Cleveland 2001G Style High Speed Steel Jobbers Drill Bit Black Oxide Round Sha, US $51.12 – Picture 0

Cleveland 2001G Style High Speed Steel Jobbers Drill Bit Black Oxide Round Sha, US $51.12 – Picture 1

Cleveland 2001g Style High Speed Steel Jobbers Drill Bit Black Oxide Round Sha

US $51.12

United States
Feb 22nd

Open on mobile:
QR code

NO SALES TAX FAST SHIPPING FOR US BUYERS NEW Cleveland 2001G Style High Speed Steel Jobbers Drill Bit Black Oxide Round Shank 118 Degree Point Wire Size #9(Pack of 12) $51.12 $68.95 The Cleveland 2001G, also called CLE-MAX 2001G, is a jobber length, vanadium steel drill bit has a 38-degree helix angle, with a 118-degree conventional point and black oxide surface treatment, is suitable for general-purpose drilling applications. Jobber length provides a longer reach and more rigidity than shorter lengths. The shank diameter is the same as the drill size. While the 2001G series of drill bits can be used for drilling into most material, it is most suitable for drilling into low carbon steel, cast iron, aluminum, and copper alloys. Black oxide, also called steam oxide improves lubricity, resists corrosion, and resists flaking. It also helps prevent buildup and welding of material on the tool?s cutting edge when machining iron and steel. Spiral flutes act as a passageway for chip removal and for coolant to enter the hole. The twist of the flutes brings chips up and away from the cutting edge. The 118-degree drill point is the most common angle for general purpose drilling across a wide range of materials. The faster helix angle provides greater lifting power for chip removal than a lesser helix angle. Round shanks allow use with a variety of tool holders. Vanadium steel is high-speed steel (HSS) with a high percentage of vanadium, for greater heat resistance and an increased ability to hold an edge over high-speed steel (HSS).They adhere to Deutsches Institut f?r Normung (DIN) 338 standards. The tolerances for various aspects of the Cleveland drill bits are: drill diameter range through 1/8? +0.0000?/-0.0005?, over 1/8? to 1/4? +0.0000?/-0.0007?, over 1/4? to 1/2? +0.0000?/-0.0010?, over 1/2? to 1? +0.0000?/-0.0012?, over 1? to 2? +0.0000?/-0.0015?, over 2? to 3-1/2? +0.0000?/-0.0020?; drill overall length and flute length #80 through 1/8? +0.1250?/-0.0626?, over 1/8? to 1/2? +0.1250?/-0.1250?, over 1/2? to 1? +0.2500?/-0.1250?, over 1? to 2? +0.2500?/-0.2500?, over 2? to 3-1/2? +0.3750?/-0.3750?; drill point angle diameter range 1/16? to 1/2? included angle 118 or 135 degrees +/-5 degrees, over 1/2? to 1 1/2? included angle 118 degrees +/-3 degrees, over 1-1/2? to 3-1/2? includes angle 118 degrees +/- 2 degrees; drill lip height diameter range 1/16? to 1/8? total indicator variation 0.0020?, over 1/8? to 1/4? total indicator variation 0.0030?, over 1/4? to 1/2? total indicator variation 0.0040?, over 1/2? to 1? total indicator variation 0.0050?, over 1? to 3 1/2? total indicator variation 0.0060?. Drill bits are cutting tools used to make holes in a range of materials. They are used in machines such as handheld portable drills, drill presses, machining centers, and lathes. Drill bits come in a variety of types and lengths. Twist drill bits are the most common type of drill bit. They are a round, twisted shaft, end-cutting tool with two or more cutting edges and two or more flutes. Jobber drill bits are the most common length of twist bit. They offer a good comprise of length and reach to work with the widest range of materials and applications. Greenfield Industries manufactures tools under the brand names Cleveland, Chicago-Latrobe, Cle-Line, Vermont Tap & Die, Bassett, Putnam Tools, Geometric, Vers-O-Tool, H & G, and Acme-Fette. The company, owned by Top-Eastern Group and headquartered in Seneca, SC, makes tools that meet American National Standards Institute (ANSI), National Aerospace Standard (NAS), and Deutsches Institut f?r Normung (DIN) standards. - Vanadium steel for greater heat resistance than high-speed steel (HSS) - Black oxide improves lubricity, resists corrosion, and resists flaking, and also helps prevent buildup of material on the tool's cutting edge - Jobber-length, for a wide range of applications - 118-degree conventional point angles, for general drilling applications - Round shanks, for use with a variety of tool holders We only accept PayPal. + We are now shipping to worldwide addresses, the item is sent to logistic center in NJ and shipped from there to the rest of the world + International customers are responsible for all duties and taxes. Contact your local authority for questions related to the amount of duties or taxes you will be responsible for. + We ship within two business days of payment, usually sooner. + Standard FREE shipping takes between 3-5 business days + We use a selection of shipping services such as UPS, FedEx, USPS etc. + Expedited shipping takes between 2-3 business days + Overnight shipping takes between 1-2 business days (Ships within 12 hours of payment) + We do not accept P.O. BOXES -PLEASE PROVIDE A PHYSICAL ADDRESS. We accept returns within 14 days from date you received the purchase. Please contact us for a Return Merchandise Authorization (RMA) number. Customer satisfaction is very important to us. If you have any problem with your order,please contact us and we will do our best to make you satisfied, please do not leave a negative feedback. We guarantee that your issue will be solved quickly. As long as you are happy with your purchase, please leave a positive feedback for us. Your feedback and DSRs are very important to us as better DSR scores affects our search placement on eBay. We will leave a positive feedback for you in return automatically . Thank you for looking at our list! You're welcome to watch other items we sell. If you have any questions please feel free to ask - We're always happy to answer your queries.

Condition:

New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...

UPC

697334711094