+ Post new Ad
Collis Tool Morse taper to shaft adapter # 68843, US $64 – Picture 0
Collis Tool Morse taper to shaft adapter # 68843, US $64 – Picture 0

Collis Tool Morse Taper To Shaft Adapter # 68843

US $64

  • Arden, North Carolina, United States
  • May 27th
Open on mobile:
QR code
 Collis Tool adapter Item # 68843 Specifications Extension Size 2 in. Adapter Size (A) 1 3/8 in. Morse Taper Hole (B) 2 Shank Length (C) 4 5/8 in. Thread Size (D) 1 3/8-12 Diameter (E) 1 1/4 in. Dim. F 2 5/8 in. Dim. G 1 7/8 in. Dim. H 1/4 x 1 in. Dim. K 3/8 in. Dim. L 1 1/2 in. Adj. Nut(J) 66607 Unused, old inventory Buyer pays shipping Accept Paypal

Directions

Similar products from Adapters & Arbor Tool Holders

Milwaukee 48-03-4410 Shockwave 1/2-Inch Square by 1/4-Inch Hex Adapter

Milwaukee 48-03-4410 Shockwave 1/2-Inch Square by 1/4-Inch Hex Adapter

  • USA, United States
  • May 27th
# 2 morse taper shank extended arbor #2 to #2 drilling lathe deep holes

# 2 morse taper shank extended arbor #2 to #2 drilling lathe deep holes

  • Hopatcong, New Jersey, United States
  • May 27th
BRAND NEW MADE BY WELDON NST 50 TAPER -1" END MILL ADAPTER FREE SHIPPING

BRAND NEW MADE BY WELDON NST 50 TAPER -1" END MILL ADAPTER FREE SHIPPING

  • Seekonk, Massachusetts, United States
  • May 27th
NMTB-40 1" X 8-1/2" MILLING ARBOR HORIZONTAL MILL

NMTB-40 1" X 8-1/2" MILLING ARBOR HORIZONTAL MILL

  • Highland, New York, United States
  • May 27th
Morse taper extention MT3 SHANK to MT2 hole

Morse taper extention MT3 SHANK to MT2 hole

  • Clarkston, Michigan, United States
  • May 27th
Thermocarbon Dicing Blade Flange (Part # - 3BA - 230)

Thermocarbon Dicing Blade Flange (Part # - 3BA - 230)

  • Ramona, California, United States
  • May 27th
Thermocarbon Dicing Blade Flange (Part # - 2.187BA - 150)

Thermocarbon Dicing Blade Flange (Part # - 2.187BA - 150)

  • Ramona, California, United States
  • May 27th
MORSE TAPER ADAPTOR 1-2" GT50012

MORSE TAPER ADAPTOR 1-2" GT50012

  • Elyria, Ohio, United States
  • May 27th
Yuasa 3/4" End Mill Holder With R-8 Shank Fits Bridgeport Milling Machine

Yuasa 3/4" End Mill Holder With R-8 Shank Fits Bridgeport Milling Machine

  • Millstadt, Illinois, United States
  • May 27th
Jacobs chuck arbor with #2 morse taper

Jacobs chuck arbor with #2 morse taper

  • Lincoln, Nebraska, United States
  • May 27th
3/8" W&S Tool Holder

3/8" W&S Tool Holder

  • York, South Carolina, United States
  • May 27th
Collis 60655 6X5MT Short Extension Socket

Collis 60655 6X5MT Short Extension Socket

  • Kansas City, Missouri, United States
  • May 27th
#30 NMTB X 1-1/2 INCH SHELL END MILL HOLDER (3900-0745)

#30 NMTB X 1-1/2 INCH SHELL END MILL HOLDER (3900-0745)

  • Chino, California, United States
  • May 27th
1/2 INCH TO JT33 DRILL CHUCK ARBOR (3700-0170)

1/2 INCH TO JT33 DRILL CHUCK ARBOR (3700-0170)

  • Chino, California, United States
  • May 27th
#40 NMTB X 3/8 INCH END MILL HOLDER (3900-1702)

#40 NMTB X 3/8 INCH END MILL HOLDER (3900-1702)

  • Chino, California, United States
  • May 27th
1-1/4" BIG TAP TAPPING HOLDER ARBOR W/ .555" SHANK

