+ Post new Ad
Chicago Pneumatic 3/8" Square Drive Ratchet Wrench RP9429, US $820 – Picture 0
Chicago Pneumatic 3/8" Square Drive Ratchet Wrench RP9429, US $820 – Picture 0

Chicago Pneumatic 3/8" Square Drive Ratchet Wrench Rp9429

US $820

  • Detroit, Michigan, United States
  • Jan 30th
Open on mobile:
QR code
Visit My eBay Store: eairtool_1 Brand New Pneumatic Ratchet Wrench by Chicago Pneumatic Drive Size: 3/8 in Drive Type: Square Torque: 10.00 ft lb [Min], 50.00 ft lb [Max] Free Speed: 150 rpm [Max] Air Consumption: 16 CFM [Max] Noise Level: 97.0 dB Vibration: 7.9 m/s2 Inlet Size: 1/4 in NPT(F) Length: 10 in Wt.: 2.63 lb Visit My eBay Store: eairtool_1
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Manufacturer Chicago Pneumatic
Model RP9429
Brand Chicago Pneumatic
MPN RP9429

Directions

Similar products from Lathe Chucks

ER25 BT30 SPRING COLLET HOLDER CHUCK CNC MILLING LATHE TOOL & WORKHOLDING #B50

ER25 BT30 SPRING COLLET HOLDER CHUCK CNC MILLING LATHE TOOL & WORKHOLDING #B50

  • Hong Kong, Hong Kong
  • Jan 30th
ER11 SPRING COLLET NUT WRENCH (A) CNC MILLING LATHE TOOL & WORKHOLDING #F85

ER11 SPRING COLLET NUT WRENCH (A) CNC MILLING LATHE TOOL & WORKHOLDING #F85

  • Hong Kong, Hong Kong
  • Jan 30th
ER20 3/4" STRAIGHT SHANK (L4") CHUCK CNC MILLING LATHE TOOL & WORKHOLDING #L30

ER20 3/4" STRAIGHT SHANK (L4") CHUCK CNC MILLING LATHE TOOL & WORKHOLDING #L30

  • Hong Kong, Hong Kong
  • Jan 30th
ER20 10MM STRAIGHT SHANK (L50MM) CHUCK CNC MILLING LATHE TOOL & WORKHOLDING #L32

ER20 10MM STRAIGHT SHANK (L50MM) CHUCK CNC MILLING LATHE TOOL & WORKHOLDING #L32

  • Hong Kong, Hong Kong
  • Jan 30th
ER20 MT2 MK2 M10 SPRING COLLET CHUCK CNC MILLING LATHE TOOL & WORKHOLDING #A22

ER20 MT2 MK2 M10 SPRING COLLET CHUCK CNC MILLING LATHE TOOL & WORKHOLDING #A22

  • Hong Kong, Hong Kong
  • Jan 30th
ER32 3/4" STRAIGHT SHANK SPRING COLLET CHUCK CNC MILLING LATHE TOOL HOLDING #D20

ER32 3/4" STRAIGHT SHANK SPRING COLLET CHUCK CNC MILLING LATHE TOOL HOLDING #D20

  • Hong Kong, Hong Kong
  • Jan 30th
ER32 1-1/4" STRAIGHT SHANK COLLET CHUCK CNC MILLING LATHE TOOL & WORKHOLDING G08

ER32 1-1/4" STRAIGHT SHANK COLLET CHUCK CNC MILLING LATHE TOOL & WORKHOLDING G08

  • Hong Kong, Hong Kong
  • Jan 30th
ER40 R8 7/16" SPRING COLLET CHUCK BRIDGEPORT MILLING CNC TOOL HOLDING - NEW #C71

ER40 R8 7/16" SPRING COLLET CHUCK BRIDGEPORT MILLING CNC TOOL HOLDING - NEW #C71

  • Hong Kong, Hong Kong
  • Jan 30th
ER11 3/4" STRAIGHT SHANK CHUCK CNC MILLING LATHE TOOL & WORKHOLDING NEW #C44

ER11 3/4" STRAIGHT SHANK CHUCK CNC MILLING LATHE TOOL & WORKHOLDING NEW #C44

  • Hong Kong, Hong Kong
  • Jan 30th
ER20 10MM STRAIGHT SHANK (L100MM) CHUCK CNC MILLING LATHE TOOL & WORKHOLDING L34

ER20 10MM STRAIGHT SHANK (L100MM) CHUCK CNC MILLING LATHE TOOL & WORKHOLDING L34

  • Hong Kong, Hong Kong
  • Jan 30th
PHASE II 3 Jaw Direct Mounting Series Chuck - CHUCK SIZE: 6"

PHASE II 3 Jaw Direct Mounting Series Chuck - CHUCK SIZE: 6"

  • Tucson, Arizona, United States
  • Jan 30th
Vintage Almond Co Machinist Drill Chuck 40-62

Vintage Almond Co Machinist Drill Chuck 40-62

  • Elmhurst, Illinois, United States
  • Jan 30th
MicroCentric CB80-ND Collet Chuck, with S30 Collet and Installation Tool.

MicroCentric CB80-ND Collet Chuck, with S30 Collet and Installation Tool.

  • Bessemer City, North Carolina, United States
  • Jan 30th
MicroCentric CB3J-D Collet Chuck.

MicroCentric CB3J-D Collet Chuck.

  • Bessemer City, North Carolina, United States
  • Jan 30th
ER16 BT40 SPRING COLLET HOLDER CHUCK CNC MILLING LATHE TOOL & WORKHOLDING #B80

ER16 BT40 SPRING COLLET HOLDER CHUCK CNC MILLING LATHE TOOL & WORKHOLDING #B80

  • Hong Kong, Hong Kong
  • Jan 30th
ER11 20MM 150MM LONG SHANK COLLET CHUCK CNC MILLING LATHE TOOL & WORKHOLDING F66

ER11 20MM 150MM LONG SHANK COLLET CHUCK CNC MILLING LATHE TOOL & WORKHOLDING F66

  • Hong Kong, Hong Kong
  • Jan 30th
ER25 3/4" STRAIGHT SHANK SPRING COLLET CHUCK CNC MILLING TOOL & WORKHOLDING #C70

ER25 3/4" STRAIGHT SHANK SPRING COLLET CHUCK CNC MILLING TOOL & WORKHOLDING #C70

  • Hong Kong, Hong Kong
  • Jan 30th
ER20 MT3 MK3 M12 SPRING COLLET CHUCK CNC MILLING LATHE TOOL & WORKHOLDING #A23

ER20 MT3 MK3 M12 SPRING COLLET CHUCK CNC MILLING LATHE TOOL & WORKHOLDING #A23

  • Hong Kong, Hong Kong
  • Jan 30th
ER25 R8 7/16" SPRING COLLET CHUCK BRIDGEPORT MILLING CNC #A73

ER25 R8 7/16" SPRING COLLET CHUCK BRIDGEPORT MILLING CNC #A73

  • Hong Kong, Hong Kong
  • Jan 30th
ER25 MT3 MK3 3/8" SPRING COLLET CHUCK CNC MILLING LATHE TOOL & WORKHOLDING #A70

ER25 MT3 MK3 3/8" SPRING COLLET CHUCK CNC MILLING LATHE TOOL & WORKHOLDING #A70

  • Hong Kong, Hong Kong
  • Jan 30th

People who viewed this item also vieved

MAGNETIC TRANSFER V-BLOCK machinist tools alluminum and steel

MAGNETIC TRANSFER V-BLOCK machinist tools alluminum and steel

  • Hadley, Pennsylvania, United States
  • May 28th
MACHINIST TOOL LATHE MILL ToolMakers Ground Angle Plate Fixture 1.25x1.25x2.25

MACHINIST TOOL LATHE MILL ToolMakers Ground Angle Plate Fixture 1.25x1.25x2.25

  • Hadley, Pennsylvania, United States
  • May 28th
Toolmaker Angle Plate 4 x 4 x 3 x 1.25

Toolmaker Angle Plate 4 x 4 x 3 x 1.25

  • Monroe, New York, United States
  • May 28th
MACHINIST TOOLS * R8 COLLETS * KENT * 1 LOT (5)

MACHINIST TOOLS * R8 COLLETS * KENT * 1 LOT (5)

  • Camarillo, California, United States
  • May 29th
MACHINIST TOOLS * R8 COLLETS * HARDINGE * 1 LOT (8)

MACHINIST TOOLS * R8 COLLETS * HARDINGE * 1 LOT (8)

  • Camarillo, California, United States
  • May 29th
1" # 5C Collet

1" # 5C Collet

  • Coventry, Rhode Island, United States
  • May 29th
USED LATHE DEAD CENTER MT2 SHANK x 1.875" POINT DIAMETER

USED LATHE DEAD CENTER MT2 SHANK x 1.875" POINT DIAMETER

  • Fairfield, Iowa, United States
  • May 31st
HEAVILY USED #4MT MORSE TAPER LATHE DEAD CENTER (Point Diameter 1.246")

HEAVILY USED #4MT MORSE TAPER LATHE DEAD CENTER (Point Diameter 1.246")

  • Fairfield, Iowa, United States
  • May 31st
USED LATHE DEAD CENTER #8 JARNO (1.038" Point Diameter)

USED LATHE DEAD CENTER #8 JARNO (1.038" Point Diameter)

  • Fairfield, Iowa, United States
  • May 31st
DE-STA-CO 484 Toggle Clamp, Squeeze Action, Wide Jaw (2 Clamps)

DE-STA-CO 484 Toggle Clamp, Squeeze Action, Wide Jaw (2 Clamps)

  • Greenwood, Indiana, United States
  • May 31st
DE-STA-CO Strait Line Toggle Clamp 624 ** New !!! **

DE-STA-CO Strait Line Toggle Clamp 624 ** New !!! **

  • Binghamton, New York, United States
  • May 31st
C Clamp, (1) SARGENT & CO. 5" , Made in USA

C Clamp, (1) SARGENT & CO. 5" , Made in USA

  • Surprise, Arizona, United States
  • May 31st
Enco Model #42023 Drill Press Vise

Enco Model #42023 Drill Press Vise

  • Wethersfield, Connecticut, United States
  • Jun 1st
2 Piece Set Vintage Small Toolmakers Parallel Clamps Machinist Tools

2 Piece Set Vintage Small Toolmakers Parallel Clamps Machinist Tools

  • Broomfield, Colorado, United States
  • Jun 1st
# 3 CLAMP ON PIPE VISE HINGED TYPE PLUMBING TOOLS

# 3 CLAMP ON PIPE VISE HINGED TYPE PLUMBING TOOLS

  • Long Beach, California, United States
  • Jun 1st
6 MACHINIST PARALLELS INSPECTION BLOCKS I BEAM PRECISION TOOL DIE METAL WORKING

6 MACHINIST PARALLELS INSPECTION BLOCKS I BEAM PRECISION TOOL DIE METAL WORKING

  • Grayling, Michigan, United States
  • Jun 9th
Hardened and ground Vee block set

Hardened and ground Vee block set

  • Rathdrum, Idaho, United States
  • Jun 9th
Starrett 278 V- Blocks Set & Clamps Nice

Starrett 278 V- Blocks Set & Clamps Nice

  • Santa Ana, California, United States
  • Jun 9th
Dumont Keyway Broach Bushing 1 9/16” Dia. x 3/8” Wide Slot x 2 1/2 ” Long

Dumont Keyway Broach Bushing 1 9/16” Dia. x 3/8” Wide Slot x 2 1/2 ” Long

  • Lake Saint Louis, Missouri, United States
  • Jun 9th
Dumont Keyway Broach Bushing 1 1/2 ” Dia. x 3/8” Wide Slot x 2 1/2 ” Long

Dumont Keyway Broach Bushing 1 1/2 ” Dia. x 3/8” Wide Slot x 2 1/2 ” Long

  • Lake Saint Louis, Missouri, United States
  • Jun 9th
Dumont Keyway Broach Bushing 1 7/16” Dia. x 3/8” Wide Slot x 2 1/2 ” Long

Dumont Keyway Broach Bushing 1 7/16” Dia. x 3/8” Wide Slot x 2 1/2 ” Long

  • Lake Saint Louis, Missouri, United States
  • Jun 9th
7" x 7" Cross Slide Rotary Table

7" x 7" Cross Slide Rotary Table

  • DeKalb, Illinois, United States
  • Jun 9th
Haas Ha5C Brush Style 5C Collet Rotary Table Indexer 4th axis & servo control bo

Haas Ha5C Brush Style 5C Collet Rotary Table Indexer 4th axis & servo control bo

  • Schaumburg, Illinois, United States
  • Jun 9th
Used Haas Ha5C Brush Style 5C Collet Rotary Table Indexer Red 4th axis & control

Used Haas Ha5C Brush Style 5C Collet Rotary Table Indexer Red 4th axis & control

  • Schaumburg, Illinois, United States
  • Jun 9th
GoDog Dinos Bruto With Chew Guard Large-Purple

GoDog Dinos Bruto With Chew Guard Large-Purple

  • Hickory Hills, Illinois, United States
  • Jun 17th
"Cubics Platina Fixed Circular Needles 24""-Size 11/8mm"

"Cubics Platina Fixed Circular Needles 24""-Size 11/8mm"

  • Hickory Hills, Illinois, United States
  • Jun 17th
Magni-Clips Magnifiers-+1.00 Magnification

Magni-Clips Magnifiers-+1.00 Magnification

  • Hickory Hills, Illinois, United States
  • Jun 17th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies