+ Post new Ad
Champion CS6X-1/4 Contractor Series Aircraft Extension Drill, US $3.69 – Picture 0
Champion CS6X-1/4 Contractor Series Aircraft Extension Drill, US $3.69 – Picture 1
Champion CS6X-1/4 Contractor Series Aircraft Extension Drill, US $3.69 – Picture 2
Champion CS6X-1/4 Contractor Series Aircraft Extension Drill, US $3.69 – Picture 0
Champion CS6X-1/4 Contractor Series Aircraft Extension Drill, US $3.69 – Picture 1
Champion CS6X-1/4 Contractor Series Aircraft Extension Drill, US $3.69 – Picture 2

Champion Cs6x-1/4 Contractor Series Aircraft Extension Drill

US $3.69

  • Wood Dale, Illinois, United States
  • Jan 30th
Open on mobile:
QR code
 Champion CS6X-1/4 Contractor Series Aircraft Extension Drill The flute length on these drills is the same as a standard jobber drill. Single piece construction. Used for drilling holes in hard to reach places, especially in aircraft assembly work Spring tempered shanks prevent permanent bending when drilling holes not in direct alignment. Low carbon steels, alloyed steels, steel drop forgings, grey cast iron, titanium, stainless steel, nimonic alloys, manganese, spring steels. 135? Split Point Black Oxide Treated High Speed Steel Contractor Series
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Brand Champion
Country/Region of Manufacture United States
Model CS6X-1/4

Directions

Similar products from Extended Length Drills

Irwin 66732 1/2” x 6" Aircraft Extension Drill Bit

Irwin 66732 1/2” x 6" Aircraft Extension Drill Bit

  • Oshkosh, Wisconsin, United States
  • Jan 30th
Ace 2107894 1/2” x 6" Aircraft Extension Drill Bit

Ace 2107894 1/2” x 6" Aircraft Extension Drill Bit

  • Oshkosh, Wisconsin, United States
  • Jan 30th
NEW PRECISION TWIST DRILL 33.0 MM 1.300 HSS USA 1405

NEW PRECISION TWIST DRILL 33.0 MM 1.300 HSS USA 1405

  • Tekamah, Nebraska, United States
  • Jan 30th
HSS Twist Drill Bit 2.26

HSS Twist Drill Bit 2.26

  • Salem, New Hampshire, United States
  • Jan 30th
HSS Twist Drill Bit 2.69mm

HSS Twist Drill Bit 2.69mm

  • Salem, New Hampshire, United States
  • Jan 30th
HSS Twist Drill Bit 7.1mm

HSS Twist Drill Bit 7.1mm

  • Salem, New Hampshire, United States
  • Jan 30th
13/32" (.4063) HSS Extra Long Drill Bit

13/32" (.4063) HSS Extra Long Drill Bit

  • Lebanon, New Jersey, United States
  • Jan 30th
NOS #20 - No. 20 - Number 20 Wire Size HSS 12" Aircraft Extension Drill Bit USA

NOS #20 - No. 20 - Number 20 Wire Size HSS 12" Aircraft Extension Drill Bit USA

  • McQueeney, Texas, United States
  • Jan 30th
1 Dozen, #20 - No. 20 - Number 20 HSS 12" Aircraft Extension Twist Drill Bit USA

1 Dozen, #20 - No. 20 - Number 20 HSS 12" Aircraft Extension Twist Drill Bit USA

  • McQueeney, Texas, United States
  • Jan 30th
Alfa C3F50536 5/8" x 82 Degree 3 Flute HSS Countersink 3/8" Shank Center Reamer

Alfa C3F50536 5/8" x 82 Degree 3 Flute HSS Countersink 3/8" Shank Center Reamer

  • Denver, Colorado, United States
  • Jan 30th
Precision Twist , PTD, extension 12" long, Drill bit, 1/2", M7, Qty 1

Precision Twist , PTD, extension 12" long, Drill bit, 1/2", M7, Qty 1

  • Maryland Heights, Missouri, United States
  • Jan 30th
US Tool Aircraft extension Drill bit, size 12 ( .189 ), Qty 1

US Tool Aircraft extension Drill bit, size 12 ( .189 ), Qty 1

  • Maryland Heights, Missouri, United States
  • Jan 30th
LOT OF 12!! PRECISION TWIST DRILL 058003 BLACK OXIDE HSS EXTRA LENGTH -surplus

LOT OF 12!! PRECISION TWIST DRILL 058003 BLACK OXIDE HSS EXTRA LENGTH -surplus

  • Calexico, California, United States
  • Jan 30th
CLEVELAND 31/64" PARABOLIC TAPER LENGTH DRILL

CLEVELAND 31/64" PARABOLIC TAPER LENGTH DRILL

  • Cadiz, Kentucky, United States
  • Jan 30th
7/8" Drill Bit (Inv.30185)

7/8" Drill Bit (Inv.30185)

  • Portland, Connecticut, United States
  • Jan 30th
AIRCRAFT EXTENSION DRILL .186" DIAMETER 6" OVERALL HIGH SPEED GUHRING NEW $2.30

AIRCRAFT EXTENSION DRILL .186" DIAMETER 6" OVERALL HIGH SPEED GUHRING NEW $2.30

  • North Tonawanda, New York, United States
  • Jan 30th
CLEVELAND BU11211 1-1/4 TS COBALT RAIL DRILLS (D3064-1)

CLEVELAND BU11211 1-1/4 TS COBALT RAIL DRILLS (D3064-1)

  • Miami, Florida, United States
  • Jan 30th
CLEVELAND 281403 8.00MM TS COBALT RAIL DRILLS (D3057-6)

