Char-lynn (eaton) 158-3006-001 Hydraulic Motor, Winch Motor

US $3600

  • Victoria, Texas, United States
  • May 29th
Char-Lynn (Eaton) 158-3006-001 Hydraulic motor This Char-Lynn 158-3006-001 motor was purchased new and has never been used. Mainly used for winch applications. Geometric Displacement (cu-iIn./rev): 6.20 Inlet And Outlet Ports Size: Manifold Ports 5/16"-18 UNC Thread Output Shaft Size: 7/8" SAE 13 Tooth Spline - SAE B Series: T Series Geroler Motor Type Of Mount: 2 Bolt - 3-1/4" Pilot Dia.- Standard ACTUAL CASE DRAIN: No Case Drain ACTUAL MOUNTING FLANGE: Standard, 2 Bolt: 82.6 .25 Dia. X 3.0 12 Pilot, 13.59 535 Dia. Holes On 106.2 .18 Dia. Bolt Circle ACTUAL OUTPUT SHAFT: 22.22 875 Dia. Sae 13 Tooth Spline (Sae B) ACTUAL PORT TYPE: Manifold (.3125-18 Unc-2B Thd.) Additional Detail: To Assure Best Motor Life, Run Motor For Approximately One Hour At 30 Percent Of Rated Pressure Before Application To Full Load. Be Sure Motor Is Filled With Fluid Prior To Any Load Applications. FLOW (GPM): Continuous: 15 gpm / Intermittent: 20 gpm MANUFACTURER'S ACTUAL DISPLACEMENT: 102 Cm3/R, 6.2 In3/R Operation Rating Description: Continuous Rating - Motor May Be Run Continuously At These Ratings. / Intermittent Operation - 10 Percent Of Every Minute / Peak Operation - 1 Percent Of Every Minute PRESSURE (PSI): Continuous: 2,250 psi / Intermittent 2,750 psi SPEED (RPM):                                    Continuous: 550 rpmTORQUE (LB-IN.):Continuous: 1,936                                                                 Lb-In. / Intermittent: 2,339 Lb-In.

Directions

Similar products from Hydraulic Engines

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies