Coherent Avia Laser Nd:yvo4 Vanadate Crystal In Mount

US $900

  • Dublin, California, United States
  • May 28th
Coherent vanadate crystal in heavy gold plated copper mount. This one is cylindrical though most are rectangular and is in perfect condition. Crystal is 17mm x 3mm. See picture of similar unit in Avia laser for typical placement in laser. This type is usually mounted to 2 thermoelectric coolers and a heavy copper block about an 1" thick (see illustration pic), I'm going from memory here. If you want to go that route, I suggest buying 2 ea. Tec units 40mm x 40mm. You can get Chinese ones for about $5.00 ea. on ebay or get some nice Melcor or Marlow units at a bit more expense. There are also some copper blocks on ebay 1" x 2" x4" for around $25.00 I removed what was left of the broken ones attached so you have a clean surface to attach new ones if so desired. I would use Arctic alumina's 2 part 5 min. thermal epoxy. The 10K thermistor has one wire missing so it's a good thing there is another hole on the opposite side for a new one. I am including 2 compatible thermistors from Redfish that have the same specs as the coherent ones. I will epoxy one in place if you want. I'll leave that up to you. Another option is to heat the whole assembly on a hot plate to melt the indium solder holding the 3 copper plates together and remove the crystal. You can then install it in another mount of your choosing. Foreign buyers: To save on shipping I offer first class but you MUST include an extra $12.50 for registered mail service so we can have tracking. ( I will include the extra fee upon checkout.)   

Directions

Similar products from Laser Equipment

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies