CNC Router, Possible Plasma Table, NO RESERVE!, US $5900 – Picture 0

CNC Router, Possible Plasma Table, NO RESERVE!, US $5900 – Picture 1

CNC Router, Possible Plasma Table, NO RESERVE!, US $5900 – Picture 2

CNC Router, Possible Plasma Table, NO RESERVE!, US $5900 – Picture 3

CNC Router, Possible Plasma Table, NO RESERVE!, US $5900 – Picture 4

Cnc Router, Possible Plasma Table, No Reserve!

US $5900

Newport News, Virginia, United States
Jun 9th

Open on mobile:
QR code

3 Axis 10' x 12' CNC router. We built this table to do a job. It has a vacuum table but never plumbed it and don't have pump for it. It has a registered copy of Mach 3 software. The table was originally 30' long but was shortened after the job was completed because of space. The table could be cut in half easily to make two 6' x 10' tables. Could also be made into a cnc plasma table. The job we did required +/- .008" tolerance and it held everything within .004". I just don't have the space for it any longer. We used a porter cable router but it is not included. The sign photo was drawn with a pen in place of the router and was ran twice. There is a vacuum attachment for the head to pick up chips. We have cut plastic, wood and aluminum with the porter cable (not included). Can cut other materials depending on router or spindle size that you install. Shipping would be actual shipping costs plus cost of building crate. Legs and frame could be strapped to a pallet for shipment but bridge and electronics need to be crated. The table is two 5' x 10' and one 2' x 10' sections and is 3/4" mdf. The bridge comes off as one unit with all electronics attached. I put x and y limit switches on it but never installed the stops. Runs fine without them, but they are there. Has the contactor/switch to run the router with the sofwtare if desired. May be willing to deliver disassembled components depending on location..Table is located in Newport News, VA.