]]]]]]]]]]]]]]]]]]]]]]]]] Development System ]]]]]]]]]]]]]]]]]]]]]]]]]]]] ]]]]]]]]]]]]]]]]]]]]]]]]]]] VxWorks version 5.5.1 ]]]]]]]]]]]]]]]]]]]]]]]]]] KERNEL: WIND version 2.6 ]]]]]]]]]]]]]]]]]]]]]]]]] Copyright Wind River Systems, Inc., 1984-2003 CPU: Evdo by Ceterus Networks, Inc., 2004. Proce ssor #0. Memory Size: 0x8000000. BSP version 1.2/3. WDB Comm Type: WDB_COMM_END WDB: Agent configuration failed. dosChkLib : CLOCK_REALTIME is being reset to THU JUL 19 09:29:36 2012 Value obtained from file system volume descriptor pointer: 0x1328db8 The old setting was THU JAN 01 00:00:00 1970 Accepted system dates are greater than THU DEC 27 00:00:00 1990 /card0/ - Volume is OK ** Debug Port is Secured(Locked) ** SYSTEM LINE RATE = 1 0 0x07fffe00 01/01 00:00:39.001 usrAppInit.cpp:116 Reset on exception is ENAB LED (R8!=0x02) - enabling watchdog <Watchdog> tasks created: tHiDog=0x2739E08, tLoDog=0x273E098, checkinSem=0x273E3 28, hbSem=0x273E358 <Watchdog> enabling SW watchdog <Watchdog> Enabling HW watchdog (1FFE0012) <alert> <tRootTask:0x07FFFE00> <0-00:00:05.210> <hilStart.cpp:88> <startHIL2()> **[ Starting HIL with boot options 00000000 <alert> <tRootTask:0x07FFFE00> <0-00:00:05.300> <hilShelf.cpp:159> <HilShelf()> **[ Inventory HW type is evdo('FTD1') <alert> <tRootTask:0x07FFFE00> <0-00:00:05.300> <hilShelf.cpp:182> <HilShelf()> **[ HilShelf Max T1 port = 12 Max FT port = 4 <alert> <tRootTask:0x07FFFE00> <0-00:00:05.310> <hilFpga.cpp:194> <init()> **[ FPGA done not set - loading FPGA from '/card0/active/fpga/utsx10_t1_fpga.r bf' <alert> <tRootTask:0x07FFFE00> <0-00:00:05.310> <hilFpga.cpp:217> <init()> **[ Resetting QuadFALC/FT devices... <alert> <tRootTask:0x07FFFE00> <0-00:00:06.240> <hilFpga.cpp:801> <loadFpga()> **[ FPGA loaded 987869 bytes from '/card0/active/fpga/utsx10_t1_fpga.rbf' in 9 00ms: revision 0x0301_0007. <alert> <tRootTask:0x07FFFE00> <0-00:00:06.240> <hilSyncDriver.cpp:54> <init()> **[ Cold start or invalid config detected - forcing free run <alert> <tRootTask:0x07FFFE00> <0-00:00:06.240> <hilCpld.cpp:551> <enableInt()> **[ Enabling CPLD interrupts <alert> <tRootTask:0x07FFFE00> <0-00:00:06.240> <hilFpga.cpp:718> <enableInt()> **[ Enabling FPGA interrupts MOL INITIALIZATION BEGIN MOL/CP: MolMONE index 0 MOL/CP: MolMOSync index 1 MOL/CP: MolMOThresh index 2 MOL/CP: MolMOEqptHolder index 3 MOL/CP: MolMOT1TP port 1 index 4 MOL/CP: MolMOT1TP port 2 index 5 MOL/CP: MolMOT1TP port 3 index 6 MOL/CP: MolMOT1TP port 4 index 7 MOL/CP: MolMOT1TP port 5 index 8 MOL/CP: MolMOT1TP port 6 index 9 MOL/CP: MolMOT1TP port 7 index 10 MOL/CP: MolMOT1TP port 8 index 11 MOL/CP: MolMOT1TP port 9 index 12 MOL/CP: MolMOT1TP port 10 index 13 MOL/CP: MolMOT1TP port 11 index 14 MOL/CP: MolMOT1TP port 12 index 115 MOL/CP: MolMOETXQTP port 0x1 index 016 MOL/CP: MolMOETXQTP port 7fffe200 index 17 MOL/CP: MolMOETXQTP port 3 index 01/01 00:00:4185 MOL/CP: MolMOETXQTP port .4 index 19 MOL/CP: MolMOVLANTP first VLAN vid 0 slot 1 index 20 MOL/CP: MolMOVLANTP last VLAN vid 4094 slot 4 index 16399 MOL/CP: MolMOVCG vcg 1 index 16400 MOL/CP: MolMOCLIDTP first CLID VCG 1 id 0 index 16401 MOL/CP: MolMOCLIDTP last CLID VCG 1 id 15 index 16416 002 dbCoreAdminObj.cpp:100 DB: Declare database ready: 0 MolThreshInfo::initializeT1Thresholds: NOT DONE! molCP/molMOSync.cpp:1055:initDB(): DB record (table 10010 key 1) not found (rc=2 ) 2 0x034c40c8 01/01 00:00:58.003 molNotificationInit.cpp:364 MolNotifServer(): MolNotifServer(molNotificationTask) Created. delMgmtIpAddr : ifFlagChange failed for 0 motfcc SNTP: Primary Server IP set to SNTP: Secondary Server IP set to base initialize 3 0x02760688 01/01 00:00:59.004 mirrorObj.cpp:369 MIRROR: MirrorObj received enable message request 4 0x03469560 01/01 00:00:59.005 molCP.cpp:1795 MOL: DBMirroring enabled 5 0x03469560 01/01 00:00:59.006 molCP.cpp:759 MOL: init1 complete. Total MOs 16417 MO size 985020 DB size 4294988 MOL INITIALIZATION COMPLETE