US $1400
| Condition: |
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully
operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
...
|
Country/Region of Manufacture | Japan |
| Tool Type | Chassis screw type punching set |
Directions
Similar products from Other Workholding Tools
New Heimann Mfg. Co. 3/4" x 10 Transfer Screws Machinist Tool Set Lathe Mill
IRWIN 225101 100 Series 1-Inch C-Clamp
HHIP 3900-0001 58 Piece Clamping Kit 5/8 Inch T-Slot Stud Size 1/2-13
Bison-Bial 4" Tailstock for Indexing Fixtures, Rotary Table, H/V Super Spacers
IRWIN ToolsQUICK-GRIP100SeriesDeepThroatC-Clamp,2-inchby 31/2-inchThroat(225123)
50mm 2 inch Lathe Chuck 3 Jaw Fingertight Self Centering M14 Hardened Steel
Double Handed Carrying Clamp Glass Gripper Stone Ceramic Plate Lifter new
BTM 756800A-RSPTDC Used Finger Clamp Repaired GM No. 0174-8W9P
1745XC Vise 4.5"" Jaw Width 3.5"" Jaw Opening 3.25
Kurt Vise D60-23A (BF) Arm Handle 3/4" HEX
TSD (AF208) 59/64" Diameter 23.5mm ER Collet
Ridgid 40210 1/4 to 6 In Pipe Cap 4-1/2 In H Bench Chain Vise
BRAND NEW, no box, PHD INC PBL5L-1 ROTARY SWING CLAMP, 50mm BORE
BRAND NEW, no box, PHD INC PBL5L-1-ASB-SW51-AB1 ROTARY SWING CLAMP, 50mm BORE
Bessey 3100398 Sliding Arm Assembly 1200/1800 Spindle Handle MorPad Assembly
Lathe Guard for Swing 6" To 12" Heavy Duty Flexbar USA, Lexan
Lot Of 21 Hardinge S20-HGB RD SM Guide Bushing Swiss CNC Lathe Collets
LOT OF THREE (3) TSD 55165 TYPE ZZ DOUBLE TAPER COLLETS: ALL ARE 1/4"
8" LATHE CHUCK 4 jaw independent, Key, bolts, flat back NEW! MADE IN Japan!
(11) VARIOUS DESTACO CLAMPS, SOME BRAND NEW
People who viewed this item also vieved
Starrett 25-341J Dial Indicator, 0.375" Stem Dia., 0-50-0 Reading, 0-1" Range
No Name Right Angle Block - 4-1/4" Wide with 3-1/2" Leg and 4-5/8" Leg
Machinist Set-up V Block 6" x 4" x 3 1/8" Good condition. Unique
Jarno 14 Taper Lathe Dead Center Set Of 2
Jarno 14 Taper Bullnose Carbide Tip Lathe Dead Center
Jarno #16 Taper Carbide Tip Lathe Dead Center
JACOBS RUBBER FLEX SPINDLE NOSE CHUCK W/ COLLETS L00 MOUNT
machinist tool,5" 3 jaw scroll chuck 1-1/2"-8,will fit 9" south bend
STEELEX D3608 5" 3 JAW SCROLL CHUCK BRAND NEW IN BOX!
BTM 745100E-R-SC2-UP POWER CLAMP - USED - FREE SHIPPING!!!
NORGREN EC63D-A-1-0-0-R-45-10-0 POWER CLAMP - NNB - FREE SHIPPING!!!
BTM 745100G-R-SC2 POWER CLAMP - USED - FREE SHIPPING!!!
11 PIECE ER-32 COLLET SET(1/8~3/4 x16th) (3900-5168)
KM-TYPE ER40 COLLET CHUCK NUT(18000RPM) (3900-0697)
ER-32 5/8 INCH COOLANT THRU SPRING COLLET (3900-5553) - MADE IN TAIWAN
23 Pcs ER40 Collet Set 1/8'' to 1'', 0.0005'' in Fitted Strong Box, #0223-0935
1mm to 10 mm by 1 mm ER-16 Collet 10 Pcs/Set in Fitted Aluminium Box, #3350-0582
2mm to 16mm by 1mm ER-25 Collet 15 Pcs/Set in Fitted Strong Alu Box, #3350-0584
8" SLOTTED MOUNTING FACE PLATE FOR LATHE W/ 2-1/4"-8 THREADED MOUNT
6-1/2" LATHE DOG DRIVE MOUNTING FACE PLATE W/ 2-1/4"-8 THREADED MOUNT
7" LATHE DOG DRIVE MOUNTING FACE PLATE W/ 2-3/8"-5 THREADED MOUNT
SOUTH BEND ROTARY TABLE MODEL RTB101 USA 4 1/4" DIAMETER
3 Hartford 8" Super Spacer Master Plates 11 Notch, 8 Notch Duplex
HAAS HA5C INDEXER 4TH AXIS ROTARY TABLE 5C FADAL MAZAK CNC MILL LMSI *video*
Northern Industrial Benchtop Yoke Pipe Vise 3/8" - 3-1/2"
COLUMBIAN SWIVEL BENCH VISE #D45 M3 7 1/2" OPEN
WILTON Power Arm W/ KANT-TWIST Welding Clamp 3" Jaw Rare One Off Aerospace Tool
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
Accept All Cookies