CLEVELAND 281403 8.00MM TS COBALT RAIL DRILLS (D3057-6)

  • Miami, Florida, United States
  • Jan 30th
CLEVELAND 21.00MM TS COBALT RAIL DRILLS (D3070-1)

CLEVELAND 21.00MM TS COBALT RAIL DRILLS (D3070-1)

  • Miami, Florida, United States
  • Jan 30th
DRILL HIGH SPEED LONG LENGTH 9/32" (.2812) x 5-1/2" FLUTE x 8" OAL USA NEW $6.50

DRILL HIGH SPEED LONG LENGTH 9/32" (.2812) x 5-1/2" FLUTE x 8" OAL USA NEW $6.50

  • North Tonawanda, New York, United States
  • Jan 30th

People who viewed this item also vieved

USED OSG JAPAN SOLID CARBIDE 11/16" COOLANT TWIST DRILL .6875"

USED OSG JAPAN SOLID CARBIDE 11/16" COOLANT TWIST DRILL .6875"

  • Fairfield, Iowa, United States
  • May 20th
CJT KOOLCARB .2500" Carbide Tipped Coolant Feed Drill

CJT KOOLCARB .2500" Carbide Tipped Coolant Feed Drill

  • Johnson City, New York, United States
  • May 21st
CJT KOOLCARB .1875" Carbide Tipped Coolant Feed Drill

CJT KOOLCARB .1875" Carbide Tipped Coolant Feed Drill

  • Johnson City, New York, United States
  • May 21st
New 7pcs quick change tapping chunck & collets M3-M12 ISO standard collets s

New 7pcs quick change tapping chunck & collets M3-M12 ISO standard collets s

  • cn,cn, China
  • Jun 2nd
FOUR NEW MILWAUKEE 7/16" X 6" CARBON TIP MASONRY BITS - #48-87-0430 - FREE S/H

FOUR NEW MILWAUKEE 7/16" X 6" CARBON TIP MASONRY BITS - #48-87-0430 - FREE S/H

  • United States
  • Jun 3rd
Cle-Forge,No.943,High Speed Drill,No.1 Taper Shank,Size 11 M-M,New

Cle-Forge,No.943,High Speed Drill,No.1 Taper Shank,Size 11 M-M,New

  • Scranton, Pennsylvania, United States
  • Jun 3rd
AMEC ALLIED SPADE DRILL SERIES #1.5 T-A STD 1" SS 24015S-100L 1" SHANK C12241

AMEC ALLIED SPADE DRILL SERIES #1.5 T-A STD 1" SS 24015S-100L 1" SHANK C12241

  • Dayton, Ohio, United States
  • Jun 9th
3/4 x 82° 4 Flute Carbide Countersink 1/2 Shank 2 3/4 OAL NEW Severance 1 pc

3/4 x 82° 4 Flute Carbide Countersink 1/2 Shank 2 3/4 OAL NEW Severance 1 pc

  • Allen Park, Michigan, United States
  • Jun 10th
1/2 x 60° 6 Flute Carbide Countersink 3/8 Shank 2 3/4 OAL NEW Melin 1 pc

1/2 x 60° 6 Flute Carbide Countersink 3/8 Shank 2 3/4 OAL NEW Melin 1 pc

  • Allen Park, Michigan, United States
  • Jun 10th
SUMITOMO Carbide Coolant Through Drill MDS058MHV <455>

SUMITOMO Carbide Coolant Through Drill MDS058MHV <455>

  • Saint Louis, Missouri, United States
  • May 26th
NEW YG-1 P15102 Spade Drill Holder 45/64&#034; to 15/16&#034; Coolant Fed (24010S-100L)

NEW YG-1 P15102 Spade Drill Holder 45/64" to 15/16" Coolant Fed (24010S-100L)

  • Round Lake, Illinois, United States
  • May 26th
30.16mm Kennametal 1.156&#034; KSEM Modular Indexable Drill (JyJ)

30.16mm Kennametal 1.156" KSEM Modular Indexable Drill (JyJ)

  • Dallas, Texas, United States
  • May 26th
Lot of 22 Tapered &amp; Straight Drill bits. Mixed sizes, Some USA

Lot of 22 Tapered & Straight Drill bits. Mixed sizes, Some USA

  • Elk River, Minnesota, United States
  • May 27th
Lot of 9 Tapered Drill bits. 21/32-1 29/64, Mixed sizes, Some USA

Lot of 9 Tapered Drill bits. 21/32-1 29/64, Mixed sizes, Some USA

  • Elk River, Minnesota, United States
  • May 27th
CLEVELAND TWIST DRILL PACK OF 5: 3/8 COBALT HS CO SP PT DRILL BIT NEW IN PACKAGE

CLEVELAND TWIST DRILL PACK OF 5: 3/8 COBALT HS CO SP PT DRILL BIT NEW IN PACKAGE

  • Huntington Station, New York, United States
  • May 28th
Guhring 6.100 mm Drills - 2.755&#034; Long - FIREX Coated

Guhring 6.100 mm Drills - 2.755" Long - FIREX Coated

  • Cedarburg, Wisconsin, United States
  • May 28th
Guhring HSS Drills - 6,250mm (0.246&#034;) Dia - 3.965&#034; Length

Guhring HSS Drills - 6,250mm (0.246") Dia - 3.965" Length

  • Cedarburg, Wisconsin, United States
  • May 28th
Guhring HSS Drills - 4,40 mm (0.173&#034;) - 2.315&#034; Length

Guhring HSS Drills - 4,40 mm (0.173") - 2.315" Length

  • Cedarburg, Wisconsin, United States
  • May 28th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies