+ Post new Ad
Cincinnati Monoset Tool and Cutter Grinder, US $18000 – Picture 0
Cincinnati Monoset Tool and Cutter Grinder, US $18000 – Picture 0

Cincinnati Monoset Tool And Cutter Grinder

US $18000

  • Huntington Beach, California, United States
  • Jan 30th
Open on mobile:
QR code
Cincinnati Monoset Tool and Cutter Grinder   S/N: 2DFY611026 CAPACITY - WORK HEAD SWING OVER MAIN SLIDE, MAX. DIA. ... 12" MAX. WORK HEAD COLLET HOLE DIA. .............. 1-1/4" MIN. WORK HEAD COLLET HOLE DIA. .............. 0.12" MAX. GRINDING WHEEL DIA. .................... 4" MAX. LENGTH OF WORK BETWEEN SPINDLE & TAILSTOCK CENTER .......................... 6" RANGE - WORKHEAD SLIDE TRAVEL: LONGITUDINAL .............................. 5-3/4" CROSS ..................................... 5-3/4" WORK HEAD ANGULAR ADJUSTMENT: MAX. TURNTABLE SWIVEL ..................... 235 DEG. ABOVE AND BELOW CENTER .................... 40 DEG. WHEEL HEAD SLIDE TRAVEL: LONGITUDINAL .............................. 6" CROSS ..................................... 7-1/2" WHEELHEAD, VERTICAL MOVEMENT: ABOVE CENTER .............................. 4.5" BELOW CENTER .............................. 5" SPEEDS - (3) WHEEL HEAD SPINDLE SPEEDS ................ 4,000, 5,730, 8,000 RPM (1) WORK HEAD SPINDLE SPEED ................. 436 RPM APPROXIMATE WEIGHT ........................ 1,500 LBS. MACHINE FEATURES: HARD WAYS & SCREWS   Located in Huntington Beach, Ca. Payment in full before removal.  
Condition:
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...
Brand Cincinnati

Directions

Similar products from Other Manufacturing Equipment & Tools

RS, Crimping Press, Stock No. 622-048 with Base

RS, Crimping Press, Stock No. 622-048 with Base

  • Columbia, Maryland, United States
  • Jan 30th
Interstate 365 - 2326 2-1/2" x 12 Spec Carbon Hex Die

Interstate 365 - 2326 2-1/2" x 12 Spec Carbon Hex Die

  • Punta Gorda, Florida, United States
  • Jan 30th
^^ HYDRAULIC UNIT FOR A PRESS? W/ US ELECTRIC 5.0 HP 1755RPM MOTOR

^^ HYDRAULIC UNIT FOR A PRESS? W/ US ELECTRIC 5.0 HP 1755RPM MOTOR

  • Bosque Farms, New Mexico, United States
  • Jan 30th
Eagle CP-30M Angle Bending Roll

Eagle CP-30M Angle Bending Roll

  • Saint Louis, Missouri, United States
  • Jan 30th
Panasonic Battery Charger EY 503 B7658

Panasonic Battery Charger EY 503 B7658

  • Punta Gorda, Florida, United States
  • Jan 30th
CNC ShopSabre controller box ONLY (not the full machine)

CNC ShopSabre controller box ONLY (not the full machine)

  • Kailua Kona, Hawaii, United States
  • Jan 30th
FLEXARM DRILLING AND TAPPING MACHINE

FLEXARM DRILLING AND TAPPING MACHINE

  • Brentwood, California, United States
  • Jan 30th
PROTO Tools Screw & PIPE Extractor Set 9500B 10 Pc

PROTO Tools Screw & PIPE Extractor Set 9500B 10 Pc

  • Burton, Michigan, United States
  • Jan 30th
Hardinge S20 pad 30mm round series (1.1811) serrated collet pad

Hardinge S20 pad 30mm round series (1.1811) serrated collet pad

  • Punta Gorda, Florida, United States
  • Jan 30th
SPC Control Charts Cards

SPC Control Charts Cards

  • United States
  • Jan 30th
12" Brass Number Stencil Number is 12" high x 7-1/2" wide 0-9

12" Brass Number Stencil Number is 12" high x 7-1/2" wide 0-9

  • Punta Gorda, Florida, United States
  • Jan 30th
27 Piece Set PRYOR 5.0mm Handcut Letters Top Import Steel Stamps PP27050 A - Z

27 Piece Set PRYOR 5.0mm Handcut Letters Top Import Steel Stamps PP27050 A - Z

  • Punta Gorda, Florida, United States
  • Jan 30th
Gibraltar 5/16 - 18 S" long Studs pack of 2

Gibraltar 5/16 - 18 S" long Studs pack of 2

  • Punta Gorda, Florida, United States
  • Jan 30th
7/16" inside O Ring MSC H70-013 Thickness 0.0715 outside 0.5805 QTY 100

7/16" inside O Ring MSC H70-013 Thickness 0.0715 outside 0.5805 QTY 100

  • Punta Gorda, Florida, United States
  • Jan 30th
Hardinge BB 2V Vertical Mill Jewelry Watchmaker Milling Machine With Collets

Hardinge BB 2V Vertical Mill Jewelry Watchmaker Milling Machine With Collets

  • Oxnard, California, United States
  • Jan 30th
Static Balancer-Tabletop for cranks, impellers, armatures, etc.

Static Balancer-Tabletop for cranks, impellers, armatures, etc.

  • Monroe, North Carolina, United States
  • Jan 30th
Solid Carbide SGS 13950 SG-6C Burr pointed Tree Double cut 1/4 x 5/8 x 2-3/4

Solid Carbide SGS 13950 SG-6C Burr pointed Tree Double cut 1/4 x 5/8 x 2-3/4

  • Punta Gorda, Florida, United States
  • Jan 30th
Taper Roller Bearing 3.58x 5.959 x 2.169W 6580 Cone

Taper Roller Bearing 3.58x 5.959 x 2.169W 6580 Cone

  • Punta Gorda, Florida, United States
  • Jan 30th
Terry Cloth Extra Heavy Heat Resistant Gloves 12" Length

Terry Cloth Extra Heavy Heat Resistant Gloves 12" Length

  • Punta Gorda, Florida, United States
  • Jan 30th
Albercht Arbor 1/2" Shank - JO taper 3" OAL cylindriacal shank

Albercht Arbor 1/2" Shank - JO taper 3" OAL cylindriacal shank

  • Punta Gorda, Florida, United States
  • Jan 30th

People who viewed this item also vieved

ALUMINUM ROUND DISC 3-3/4" DIA. BAR CIRCLE PLATE ( 2 PCS) 1/2" THICK *VERY NICE!

ALUMINUM ROUND DISC 3-3/4" DIA. BAR CIRCLE PLATE ( 2 PCS) 1/2" THICK *VERY NICE!

  • New Haven, Connecticut, United States
  • Jun 7th
17-4 Stainless Steel 1.25" Round Bar $4.44 per pound

17-4 Stainless Steel 1.25" Round Bar $4.44 per pound

  • Madison, Connecticut, United States
  • Jun 7th
USED 1" (15/16") thick Aluminum 6061 PLATE 6" x 10"

USED 1" (15/16") thick Aluminum 6061 PLATE 6" x 10"

  • Frederick, Maryland, United States
  • Jun 7th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies