Cobra 5 Air Duct Cleaning Machine, US $1,450.00 – Picture 0

Cobra 5 Air Duct Cleaning Machine, US $1,450.00 – Picture 1

Cobra 5 Air Duct Cleaning Machine, US $1,450.00 – Picture 2

Cobra 5 Air Duct Cleaning Machine

US $1,450.00

East Brunswick, New Jersey, United States
Jan 29th

Open on mobile:
QR code

The new Cobra 5 Power Brush system from Air-Care is an advanced version of the workhorse that has been aggressively cleaning air ducts for 4 decades. Continuously Variable Speed Control 35 Ft Long Cable/Brush Forward/Reverse Wired Remote The Cobra 5 has a wired, handheld remote. It has Forward, Stop, and Reverse functions at the operators finger tips. Of course there are manual backup controls on the main motor box also. A guide to speed selection for most jobs is contained on the inside of the motor box. The control panel has a variable speed motor dial that allows you to go from 0-1750 RPM. The motor has plenty of torque to run the standard 3/8" steel cored cable for most ducts, but also has a "Low Torque" setting for use with the Dryer Duct Cable and 4" diameter brush or the Nest Claw. The cable mount is the same as all previous Cobra Cables, so you have backward compatibility as well as forward compatibility with other models of Air-Care Cobras Specification COBRA-5 Size: 11.5" W x 15" L x 10" H. Weight: Motor Case with Remote: 28 lbs. - 3/8" Cable & Brush: 14 lbs. - Dryer duct cable & Brush: 5 lbs. Power requirements: 115v 60 Hz AC, 7.5 amps (Optional 220 Volt 50/60 Hz) Power Cord: 9 foot grounded plug with "computer" type connecting socket Cable Sizes: Standard: 3/8" Core, 3/4" O.D. Nylon Housing, 35’ Long (optional 50 ft cable available) Optional: 5/16" core, 1/2 " Housing Dryer Duct Cable, available in 20-Foot or 35-Foot Lengths. Comes with 4" Dryer Duct Brush. Brushes: Standard: 18" Flex-E-Bristle Brush, Standard Black Bristles, for 4" to 18" ducts. Optional: 12" Flex-E-Bristle Brush, Standard Black Bristles, for 4" to 12" ducts. Optional: 36" Flex-E-Bristle Brush, Commercial Black Bristles, for 14" to 30" ducts Optional: 4" Dryer Duct Brush, w/ Lint Buster Ball, for Flatted Cobra Cable Operating Environment: 25 to 125 Deg. F (-4 to 50 Deg. C) Construction: High Impact Black ABS with Hinged cover to protect controls Panel Controls: Power Switch, Speed Dial and Fwd-Stop-Rev switch on Motor Unit Remote 15’ Remote Cable, FWD-Stop-Reverse Controller: 90 Volt DC Controller with Speed, Torque and Load Correction with "HIGH" and "LOW" Torque Settings

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Brand	air-care
Country/Region of Manufacture	United States
Model	COBRA-5