+ Post new Ad
Collet Closer- 3AT-3C, US $230 – Picture 0
Collet Closer- 3AT-3C, US $230 – Picture 0

Collet Closer- 3at-3c

US $230

  • Cape Coral, Florida, United States
  • May 7th
Open on mobile:
QR code
Up for bid is either a 3C or 3AT collet nose piece.I have tried a 3AT collet and it fits fine. The widest measurement on the face of the closer is 7/8in.I believe it will work on either collet but this is only a guess. Sold as is used.

Directions

Similar products from Collet Chucks & Sets

JACOBS RUBBER FLEX COLLET CHUCK 500 SERIES

JACOBS RUBBER FLEX COLLET CHUCK 500 SERIES

  • Mount Vernon, New York, United States
  • May 13th
3 SET SPECIAL FIXTURES BLOCK CHUCK MILL LATHE GRINDER FOR 5C COLLET

3 SET SPECIAL FIXTURES BLOCK CHUCK MILL LATHE GRINDER FOR 5C COLLET

  • Los Angeles, California, United States
  • May 13th
Gorton Collets with 3 Flats

Gorton Collets with 3 Flats

  • Traverse City, Michigan, United States
  • May 12th
BALAS 2 MORSE TAPER 2MT-C3-1 COLLET CHUCK LATHE MILL DRILL HOLDER

BALAS 2 MORSE TAPER 2MT-C3-1 COLLET CHUCK LATHE MILL DRILL HOLDER

  • Los Angeles, California, United States
  • May 11th
Universal Engineering Acura-Grip #911886 Collet Chuck with 21 Collets

Universal Engineering Acura-Grip #911886 Collet Chuck with 21 Collets

  • Garden City, Idaho, United States
  • May 11th
Nikken HSK63A-C1.1/4-110, HSK63A-C1 1/4-110 Milling Chuck. lot#3

Nikken HSK63A-C1.1/4-110, HSK63A-C1 1/4-110 Milling Chuck. lot#3

  • Cornell, Illinois, United States
  • May 10th
Clarkson Autolock Type "S" Chuck for Cutters with metal box and 1 Collet

Clarkson Autolock Type "S" Chuck for Cutters with metal box and 1 Collet

  • Littleton, Colorado, United States
  • May 9th
JACOBS MODEL 50 COLLET CHUCK FITS, Atlas, clausing, logan, so. bend1 1/2"-8 TPI

JACOBS MODEL 50 COLLET CHUCK FITS, Atlas, clausing, logan, so. bend1 1/2"-8 TPI

  • Spring Valley, California, United States
  • May 8th
Royal accu-length/dead-length 5c collet chuck

Royal accu-length/dead-length 5c collet chuck

  • Springfield, Massachusetts, United States
  • May 8th
ETM ER-11 Through ER-40 Tapping Attachment Shank Length : 3.15"

ETM ER-11 Through ER-40 Tapping Attachment Shank Length : 3.15"

  • Flushing, New York, United States
  • May 7th
Young Bros Stamp Works 3/32 inch Steel Set 36 Combo Figure Letter Character USA

Young Bros Stamp Works 3/32 inch Steel Set 36 Combo Figure Letter Character USA

  • Marion, New York, United States
  • May 6th
Hardinge HV-4 5C Collet Index Fixture Horizontal/Vertical Mill Machine Fab

Hardinge HV-4 5C Collet Index Fixture Horizontal/Vertical Mill Machine Fab

  • Prescott, Arizona, United States
  • May 6th
Starrett WW Collet #10 New for Watchmakers Lathe - NEW - 8mm Jewelers Lathe Size

Starrett WW Collet #10 New for Watchmakers Lathe - NEW - 8mm Jewelers Lathe Size

  • United States
  • May 5th
SYIC BT50XER40-80 G:2.5 RPM:20000

SYIC BT50XER40-80 G:2.5 RPM:20000

  • Ashdod, Israel
  • May 4th
GERMANY 135mm - 145mm PIN HOOK SPANNER WRENCH CNC MILL TOOL

GERMANY 135mm - 145mm PIN HOOK SPANNER WRENCH CNC MILL TOOL

  • Iron River, Michigan, United States
  • May 4th
BIG Daishowa Multi Spindle Head Bt40

BIG Daishowa Multi Spindle Head Bt40

  • Webster, Florida, United States
  • May 4th
OD GRINDER SPINDLE grinding machine tool

OD GRINDER SPINDLE grinding machine tool

  • Milroy, Indiana, United States
  • May 3rd
LOT of 18 - 5C COLLETS lathe mill grinder 5 c work holder tools VARIOUS MFG

LOT of 18 - 5C COLLETS lathe mill grinder 5 c work holder tools VARIOUS MFG

  • Milroy, Indiana, United States
  • May 3rd
Jacobs Model 50 Collet Chuck for 2-1/4 x 8 tpi lathe spindle

Jacobs Model 50 Collet Chuck for 2-1/4 x 8 tpi lathe spindle

  • Selinsgrove, Pennsylvania, United States
  • May 2nd
ER25 COLLET CHUCK AND 16 PC COLLET SET TECHNIKS COLLETS/SOWA GS CHUCK

ER25 COLLET CHUCK AND 16 PC COLLET SET TECHNIKS COLLETS/SOWA GS CHUCK

  • United States
  • May 2nd

People who viewed this item also vieved

Hardinge 5C Hex Collet - 1/2" No Internal Threads #10010029005000

Hardinge 5C Hex Collet - 1/2" No Internal Threads #10010029005000

  • West Warwick, Rhode Island, United States
  • Feb 27th
Hardinge 1J Collet 23/32" Round # 15130019007187 / No Internal Threads

Hardinge 1J Collet 23/32" Round # 15130019007187 / No Internal Threads

  • West Warwick, Rhode Island, United States
  • Feb 27th
Hardinge 39 pc 5C collet Lot, and 24 5c collets form other MFGs total of 63 pcs

Hardinge 39 pc 5C collet Lot, and 24 5c collets form other MFGs total of 63 pcs

  • Schwenksville, Pennsylvania, United States
  • Feb 27th
8" L-00 MOUNT CAST IRON DOG DRIVE FACE PLATE LATHE

8" L-00 MOUNT CAST IRON DOG DRIVE FACE PLATE LATHE

  • Highland, New York, United States
  • Feb 27th
5C COLLET INDEXING SPINNER COLLET BLOCKS & RIVETT COLLETS

5C COLLET INDEXING SPINNER COLLET BLOCKS & RIVETT COLLETS

  • Franklinville, New York, United States
  • Feb 27th
Interstate 7" x 10" Tilting Table MSC # 00146027

Interstate 7" x 10" Tilting Table MSC # 00146027

  • Reno, Nevada, United States
  • Feb 27th
5 Knu Vise P-400 Locking Clamps Aircraft Tools Aviation &1 De Sta Co 441-2 (C1)

5 Knu Vise P-400 Locking Clamps Aircraft Tools Aviation &1 De Sta Co 441-2 (C1)

  • Lancaster, California, United States
  • Mar 4th
101EL 360Kg 794 Lbs Capacity Quick Holding Vertical Toggle Clamp

101EL 360Kg 794 Lbs Capacity Quick Holding Vertical Toggle Clamp

  • Hong Kong, Hong Kong
  • Mar 5th
100Kg 220 Lbs Capacity Metal U Bar Vertical Type Toggle Clamp Kwtms

100Kg 220 Lbs Capacity Metal U Bar Vertical Type Toggle Clamp Kwtms

  • Hong Kong, Hong Kong
  • Mar 5th
Reed MFG. Co. Erie, Pa. No. 71 Pipe Vise Patent - Cast Iron

Reed MFG. Co. Erie, Pa. No. 71 Pipe Vise Patent - Cast Iron

  • Reseda, California, United States
  • Mar 5th
RIDGID TOOLS USA. B-Y-2-A PIPE VISE Bumper Mount

RIDGID TOOLS USA. B-Y-2-A PIPE VISE Bumper Mount

  • Middletown, Ohio, United States
  • Mar 5th
WILTON C1 VISE

WILTON C1 VISE

  • San Francisco, California, United States
  • Mar 5th
Walker Ceramax Magnetic Chuck 4x4 BXM-2398c

Walker Ceramax Magnetic Chuck 4x4 BXM-2398c

  • Seekonk, Massachusetts, United States
  • Mar 6th
NICE !! ENGLAND 5 " 3 JAW CHUCK W/ PLAIN BACK MOUNT

NICE !! ENGLAND 5 " 3 JAW CHUCK W/ PLAIN BACK MOUNT

  • El Monte, California, United States
  • Mar 6th
MMK HA5-6-35 6" Power Lathe Chuck

MMK HA5-6-35 6" Power Lathe Chuck

  • Kalamazoo, Michigan, United States
  • Mar 6th
Lathe (points ) dead center Wood lathe ? #2 morse taper

Lathe (points ) dead center Wood lathe ? #2 morse taper

  • Dowling, Michigan, United States
  • Mar 12th
Atlas craftsman lathe live center #2 morse taper south bend

Atlas craftsman lathe live center #2 morse taper south bend

  • Hoffman Estates, Illinois, United States
  • Mar 12th
Two MT0 Dead Centers (Male & Female) Morse Taper 0 Set

Two MT0 Dead Centers (Male & Female) Morse Taper 0 Set

  • Ukraine, Ukraine
  • Mar 12th
C Clamp, Vintage CINCINNATI (8") No. 44 Heavy Duty C Clamp with Wing Knob, USA

C Clamp, Vintage CINCINNATI (8") No. 44 Heavy Duty C Clamp with Wing Knob, USA

  • Saunderstown, Rhode Island, United States
  • Jun 27th
Original Craftsman 101 Atlas 618 6" Lathe Countershaft Assembly L9-20A 9-21

Original Craftsman 101 Atlas 618 6" Lathe Countershaft Assembly L9-20A 9-21

  • Waterbury, Connecticut, United States
  • Jun 28th
CHICK VISE, E-SERIES, MACHINEABLE JAWS.

CHICK VISE, E-SERIES, MACHINEABLE JAWS.

  • Sparta, Wisconsin, United States
  • Jun 29th
Precision V-Block & Set 150x80x135mm Prismen Winkelprisma Satz USSR Lot 1pcs+

Precision V-Block & Set 150x80x135mm Prismen Winkelprisma Satz USSR Lot 1pcs+

  • Balti, Balti, Moldova
  • May 28th
Precision V-Block & Set 200x100x180mm Prismen Winkelprisma Satz USSR Lot 1pcs+

Precision V-Block & Set 200x100x180mm Prismen Winkelprisma Satz USSR Lot 1pcs+

  • Balti, Balti, Moldova
  • May 28th
BROWN & SHARPE MAGNETIC V-BLOCK 5 1/4" X 2 1/2" X 3 1/8"

BROWN & SHARPE MAGNETIC V-BLOCK 5 1/4" X 2 1/2" X 3 1/8"

  • Naperville, Illinois, United States
  • May 28th
ROTARY TABLE B44-85 (11100391-2)

ROTARY TABLE B44-85 (11100391-2)

  • george town, penang, Malaysia
  • May 29th
6" Rotary Table Horizontal/Vertical Phase II -NEW-Clausing Rockwell Mill Milling

6" Rotary Table Horizontal/Vertical Phase II -NEW-Clausing Rockwell Mill Milling

  • Franklin, Tennessee, United States
  • May 29th
YUASA 8" INDEXER/SUPER SPACER

YUASA 8" INDEXER/SUPER SPACER

  • Rainbow City, Alabama, United States
  • May 29th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies