+ Post new Ad
CHICAGO MORGAN VISE 145, SWIVEL, 4 1/2" JAWS, 68 LBS, CLEAN!!, US $169.95 – Picture 0
CHICAGO MORGAN VISE 145, SWIVEL, 4 1/2" JAWS, 68 LBS, CLEAN!!, US $169.95 – Picture 0

Chicago Morgan Vise 145, Swivel, 4 1/2" Jaws, 68 Lbs, Clean!!

US $169.95

  • Arlington Heights, Illinois, United States
  • Jun 9th
Open on mobile:
QR code
CHICAGO MORGAN VISE 145, SWIVEL, 4 1/2" JAWS, 68 LBS, CLEAN!! I have 2 Chicago Morgans, one is a 140 and my main go to vise is a Morgan 45 stationary on a stand. These old Morgans aren't talked up allot but they stand, in quality, among the major Vise MFG's in the last Century. My two, ,no doubt will outlast me and maybe even its next owner. This one is a 145 and its ready for your bench. It came in with 90% of its paint gone. It was taken from a home. No previous rust anywhere, I freshened it up with a cleanup and a Satin Black paint job. I took the jaws completely off so there won't be any surprises should you want to change for a new pair in the future.  The tops of the jaws and towers were also made more presentable. Operation is nice and smooth, it swivels easily, and the jaws, align up nicely as you can see. The handle is as straight as a arrow also with light wear. There are no cracks, welds or pieces missing. The top slide shows normal wear. The jaws. which are worn, and can be bought at Milwaukee Tool, which still carries replacement parts for this vise. Guys take advantage of a vise, USA made, in good condition, with replaceable jaws, fully functional. no surprises and reasonably priced. The Specs on this vise are impressive also. Shipping will be Fed Ex, no P.O.Boxes. Thanks for looking. SPECS: LENGTH, 18" HEIGHT, 10" OPENS, 7", THROAT, 3 1/2", JAWS, 4 1/2W X 1 1/4H, WEIGHT 67 LBS  

Directions

Similar products from Grips & Tongs

Chas Parker Vise No. 202 Replacement Part MAIN NUT Lead Screw Nut

Chas Parker Vise No. 202 Replacement Part MAIN NUT Lead Screw Nut

  • Maple Shade, New Jersey, United States
  • Jun 9th
MACHINIST TOOLS LATHE MILL Adjustable Angle 2 1/2" Mill Drill Grinding Vise w

MACHINIST TOOLS LATHE MILL Adjustable Angle 2 1/2" Mill Drill Grinding Vise w

  • Morris Plains, New Jersey, United States
  • Jun 9th
USA MADE 2 " PNEUMATIC VISE W/ FOOT PEDAL

USA MADE 2 " PNEUMATIC VISE W/ FOOT PEDAL

  • El Monte, California, United States
  • Jun 9th
B & S HS 5/8" x 4 5/8" Long 2 Fulte End Mill 218C20

B & S HS 5/8" x 4 5/8" Long 2 Fulte End Mill 218C20

  • Sacramento, California, United States
  • Jun 9th
Bora Drill Press Vise Bora 551027

Bora Drill Press Vise Bora 551027

  • Palmdale, California, United States
  • Jun 9th
B & S HSS 1/8" x 3 1/8" Long Corner Rounding End Mill

B & S HSS 1/8" x 3 1/8" Long Corner Rounding End Mill

  • Sacramento, California, United States
  • Jun 9th
Reed Model: R3 Yoke Style Pipe Vise, 1/8" to 4-1/2" Capacity

Reed Model: R3 Yoke Style Pipe Vise, 1/8" to 4-1/2" Capacity

  • Brush Prairie, Washington, United States
  • Jun 9th
Vintage Wilton Bullet Bench Vise 4" Jaws Swivel Base Machinist Mechanic NICE!!!!

Vintage Wilton Bullet Bench Vise 4" Jaws Swivel Base Machinist Mechanic NICE!!!!

  • Honeoye Falls, New York, United States
  • Jun 9th
Rare ATLAS Shaper Milling machine VISE USED M1-301 Machinist

Rare ATLAS Shaper Milling machine VISE USED M1-301 Machinist

  • Jonesville, South Carolina, United States
  • Jun 9th
JAPAN! YUASA HEAVY DUTY 6" MILLING MACHINE VISE - #550-603

JAPAN! YUASA HEAVY DUTY 6" MILLING MACHINE VISE - #550-603

  • Covina, California, United States
  • Jun 9th
- J. H. Williams Vulcan No. 2 Pipe Vise 7218-33

- J. H. Williams Vulcan No. 2 Pipe Vise 7218-33

  • Hillsdale, New Jersey, United States
  • Jun 9th
Jewel # 1A straight chain pipe vise welding clamp aluminum 1/2" to 8" capacity

Jewel # 1A straight chain pipe vise welding clamp aluminum 1/2" to 8" capacity

  • Grand Rapids, Michigan, United States
  • Jun 9th
Stephens Engineering Low Profile Cnc Vise

Stephens Engineering Low Profile Cnc Vise

  • Valencia, California, United States
  • Jun 9th
Kurt D688 Machine Vise 6" Wide 8.8" Opening CNC Workholding Anglock Iron-Clad

Kurt D688 Machine Vise 6" Wide 8.8" Opening CNC Workholding Anglock Iron-Clad

  • Huntington Beach, California, United States
  • Jun 9th
WILTON SWIVEL BENCH VISE MODEL 845 5" JAWS 32LBS

WILTON SWIVEL BENCH VISE MODEL 845 5" JAWS 32LBS

  • Orland Park, Illinois, United States
  • Jun 9th
Machinist Clamp Block Set Up Tool Machining Milling Great Condition Blued Vise

Machinist Clamp Block Set Up Tool Machining Milling Great Condition Blued Vise

  • Warsaw, Indiana, United States
  • Jun 9th
ToolMakers Vise with older drill press vise. Both in Average Condition.

ToolMakers Vise with older drill press vise. Both in Average Condition.

  • Branford, Connecticut, United States
  • Jun 9th
Machinist Clamp Block Set Up Tools Machining Milling Great Condition Blued Vise

Machinist Clamp Block Set Up Tools Machining Milling Great Condition Blued Vise

  • Warsaw, Indiana, United States
  • Jun 9th
Antique Post Vise Iron 3-1/2" JAWS 40"L 34 lb Farm Tool BLACKSMITH VISE Railroad

Antique Post Vise Iron 3-1/2" JAWS 40"L 34 lb Farm Tool BLACKSMITH VISE Railroad

  • Yreka, California, United States
  • Jun 9th
7"x5" Adjustable Angle Plate, heavy duty, 45 degree both sides

7"x5" Adjustable Angle Plate, heavy duty, 45 degree both sides

  • Spring Valley, California, United States
  • Jun 9th

People who viewed this item also vieved

MITUTOYO 181-146 MAGNETIC BRAZIL V BLOCK

MITUTOYO 181-146 MAGNETIC BRAZIL V BLOCK

  • Hutchinson, Kansas, United States
  • Jan 30th
V block mill

V block mill

  • Escondido, California, United States
  • Jan 30th
MACHINIST LATHE MILL Lot of Small Machinist Items Cutters Parts Etc

MACHINIST LATHE MILL Lot of Small Machinist Items Cutters Parts Etc

  • Morris Plains, New Jersey, United States
  • Jan 30th
BISON Ultra Precision Adjustable Heavy Duty Live Center Point Length : 2.44"

BISON Ultra Precision Adjustable Heavy Duty Live Center Point Length : 2.44"

  • Flushing, New York, United States
  • Jan 30th
TTC Revolving Tailstock Turret Tapping Collet for 5" Turret

TTC Revolving Tailstock Turret Tapping Collet for 5" Turret

  • Flushing, New York, United States
  • Jan 30th
BISON Ultra Precision Adjustable Heavy Duty Live Center Point Length : 2.01"

BISON Ultra Precision Adjustable Heavy Duty Live Center Point Length : 2.01"

  • Flushing, New York, United States
  • Jan 30th
KITAGAWA 15" 3 JAW LATHE HYDRAULIC POWER CHUCK B-215

KITAGAWA 15" 3 JAW LATHE HYDRAULIC POWER CHUCK B-215

  • Chino, California, United States
  • Jan 30th
ASI 110mm 4-7/16" 3 JAW FINGER LATHE HYDRAULIC POWER CHUCK ASI-11900

ASI 110mm 4-7/16" 3 JAW FINGER LATHE HYDRAULIC POWER CHUCK ASI-11900

  • Chino, California, United States
  • Jan 30th
10" 4 Jaw Lathe Chuck 2 1/2" Diameter through hole

10" 4 Jaw Lathe Chuck 2 1/2" Diameter through hole

  • Saint Peters, Missouri, United States
  • Jan 30th
MITUTOYO Offset Dial Caliper "SHOCK PROOF" 8" Range .001" Graduations

MITUTOYO Offset Dial Caliper "SHOCK PROOF" 8" Range .001" Graduations

  • Toledo, Ohio, United States
  • Jan 30th
1 Pair of Brown & Sharp Machinists V-Blocks and Clamps # 713

1 Pair of Brown & Sharp Machinists V-Blocks and Clamps # 713

  • Brookings, Oregon, United States
  • Jan 30th
Machinists 12/26FP BUY NOW USA Toolmakers Parallel Clamp C -Strarrett 161 D

Machinists 12/26FP BUY NOW USA Toolmakers Parallel Clamp C -Strarrett 161 D

  • Lutz, Florida, United States
  • Jan 30th
UM-TYPE ER16 COLLET CHUCK NUT(18000RPM) (3900-0688)

UM-TYPE ER16 COLLET CHUCK NUT(18000RPM) (3900-0688)

  • Chino, California, United States
  • Jan 30th
Young Bros Stamp Works 1/2 inch Steel Set 9 Figure Number Character MADE IN USA

Young Bros Stamp Works 1/2 inch Steel Set 9 Figure Number Character MADE IN USA

  • Columbus, Ohio, United States
  • Jan 30th
C8 ER11A 100L Straight Shank Chuck Deep Processing for CNC Mill White Pack Bag

C8 ER11A 100L Straight Shank Chuck Deep Processing for CNC Mill White Pack Bag

  • shenzhen, China
  • Jan 30th
ER11 SPRING COLLET SET 12 PCS IN INCH SIZES CNC MILLING LATHE TOOL HOLDING#F58

ER11 SPRING COLLET SET 12 PCS IN INCH SIZES CNC MILLING LATHE TOOL HOLDING#F58

  • Hong Kong, Hong Kong
  • Jan 30th
METRIC MORSE TAPER 3 MT3 MILLING COLLETS (15 PCS) CNC MILLING LATHE #F79

METRIC MORSE TAPER 3 MT3 MILLING COLLETS (15 PCS) CNC MILLING LATHE #F79

  • Hong Kong, Hong Kong
  • Jan 30th
FULL ER11 SPRING COLLET SET (13 PCS) CNC MILLING LATHE TOOL & WORKHOLDING #A02

FULL ER11 SPRING COLLET SET (13 PCS) CNC MILLING LATHE TOOL & WORKHOLDING #A02

  • Hong Kong, Hong Kong
  • Jan 30th
59" x 19" x 8" Steel Welding T-Slotted Table T-Slot Cast iron Layout

59" x 19" x 8" Steel Welding T-Slotted Table T-Slot Cast iron Layout

  • Grand Rapids, Michigan, United States
  • Jan 30th
46" x 17" x 7" Steel Welding T-Slotted Table w/ Coolant Trough Cast iron

46" x 17" x 7" Steel Welding T-Slotted Table w/ Coolant Trough Cast iron

  • Grand Rapids, Michigan, United States
  • Jan 30th
35.5" x 16" x3" Steel Welding T-Slotted Table Cast iron Layout Plate T-Slot Weld

35.5" x 16" x3" Steel Welding T-Slotted Table Cast iron Layout Plate T-Slot Weld

  • Grand Rapids, Michigan, United States
  • Jan 30th
Martin 60BTL12H Taper Lock Sprocket 1 3/8" to 1 1/4" Bore - NEW

Martin 60BTL12H Taper Lock Sprocket 1 3/8" to 1 1/4" Bore - NEW

  • Bay City, Michigan, United States
  • Jan 30th
MACHINIST TOOLS LATHE MILL Lot of Machinist Drill Bushings m

MACHINIST TOOLS LATHE MILL Lot of Machinist Drill Bushings m

  • Morris Plains, New Jersey, United States
  • Jan 30th
10-1/2 Inch Universal Dividing Head Set

10-1/2 Inch Universal Dividing Head Set

  • Chino, California, United States
  • Jan 30th
GREAT! YUASA 8" VERTICAL HORIZONTAL INDEXING SUPER SPACER # 550-007

GREAT! YUASA 8" VERTICAL HORIZONTAL INDEXING SUPER SPACER # 550-007

  • Chino, California, United States
  • Jan 30th
SMW RT-325VN CNC 4th Axis Rotary 325 mm Servo Rotary Table

SMW RT-325VN CNC 4th Axis Rotary 325 mm Servo Rotary Table

  • Pilot Rock, Oregon, United States
  • Jan 30th
CHICK YUASA ROTARY INDEXER AND CONTROL

CHICK YUASA ROTARY INDEXER AND CONTROL

  • Erie, Pennsylvania, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies