Chicken Plucking DIY Kit - Whizbang Chicken Plucker-16" pulley, US $394.99 – Picture 0

Chicken Plucking DIY Kit - Whizbang Chicken Plucker-16" pulley, US $394.99 – Picture 1

Chicken Plucking DIY Kit - Whizbang Chicken Plucker-16" pulley, US $394.99 – Picture 2

Chicken Plucking DIY Kit - Whizbang Chicken Plucker-16" pulley, US $394.99 – Picture 3

Chicken Plucking DIY Kit - Whizbang Chicken Plucker-16" pulley, US $394.99 – Picture 4

Chicken Plucking Diy Kit - Whizbang Chicken Plucker-16" Pulley

US $394.99

Jamestown, Ohio, United States
Jan 30th

Open on mobile:
QR code

Great kit for a DIY poultry plucker like the whizbang! For sale is an aluminum plate for a DIY poultry plucker, Steel flanged shaft, Barrel, 2 Bearings (pillow blocks), drive and driven pulleys, and 125 plucking fingers. I've attached a picture of a blank plate and also one with the fingers installed. Please note that the fingers do not come installed, you will have to do that yourself. Please note. To aid in the assembly we have chamfered the back side of the plate. This allows you to pull the fingers through the plate much easier. The plate is made out of .190" 5052-H32 Aluminum and has 66 holes for Poultry plucking fingers. Each of the 66 holes will be chamfered to simplify the assembly of your plucking fingers. There is also one center hole. The shaft is included in this auction. The shaft is made of Steel and measures 15.5" long and has an Outside Diameter of 1". The shaft mounts to the plucker plate with 3 3/8-16 x 1"zinc plated hex head bolts and corresponding nylon insert lock nuts(Supplied). The plucker plate will be pre-drilled to accept the shaft. 3 bolts will pass through the plucker plate and the flange on the shaft (3.5" diameter on the flange). The face of the flange has been machined after welding to fit flush against the plucker plate. 1 - 20.5" Diameter .190" Thick 5052-H32 Aluminum Feather Plate PreDrilled and chamfered on the back side 125 - Rubber Plucking Fingers 1 - 15.5" Steel Shaft with 3.5" Steel Hub (welded construction) to mount to the feather plate (This is predrilled for 3 3/8-16 Bolts) 3 - 3/8-16 x 1" Zinc plated steel hex head bolts and 3 nylon insert lock nuts 1 - Approx 22.5" Diameter Plastic Barrel Cut to the height outlined in the Whizbang Book (approx 20") and Predrilled for the fingers 2 - 2 bolt Flanged 1" Bearings (pillow Block). Both have 1 Grease zerk and 2 set screws. 1 - 2.5" Drive pulley (5/8" Bore) 1 - 16" Driven pulley (1" Bore) * Also included now is the Book "Anyone can build a Tub-style mechanical chicken plucker" to aid in the assembly process!! Bonus - When we cut the barrel off we have the bottom left over. We personally use these to water our chickens. We will include this at no extra charge to you. It will not affect the shipping cost either as the size of the box 24" x 24" x 24" is calculated by UPS as a 72 pound package and this package with the waterer weighs 50 pounds. You'll need to purchase a motor (a 1hp, 1750 rpm motor is recommended), build a frame and purchase a drive belt. Also feel free to ask me any questions about the assembly/construction process, I'd be glad to help. All items are brand new with the exception of the barrel!

Condition	New other (see details) : A new, unused item with absolutely no signs of wear. The item may be missing the original packaging, or in the original packaging but not sealed. The item may be a factory second or a new, unused item with defects. See the seller’s listing for full details and description of any imperfections.
Seller Notes	“All items are brand new with the exception of the barrel. The barrel has been cleaned and washed before re-purposing.”