MOL/CP: LED task ready. MOL/CP: NOTIF task ready. MOL BE system restart (POWERUP/COLD/1) MOL/CP: BE task ready. Starting MIL... MIL : enabling logging ... (E):32833539: Sending Mesg from Client MIL : starting tl1 engine ... DB Login SUCCEEDED for SecuDb : 0 tl1_register_rpts success ... MIL : started tl1 engine ... MIL : starting web server ... web session hndlrs registered goahead : level (0) : webs: Listening for HTTP requests at address 255.255.255.2 55 MIL : started web server ... DB Login SUCCEEDED for MgmtPort : 0 MIL : starting CLI ... MIL : started CLI ... MIL : ready ... asap lookup failed for modifier(1) and pc(15) asap lookup failed for modifier(1) and pc(15) 6 0x03469560 01/01 00:01:02.007 molCP.cpp:619 MOL: init2 complete. Entering m olCPMain() loop Enter ************ logInitialize MIL : logging enabled ... MIL Done... RadiusManager.cpp:660 found 0 Radius servers in the database RadiusManager.cpp:678 RADIUS init done ******* Restart reason = 1Init Mgr released snmp event Connecting MolReqRespServer Connecting MolReqRespServer Connecting MolNotifServer Length of Registered mib array 11 Registered 11 subtrees. <alert> <HilPollTask:0x02751E20> <0-00:00:34.240> <hilT1Port.cpp:291> <poll()> **[ T1 0 LOS set after cold start - resetting port <alert> <HilPollTask:0x02751E20> <0-00:00:34.240> <hilT1Port.cpp:291> <poll()> **[ T1 1 LOS set after cold start - resetting port <alert> <HilPollTask:0x02751E20> <0-00:00:34.240> <hilT1Port.cpp:291> <poll()> **[ T1 2 LOS set after cold start - resetting port <alert> <HilPollTask:0x02751E20> <0-00:00:34.240> <hilT1Port.cpp:291> <poll()> **[ T1 3 LOS set after cold start - resetting port <alert> <HilPollTask:0x02751E20> <0-00:00:34.240> <hilT1Port.cpp:291> <poll()> **[ T1 4 LOS set after cold start - resetting port <alert> <HilPollTask:0x02751E20> <0-00:00:34.240> <hilT1Port.cpp:291> <poll()> **[ T1 5 LOS set after cold start - resetting port M<alert> <HilPollTask:0x02751E20> <0-00:00:34.240> <hilT1Port.cpp:291> <poll()> **[ T1 6 LOS set after cold start - resetting port IL : rem<alert> <HilPollTask:0x02751E20> <0-00:00:34.240> <hilT1Port.cpp:291> <p oll()> **[ T1 7 LOS set after cold start - resetting port ote oamp<alert> <HilPollTask:0x02751E20> <0-00:00:34.240> <hilT1Port.cpp:291> <p oll()> **[ T1 8 LOS set after cold start - resetting port initial<alert> <HilPollTask:0x02751E20> <0-00:00:34.240> <hilT1Port.cpp:291> <p oll()> **[ T1 9 LOS set after cold start - resetting port ized ..<alert> <HilPollTask:0x02751E20> <0-00:00:34.240> <hilT1Port.cpp:291> <p oll()> **[ T1 10 LOS set after cold start - resetting port . <alert> <HilPollTask:0x02751E20> <0-00:00:34.240> <hilT1Port.cpp:291> <poll()> **[ T1 11 LOS set after cold start - resetting port EOC/eoc.cpp:463 EOC init done EOC/EocServer.cpp:343 EOC init done SNMP: Reset Reason from Platform = 1 SNMP: Reset Reason input Parameter = 1 SNMP:Reset Reason == COLD in sendStartTrap LocalMirror: copying DBWORK.DBD LocalMirror: copying MIL.KEY LocalMirror: copying MIL_CET.DAT LocalMirror: copying MIL_PRT.DAT LocalMirror: copying MIL_SEC.DAT LocalMirror: copying MIL_USR.DAT LocalMirror: copying MOL.KEY LocalMirror: copying MOL_ALM.DAT LocalMirror: copying MOL_CLD.DAT LocalMirror: copying MOL_EQP.DAT LocalMirror: copying MOL_FX1.DAT LocalMirror: copying MOL_NET.DAT LocalMirror: copying MOL_SYN.DAT LocalMirror: copying MOL_T1D.DAT LocalMirror: copying MOL_T3D.DAT LocalMirror: copying MOL_THR.DAT LocalMirror: copying MOL_VCG.DAT LocalMirror: copying MOL_VLN.DAT LocalMirror: copying PM.DAT LocalMirror: copying PM.KEY LocalMirror: copying RDM.INI LocalMirror: copying UTS.DBD Please Click Here and Read Our Sales Policies SearchBy8 - 56125 | Loc: D12 | L: Tommy | T: | QTY: 3 | Plan: Q4 5 pounds or more | 0"x0"x0" 11lbs | Start: $0.00 | BIN: $129.99 | | 1/22/2014 12:00:00 AM | Used | Powered by SixBit's eCommerce Solution
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
