+ Post new Ad
Chicago Pneumatic Air Clamping Vibration Vise / Clamp, US $72 – Picture 0
Chicago Pneumatic Air Clamping Vibration Vise / Clamp, US $72 – Picture 0

Chicago Pneumatic Air Clamping Vibration Vise / Clamp

US $72

  • Bothell, Washington, United States
  • Jun 9th
Open on mobile:
QR code
You are looking at a Chicago Pneumatic Air Clamping Vibration Vise/ Clamp.  I do not know what it is used for/on. I tested it and it works. Operating handle has three positions. When the handle is in the photo 10 position, the vise is open. When it is in the photo 11 position, the vise is closed. When the handle is in the photo 12 position, the vise is closed and the vibration motor is working. When the knob is in the photo 13 position, you can change the frequency of the vibration. The distance between the jaws when the vise is open is 6 1/4", and 2 3/4" when the vise is closed. The weight of this entire item is a little over 34 lbs. If anyone can tell me what this is used for, please let me know and I will include it in the description. I made 13 photos (click on the photos to enlarge). Please view the photos below carefully, to see the condition of what is being sold.  PLEASE CHECK OUT MY OTHER AUCTIONS, WHERE I AM SELLING OTHER MACHINIST / SHOP STUFF:  My other items Please scroll down to bottom of the listing, there might be answers to questions I get asked about this item. Combined shipping is available; every next item you buy is half price shipping. If shipping all together will be even cheaper, then I will return the difference to your account. Buyer will pay the reasonable price. Local pick up is also available. Thank you for looking.

Directions

Similar products from Clips & Jaws

NICE DE.STA.CO HEAVY DUTY TOGGLE CLAMP

NICE DE.STA.CO HEAVY DUTY TOGGLE CLAMP

  • Ellington, New York, United States
  • Jun 9th
WILTON DEEP C CLAMP NO 546 2 1/2" x 6 1/4" WELDING TOOL

WILTON DEEP C CLAMP NO 546 2 1/2" x 6 1/4" WELDING TOOL

  • Citrus Heights, California, United States
  • Jun 9th
ASSORTED LOT OF 8 DE-STA.CO. TOGGLE CLAMPS

ASSORTED LOT OF 8 DE-STA.CO. TOGGLE CLAMPS

  • Ellington, New York, United States
  • Jun 9th
PAIR OF NICE DE.STA.CO HEAVY DUTY TOGGLE CLAMPS

PAIR OF NICE DE.STA.CO HEAVY DUTY TOGGLE CLAMPS

  • Ellington, New York, United States
  • Jun 9th
Jergens Forged Strap Clamp, 6" Tapped Heel Length 7/8" Height, Lot Of 2

Jergens Forged Strap Clamp, 6" Tapped Heel Length 7/8" Height, Lot Of 2

  • Independence, Missouri, United States
  • Jun 9th
CARVER EDGE CRIP CLAMP SET T500

CARVER EDGE CRIP CLAMP SET T500

  • harrington park new south wales, Australia
  • Jun 9th
Vintage J.H. Williams Vulcan No.2 Heavy Service Clamp Excellent Cond. *

Vintage J.H. Williams Vulcan No.2 Heavy Service Clamp Excellent Cond. *

  • Airway Heights, Washington, United States
  • Jun 9th
VINTAGE BILLINGS HEAVY SERVICE C CLAMP No 3 AZ-114

VINTAGE BILLINGS HEAVY SERVICE C CLAMP No 3 AZ-114

  • Airway Heights, Washington, United States
  • Jun 9th
Vintage J.H. Williams Vulcan No.2 Heavy Service Clamp Excellent Cond. !

Vintage J.H. Williams Vulcan No.2 Heavy Service Clamp Excellent Cond. !

  • Airway Heights, Washington, United States
  • Jun 9th
Vintage heavy duty service C clamp

Vintage heavy duty service C clamp

  • Airway Heights, Washington, United States
  • Jun 9th
Vintage Pair Of Starrett 161A Parallel Clamps U.S.A.

Vintage Pair Of Starrett 161A Parallel Clamps U.S.A.

  • Fowler, Ohio, United States
  • Jun 9th
Acco Solid Brass Paper Fasteners, Golden Color, 1", 100/Box, 2 Boxes

Acco Solid Brass Paper Fasteners, Golden Color, 1", 100/Box, 2 Boxes

  • Hickory Hills, Illinois, United States
  • Jun 9th
Manchester 3539826 3/16W RH 2-1/4 BAR CLAMP

Manchester 3539826 3/16W RH 2-1/4 BAR CLAMP

  • Venice, Florida, United States
  • Jun 9th
Westward 3KB95 Spring Clamp, 1" In Jaw Opening, No-Slip100 Count

Westward 3KB95 Spring Clamp, 1" In Jaw Opening, No-Slip100 Count

  • Belding, Michigan, United States
  • Jun 9th
ANTIQUE SHEET METAL BENDING CLAMP

ANTIQUE SHEET METAL BENDING CLAMP

  • Alexandria, Pennsylvania, United States
  • Jun 9th
BALDOR 7307 7" bench grinder [very powerful]

BALDOR 7307 7" bench grinder [very powerful]

  • Jericho, New York, United States
  • Jun 9th
Kant Twist Clamps Lot of 12 NEW USA Made T-Handle 2 X 401 405 407 410 415 420

Kant Twist Clamps Lot of 12 NEW USA Made T-Handle 2 X 401 405 407 410 415 420

  • Fort Smith, Arkansas, United States
  • Jun 9th
100 pcs uc3842an dip-8 uc3842 tl3482 ka3842 3842 pwm controller ic #2931149

100 pcs uc3842an dip-8 uc3842 tl3482 ka3842 3842 pwm controller ic #2931149

  • Shanghai, China
  • Jun 9th
20pcs cd4510 cd4510be cmos presettable up/down counters dip new #3188348

20pcs cd4510 cd4510be cmos presettable up/down counters dip new #3188348

  • Shanghai, China
  • Jun 9th
MODEL NO 603 DESTACO STRAIGHT-LINE ACTION TOGGLE CLAMP 600 LBS. CAPACITY

MODEL NO 603 DESTACO STRAIGHT-LINE ACTION TOGGLE CLAMP 600 LBS. CAPACITY

  • San Jose, California, United States
  • Jun 9th

People who viewed this item also vieved

Machinist Parallels & Set Up Miscellaneous Steel Pieces 10 pounds Flat Rate Ship

Machinist Parallels & Set Up Miscellaneous Steel Pieces 10 pounds Flat Rate Ship

  • Janesville, Wisconsin, United States
  • Jan 30th
Matched Set of (4) 1-2-3, 1 2 3, Blocks, 1" x 2" x 3", Clean, Tapped, Nice

Matched Set of (4) 1-2-3, 1 2 3, Blocks, 1" x 2" x 3", Clean, Tapped, Nice

  • Saint Clair, Michigan, United States
  • Jan 30th
“V” Blocks Matched Pair Hardened Ground & Polished Finish G.C.

“V” Blocks Matched Pair Hardened Ground & Polished Finish G.C.

  • Rome, New York, United States
  • Jan 30th
PTD HS DEAD CENTER 45 TAPER SHANK 9" OAL 2.7500 (LOC1227B) TS12

PTD HS DEAD CENTER 45 TAPER SHANK 9" OAL 2.7500 (LOC1227B) TS12

  • Laingsburg, Michigan, United States
  • Jan 30th
USED CARBIDE TIPPED LATHE DEAD CENTER #10 JARNO (.460" Point Diameter)

USED CARBIDE TIPPED LATHE DEAD CENTER #10 JARNO (.460" Point Diameter)

  • Fairfield, Iowa, United States
  • Jan 30th
RITEN 1.75" CARBIE TIPPED DEAD CENTER MORSE TAPER #4 090503 (LOC1227B) TS12

RITEN 1.75" CARBIE TIPPED DEAD CENTER MORSE TAPER #4 090503 (LOC1227B) TS12

  • Laingsburg, Michigan, United States
  • Jan 30th
Brand New OTC 12" 4 JAW D-5 Mount Lathe Chuck 759SO

Brand New OTC 12" 4 JAW D-5 Mount Lathe Chuck 759SO

  • Montville, Ohio, United States
  • Jan 30th
Brand New 10" 3 JAW A-5 Mount Lathe Chuck 758SO

Brand New 10" 3 JAW A-5 Mount Lathe Chuck 758SO

  • Montville, Ohio, United States
  • Jan 30th
Brand New 10" 4 JAW L-2 Mount Lathe Chuck 757SO

Brand New 10" 4 JAW L-2 Mount Lathe Chuck 757SO

  • Montville, Ohio, United States
  • Jan 30th
Shars ER16 Clamping Hex Nut for CNC Milling Collets Chuck Holder Lathe ER 16 NEW

Shars ER16 Clamping Hex Nut for CNC Milling Collets Chuck Holder Lathe ER 16 NEW

  • Saint Charles, Illinois, United States
  • Jan 30th
Kennametak HSK63AHC12090M HYDRAULIC CHUCK

Kennametak HSK63AHC12090M HYDRAULIC CHUCK

  • Waterford, Michigan, United States
  • Jan 30th
TECHNIKS CAT 40 PRECISION ER32 2.76" COLLET CHUCK TOOL HOLDER ER 32 CV40 (22253)

TECHNIKS CAT 40 PRECISION ER32 2.76" COLLET CHUCK TOOL HOLDER ER 32 CV40 (22253)

  • Montville, Ohio, United States
  • Jan 30th
7/8" ACURA-GRIP #901250 Collet

7/8" ACURA-GRIP #901250 Collet

  • Lebanon, Tennessee, United States
  • Jan 30th
Erikson E656-7312 Type F .374 Collet

Erikson E656-7312 Type F .374 Collet

  • Lebanon, Tennessee, United States
  • Jan 30th
5/8" ACURA-GRIP #901250 Collet

5/8" ACURA-GRIP #901250 Collet

  • Lebanon, Tennessee, United States
  • Jan 30th
6" machine vise w/swivel base - lock down type

6" machine vise w/swivel base - lock down type

  • Duluth, Georgia, United States
  • Jan 30th
Suburban Universal Right Angle Iron, URA081012G, 8" x 10" x 12", Ground Finish

Suburban Universal Right Angle Iron, URA081012G, 8" x 10" x 12", Ground Finish

  • Prescott, Arizona, United States
  • Jan 30th
65.5" x 16" x 4.5" Steel T-Slotted Table Cast Iron Welding Layout Fixture weld

65.5" x 16" x 4.5" Steel T-Slotted Table Cast Iron Welding Layout Fixture weld

  • Grand Rapids, Michigan, United States
  • Jan 30th
12 X 12 X 20 SQUARE WORK HOLDING FIXTURE,TOMBSTONE CNC HORIZONTAL MACHING CENTER

12 X 12 X 20 SQUARE WORK HOLDING FIXTURE,TOMBSTONE CNC HORIZONTAL MACHING CENTER

  • Pinellas Park, Florida, United States
  • Jan 30th
LOT OF EYE BRACKETS, 1 1/2 "

LOT OF EYE BRACKETS, 1 1/2 "

  • Lubbock, Texas, United States
  • Jan 30th
LOT OF CAST IRON EYE BRACKETS, 2"

LOT OF CAST IRON EYE BRACKETS, 2"

  • Lubbock, Texas, United States
  • Jan 30th
Yuasa 5 1/4" diameter spacer, indexer, rotary table

Yuasa 5 1/4" diameter spacer, indexer, rotary table

  • Lewisville, Pennsylvania, United States
  • Jan 30th
12" Wide x 49.5" High x 18" Deep Matched Pair of Steel Fabricated Angle Plates

12" Wide x 49.5" High x 18" Deep Matched Pair of Steel Fabricated Angle Plates

  • Hauppauge, New York, United States
  • Jan 30th
Adjustable Tailstock For 12 Inch Rotary Tables

Adjustable Tailstock For 12 Inch Rotary Tables

  • Chino, California, United States
  • Jan 30th
MACHINIST LATHE MILL Unimat Jeweler Hobby Lathe1 1/4" MINI MICRO Vise

MACHINIST LATHE MILL Unimat Jeweler Hobby Lathe1 1/4" MINI MICRO Vise

  • Morris Plains, New Jersey, United States
  • Jan 30th
Vtg CRAFTSMAN Blacksmith Machinist Swivel Anvil Bench Vise Clamp Tool FOR REPAIR

Vtg CRAFTSMAN Blacksmith Machinist Swivel Anvil Bench Vise Clamp Tool FOR REPAIR

  • Brockton, Massachusetts, United States
  • Jan 30th
4'' x 4'' Within x 0.0002'' Fine Pole Magnetic Chucks, #2720-2000

4'' x 4'' Within x 0.0002'' Fine Pole Magnetic Chucks, #2720-2000

  • Toronto, ON, Canada
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies