+ Post new Ad
Cleko-Loc 1/2" Edge Clamp Lot of 10, US $17.99 – Picture 0
Cleko-Loc 1/2" Edge Clamp Lot of 10, US $17.99 – Picture 0

Cleko-loc 1/2" Edge Clamp Lot Of 10

US $17.99

  • Bonham, Texas, United States
  • Jan 30th
Open on mobile:
QR code
Lot of 10 Cleko-Loc 1/2" Edge Clamps Available - Item Number 45975 These Cleko-Loc 1/2" Edge Clamps are now available for purchase. They are in good condition, though some of them may have glue or fiberglass resin on them. A few appear to be unused. If you're interested in purchasing these clamps, please note that the shipping department closes at noon every day. Any payments received after 10:00 a.m. will ship the next business day. To determine the shipping cost to your zip code or a different country, please use the eBay shipping calculator. Keep in mind that there is a small handling cost added to the actual shipping cost. Lastly, note that we must ship to the address listed in the Paypal payment to be covered by Paypal. Ensure that the listed address is the correct one before submitting payment - we cannot send the item to a different address after payment has been received. Payment is due within 4 days of notification of total payment due. We offer a 14-day DOA warranty for all used working items from the time of receipt. AS IS items are sold for PARTS or SALVAGE ONLY and have NO warranty. We will exchange any defective item or send replacement parts if a part is found to be causing an item to malfunction. For any questions about these Cleko-Loc 1/2" Edge Clamps, phone us at 903-640-4928 during our business hours of Monday through Friday from 8:00 a.m. to 5:00 p.m. Please note that we do not respond to emails on Saturdays or Sundays, as our office is closed on weekends.

Directions

Similar products from Clips & Jaws

Irwin 2025102 Adjustable Iron C-Clamp-2-1/2X1-3/8 C-CLAMP

Irwin 2025102 Adjustable Iron C-Clamp-2-1/2X1-3/8 C-CLAMP

  • Brooklyn, New York, United States
  • Jan 30th
2 Vintage C Clamp Tool Wilton 12" Heavy Duty 412 Drop Forged Steel Machinist USA

2 Vintage C Clamp Tool Wilton 12" Heavy Duty 412 Drop Forged Steel Machinist USA

  • Hoopeston, Illinois, United States
  • Jan 30th
Destaco Clamp 207- U

Destaco Clamp 207- U

  • United States
  • Jan 30th
5 pcs New Hand Tool Toggle Clamp 201A Horizontal Clamp 60lbs 201-A SD-201-A

5 pcs New Hand Tool Toggle Clamp 201A Horizontal Clamp 60lbs 201-A SD-201-A

  • United States
  • Jan 30th
toggle clamp de-sta-co lot of 6

toggle clamp de-sta-co lot of 6

  • Springfield, Illinois, United States
  • Jan 30th
BRAND NEW DE-STA-CO HORIZONTAL HANDLE HOLD DOWN ACTION CLAMP MODEL 213-U

BRAND NEW DE-STA-CO HORIZONTAL HANDLE HOLD DOWN ACTION CLAMP MODEL 213-U

  • Rochester, New York, United States
  • Jan 30th
NEW VLIER HYDRAULIC POWER CLAMP CYLINDER CY-625-5

NEW VLIER HYDRAULIC POWER CLAMP CYLINDER CY-625-5

  • Rochester, New York, United States
  • Jan 30th
(1 pcs) Flange Nuts 3/4" M20 Hexagon Nuts Hex Nut Clamping Kit

(1 pcs) Flange Nuts 3/4" M20 Hexagon Nuts Hex Nut Clamping Kit

  • New Delhi, India
  • Jan 30th
New Tunkers, Inc. SZK 63 A32 T12 Retract Pin Pneumatic Clamp, Mfg'd: 8/2010

New Tunkers, Inc. SZK 63 A32 T12 Retract Pin Pneumatic Clamp, Mfg'd: 8/2010

  • Grand Rapids, Michigan, United States
  • Jan 30th
Toggle Clamp Base All American Bushing Co. #80-134

Toggle Clamp Base All American Bushing Co. #80-134

  • Melbourne, Florida, United States
  • Jan 30th
Toggle Clamp Base All American Bushing Co. #80-442 - 6 holes

Toggle Clamp Base All American Bushing Co. #80-442 - 6 holes

  • Melbourne, Florida, United States
  • Jan 30th
Toggle Clamp Base All American Bushing Co. #80-230

Toggle Clamp Base All American Bushing Co. #80-230

  • Melbourne, Florida, United States
  • Jan 30th
Toggle Clamp Base De-Sta Co. #237U

Toggle Clamp Base De-Sta Co. #237U

  • Melbourne, Florida, United States
  • Jan 30th
Toggle Clamp Base De-Sta Co. #225U

Toggle Clamp Base De-Sta Co. #225U

  • Melbourne, Florida, United States
  • Jan 30th
Toggle Clamp Base De-Sta Co. #640 straight line

Toggle Clamp Base De-Sta Co. #640 straight line

  • Melbourne, Florida, United States
  • Jan 30th
USED DeSTACO CLAMP No.640 STRAIGHT LINE ACTION CLAMP (7500# holding Force)

USED DeSTACO CLAMP No.640 STRAIGHT LINE ACTION CLAMP (7500# holding Force)

  • Fairfield, Iowa, United States
  • Jan 30th
LATCH TYPE TOGGLE CLAMP WITH 380 LBS HOLDING CAPACITY (3900-0408)

LATCH TYPE TOGGLE CLAMP WITH 380 LBS HOLDING CAPACITY (3900-0408)

  • Chino, California, United States
  • Jan 30th
Lot 2 Good Hand Toggle Locking Clamp, Verticle Hold Down Foot Spindle GH-12205

Lot 2 Good Hand Toggle Locking Clamp, Verticle Hold Down Foot Spindle GH-12205

  • Broomfield, Colorado, United States
  • Jan 30th
DE-STA-CO DFF 210 SR Clamp

DE-STA-CO DFF 210 SR Clamp

  • Lebanon, Tennessee, United States
  • Jan 30th
2 Proto Standard Service Extra Deep C-Clamp PROTO-577-110G with case

2 Proto Standard Service Extra Deep C-Clamp PROTO-577-110G with case

  • Camarillo, California, United States
  • Jan 30th

People who viewed this item also vieved

KENNAMETAL ERICKSON COLLET 19/32 UNUSED FROM OLD STOCK. SB6

KENNAMETAL ERICKSON COLLET 19/32 UNUSED FROM OLD STOCK. SB6

  • Cincinnati, Ohio, United States
  • Mar 25th
SANDVIK TAP DRIVER COLLET 22098-20.32-.800

SANDVIK TAP DRIVER COLLET 22098-20.32-.800

  • Wadley, Alabama, United States
  • Mar 25th
LOT of (30) R-S-B SOUTH BEND 5C COLLETS, METRIC: 2mm-27mm

LOT of (30) R-S-B SOUTH BEND 5C COLLETS, METRIC: 2mm-27mm

  • Bremen, Indiana, United States
  • Mar 25th
Dell PRECISION SINE BAR 1970s

Dell PRECISION SINE BAR 1970s

  • Palermo, California, United States
  • May 5th
Used 30" x 21.25" x 44" tall tombstone

Used 30" x 21.25" x 44" tall tombstone

  • Cincinnati, Ohio, United States
  • May 6th
Kreg 30" Aluminum Workshop Jig and Miter Fixture Mounting Bar - Part # KMS7303

Kreg 30" Aluminum Workshop Jig and Miter Fixture Mounting Bar - Part # KMS7303

  • Summerville, South Carolina, United States
  • May 7th
21" WARNER & SWASEY, 4-JAW CHUCK, M-1614-9, T & G JAWS, 6.5" HOLE, A2-11

21" WARNER & SWASEY, 4-JAW CHUCK, M-1614-9, T & G JAWS, 6.5" HOLE, A2-11

  • Waukesha, Wisconsin, United States
  • May 26th
27.5" 4-JAW MANUAL CHUCK, TM, 10.25" HOLE, ONE PIECE JAWS, A2-11

27.5" 4-JAW MANUAL CHUCK, TM, 10.25" HOLE, ONE PIECE JAWS, A2-11

  • Waukesha, Wisconsin, United States
  • May 26th
6 1/4" 3 Jaw Self Centering Poland Lathe Chuck With 2 1/4" rear thread 8ZD

6 1/4" 3 Jaw Self Centering Poland Lathe Chuck With 2 1/4" rear thread 8ZD

  • West Palm Beach, Florida, United States
  • May 27th
WILTON Combination VISE, C0, 3 1/2' JAWS, PIPE JAWS, IN EXCELLENT CONDITION

WILTON Combination VISE, C0, 3 1/2' JAWS, PIPE JAWS, IN EXCELLENT CONDITION

  • Vista, California, United States
  • May 27th
Ridgid F Series Forged Steel Bench Swivel Vise 6" Jaw Width Machinist

Ridgid F Series Forged Steel Bench Swivel Vise 6" Jaw Width Machinist

  • Baton Rouge, Louisiana, United States
  • May 27th
Bridgeport Milling Vise With Jaws (Inv.33315)

Bridgeport Milling Vise With Jaws (Inv.33315)

  • Portland, Connecticut, United States
  • May 28th
ROYAL Value-Turn Live Center Point Length : 7/8'' Overall Length : 5-7/8''

ROYAL Value-Turn Live Center Point Length : 7/8'' Overall Length : 5-7/8''

  • Duncan, South Carolina, United States
  • May 24th
BISON Ultra Precision Adjustable Heavy Duty Live Center Point Length : 2.44''

BISON Ultra Precision Adjustable Heavy Duty Live Center Point Length : 2.44''

  • Duncan, South Carolina, United States
  • May 24th
ROYAL ROYAL Dead Center Carbide-Tipped Point POINT DIAMETER: 0.700''

ROYAL ROYAL Dead Center Carbide-Tipped Point POINT DIAMETER: 0.700''

  • Duncan, South Carolina, United States
  • May 24th
Magna-Lock Vacuum Chuck Controller Unit, Used

Magna-Lock Vacuum Chuck Controller Unit, Used

  • Middlebury, Connecticut, United States
  • May 31st
CARR LANE Clamping Valves (3-Way) CLR-439-VA

CARR LANE Clamping Valves (3-Way) CLR-439-VA

  • Jackson, Michigan, United States
  • May 31st
MACHINIST TOOL LATHE MILL Machinist Starrett # 5190 Screw Jack Set in Box

MACHINIST TOOL LATHE MILL Machinist Starrett # 5190 Screw Jack Set in Box

  • Morris Plains, New Jersey, United States
  • May 31st
large Indexing Dividing Head L-W Chuck Co. Toledo Ohio USA WITH CHUCK

large Indexing Dividing Head L-W Chuck Co. Toledo Ohio USA WITH CHUCK

  • Clermont, Georgia, United States
  • Jun 4th
25" Troyke T-slotted Rotary Table Model BH-25

25" Troyke T-slotted Rotary Table Model BH-25

  • Reading, Pennsylvania, United States
  • Jun 4th
4" HORIZONTAL & VERTICAL ROTARY TABLE PRIME QUALITY 4 INCH HV ROTARY TABLE

4" HORIZONTAL & VERTICAL ROTARY TABLE PRIME QUALITY 4 INCH HV ROTARY TABLE

  • Diamond Bar, California, United States
  • Jun 4th
MACHINIST LATHE MILL Machninst Large Ground Set Up Block Fixture Step Block

MACHINIST LATHE MILL Machninst Large Ground Set Up Block Fixture Step Block

  • Morris Plains, New Jersey, United States
  • Jun 4th
MAGNETIC V BLOCK, 2 SIDED - 1" & 2"

MAGNETIC V BLOCK, 2 SIDED - 1" & 2"

  • Pinellas Park, Florida, United States
  • Jun 4th
1.75” x 1.75” x 2” Vee Block

1.75” x 1.75” x 2” Vee Block

  • Euclid, Ohio, United States
  • Jun 4th
Hertel HCV50ER32400 Collet Chuck Series ER-32

Hertel HCV50ER32400 Collet Chuck Series ER-32

  • Venice, Florida, United States
  • Jun 9th
B&V collet chuck 20 MM w/ case

B&V collet chuck 20 MM w/ case

  • Montebello, California, United States
  • Jun 9th
Lot Of 2 SANDVIK COROMANT C6-391.14-20 060 Collet Chuck Adapters

Lot Of 2 SANDVIK COROMANT C6-391.14-20 060 Collet Chuck Adapters

  • San Bernardino, California, United States
  • Jun 9th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies