chemical resistant tubing for sale, brand-new and used.

Never used, box opened to check contents. Box is a little worn, some dust on the pump. LMI Series J5 Metering Pump, 0.42 GPH @ 140 PSI, 12 Volt DC LMI Series J5 Metering Pump (12 VDC).

White Polyurethane Tubing 3/8" OD x 1/4" ID 1/16" Wall - 500' Length This SMC white, flexible polyurethane tubing for water or compressed air applications has a low compression set and low gas permeability. It is made of polyurethane for resistance to chemicals, oil, weather, and abrasion. This material is ether-based for its immunity to hydrolysis and resistance to fungus and microorganisms.

White Translucent FEP Tubing - 0.500" ID 0.563" OD 0.030" Wall - 100' Length This Zeus translucent white tubing is a flexible, non-stick tubing for the movement of viscous compounds. It is made of FEP (fluorinated ethylene propylene) for low friction and non-reactive properties and has a Shore D Hardness rating of 60 for resistance to abrasion and puncture. It meets United States Pharmocopeia (USP) Class VI standards for biocompatibility.

Cole Parmer Masterflex 7553-70 Drive Cole Parmer EW-07553-70 L/S ® Variable-Speed Modular Drive EW-07553-70 Masterflex ® L/S ® variable-speed modul

These are brand new in the box dosing/microprocessor pumps.These are fully submersible pumps designed for pumping all solutions,LMI recommends flooded suction installations for all high-viscosity fluid applications. The Liquipro trademark Model # is AA966-362TI with a serial number of 12063396865-3SF2145270.10.The Maximum LPH is 7.60 with a BAR of 3.5 & is a 250V.a.c. 50/60Hz 70A The units are new, in the box.

ROYTRONIC® Series A Chemical Metering Pumps are positive displacement, Liquifram™ pumps with an NEMA 4X/IP-65 enclosure. Relevant model codes are NSF, UL/CUL or CE certified and offer control options and improved electro-magnetics to meet all flow / pressure ratings. Designed for Commercial applications, the pumps are available for applications up to 250 psi with capacities between .001 and 2.0 GPH.

ROYTRONIC® Series A Chemical Metering Pumps are positive displacement, Liquifram™ pumps with an NEMA 4X/IP-65 enclosure. Relevant model codes are NSF, UL/CUL or CE certified and offer control options and improved electro-magnetics to meet all flow / pressure ratings. Designed for Commercial applications, the pumps are available for applications up to 250 psi with capacities between .001 and 2.0 GPH.

fisher_scientific_15-077-67_variable_flow_chemical_pump Policies

ROYTRONIC® Series A Chemical Metering Pumps are positive displacement, Liquifram™ pumps with an NEMA 4X/IP-65 enclosure. Relevant model codes are NSF, UL/CUL or CE certified and offer control options and improved electro-magnetics to meet all flow / pressure ratings. Designed for Commercial applications, the pumps are available for applications up to 250 psi with capacities between .001 and 2.0 GPH.

Perform vacuum aspiration of a variety of liquids, including tissue culture media, supernatants, and chemical wastes. To use, simply insert a pipette tip, Pasteur pipette, or serological pipette into the collection tube and plug in to a 110/120V outlet. Self-contained system with bottle, tubing and vacuum pump is lightweight, compact and easy to use.

This is a PULSAtron Series MP Model LMB2TA-PTC1-XXX, 5 GPD, .79 LPH, 250 PSI Metering Pump What you will get: PULSAtron Series MP Model LMB2TA-PTC1-XXX, 5 GPD, .79 LPH, 250 PSI Metering Pump Printout of the manual from the link below. Fittings and hose that is currently attached to the pump. This pump

This listing is for a VWR 54856-070, Variable Flow Pump, Flow Rate: 0.03 to 8.2 mL/min New in Box Flow What you will get: VWR 54856-070, Variable Flow Pump, Flow Rate: 0.03 to 8.2 mL/min New in Box Power Adapter Kit with silicone tubing (sizes 1/16", 3/32", 3/16", and 1/4" I.D.), polypropylene fittings/nipples, and an accessory b

This listing is for a VWR 61161-354 Variable Flow Pump, 0.005 to 0.9 mL/min Flow Rate, Ultra Low Flow What you will get: VWR 61161-354 Variable Flow Pump, 0.005 to 0.9 mL/min Flow Rate, Ultra Low Flow Power Adapter What is not supplied is silicone tubing (sizes 1/16", 3/32", 3/16", and 1/4" I.D.), polypropylene fittings

The Lotoons Store NEW Brady PS-2231-1000-WT LS2000 2" Width x 1.66" Height B-342 Heat-Shrink Polyolefin Matte Finish White PermaSleeve Wire Marker Sleeves (100 per Roll)

New surplus 3/8" OD nylon tubing for pneumatic applications 100 ft length .ID. .190Wall thickness. .093500psi @ 73 deg F.2000 psi Burst Pressure.3/4" Minimum bend radius.Chemical resistant.Abrasion resistant.Natural color.

Black Viton Soft Tubing, 1/2" ID, 3/4" OD, 1/8" Wall, 25' Length Made of 100 percent pure Type B Viton, a high performance synthetic rubber. Specifically deisgned for use with peristaltic pumps, this tubing has excellent temperature resistance with an operating range of -40 F to 400 F continuously; 600 F periodically.

Modular drives let you place motor and controller where convenient—ideal for limited or awkward spaces Flow rate: 0.06 to 580 mL/min depending on tubing size and drive rpm; achieve lower flow rates with cartridge or multichannel pump heads and microbore tubing. 6-ft (1.8-m) cable connects motor and controller—place motor and controller where convenient. Reversible motor lets you purge tubing before or after pumping, or pump in either direction.

MSA ALTAIR® 5X Pumped Multigas Detector with MSA XCell™ Sensor Technology MSA Part Number: 10116926 Former Sales Demo unit - gently handled

This is a nice, used Tuskin TC-110-300 Peristaltic Pump, part # P1021. This pump spins at 300rpms. With 3/16" tubing, it will move 650ml/min or 21.98oz/min.

This is a listing for a Masterflex Easy-Load I/P 77601-60 Pump Head W 56C Motor Adapter, 6K233D Motor, Very dirty, but functional. Came out of a solar panel manufacturing plant What you will get: 1 Masterflex Easy-Load I/P 77601-60 Pump Head (Masterflex I/P Easy-Load pump head, PPS housing/SS rotor) 1 56C Motor Adapter (17.8 to 1 Speed Reduction) 1 Dayton 6K233D Magnetic Disk Brake (Sells on Granger for $303.25)