1-1/4" BIG TAP TAPPING HOLDER ARBOR W/ .555" SHANK

  • Chino, California, United States
  • May 27th
VALENITE VT63-63-100

VALENITE VT63-63-100

  • Plainville, Connecticut, United States
  • May 27th
Schmidt Press Type 5 Rack and Piston Manual Toggle Press 5R-02-1999

Schmidt Press Type 5 Rack and Piston Manual Toggle Press 5R-02-1999

  • San Jose, California, United States
  • May 27th
CNC Spring Loaded Engraving Tool Holder

CNC Spring Loaded Engraving Tool Holder

  • Albion, Michigan, United States
  • May 27th
Two NMTB50 DeVLIEG T50U-BC6-E1 MICROBORE C6 COLLET HOLDERS used

Two NMTB50 DeVLIEG T50U-BC6-E1 MICROBORE C6 COLLET HOLDERS used

  • Farmington, Michigan, United States
  • May 27th

People who viewed this item also vieved

1 Pafana Boring Bar Shank 1" Triangle VNMG Length

1 Pafana Boring Bar Shank 1" Triangle VNMG Length

  • Columbus, Ohio, United States
  • Jan 30th
5/16" x 4" RH SCLCR Coolant Through Indexable Boring Bar with Insert, #2800-0034

5/16" x 4" RH SCLCR Coolant Through Indexable Boring Bar with Insert, #2800-0034

  • Richmond Hill, Ontario, Canada
  • Jan 30th
Jacobs Chuck 0065432 DIN 371 Rigid Tap Collet 1 M10 10.0mm Shank 8.0mm Drive

Jacobs Chuck 0065432 DIN 371 Rigid Tap Collet 1 M10 10.0mm Shank 8.0mm Drive

  • Wichita, Kansas, United States
  • Jan 30th
Jacobs Chuck 0065442 DIN 371 Rigid Tap Collet 1 M4 2.8mm Shank 2.1mm Drive

Jacobs Chuck 0065442 DIN 371 Rigid Tap Collet 1 M4 2.8mm Shank 2.1mm Drive

  • Wichita, Kansas, United States
  • Jan 30th
LOT 4 NEW MARTIN 1215 28MM TAPER BUSHING D387792

LOT 4 NEW MARTIN 1215 28MM TAPER BUSHING D387792

  • Delta, Ohio, United States
  • Jan 30th
LOT 2 NEW MARTIN 2012 38MM TAPER BUSHING D387778

LOT 2 NEW MARTIN 2012 38MM TAPER BUSHING D387778

  • Delta, Ohio, United States
  • Jan 30th
INGERSOLL CAT 50 1.5" ARBOR 6.5" PRO 764C033 29 L 4514574 B (LOC1205B) TS12

INGERSOLL CAT 50 1.5" ARBOR 6.5" PRO 764C033 29 L 4514574 B (LOC1205B) TS12

  • Laingsburg, Michigan, United States
  • Jan 30th
Universal Acura-Flex Collet Chuck Cat 50 Shank 91957 AF162-AF213 7/32-1"

Universal Acura-Flex Collet Chuck Cat 50 Shank 91957 AF162-AF213 7/32-1"

  • Flint, Michigan, United States
  • Jan 30th
Jacobs drill chuck Model 7BA 3/8-24 New in box 0-1/4 ~ 06255 Nice!!!

Jacobs drill chuck Model 7BA 3/8-24 New in box 0-1/4 ~ 06255 Nice!!!

  • Staten Island, New York, United States
  • Jan 30th
Milwaukee 45-04-0750 Chuck Retaining Screw

Milwaukee 45-04-0750 Chuck Retaining Screw

  • Staten Island, New York, United States
  • Jan 30th
DEVLIEG Micro Adjustable Boring Bar 4MT-552T

DEVLIEG Micro Adjustable Boring Bar 4MT-552T

  • Endicott, New York, United States
  • Jan 30th
SANDVIK 5 x DNGA 150408S01030 AWH 7015

SANDVIK 5 x DNGA 150408S01030 AWH 7015

  • Duisburg, Germany
  • Jan 30th
EPPINGER VDI 40 FORM B5 RIGHT HAND LONG TURNING TOOL HOLDER

EPPINGER VDI 40 FORM B5 RIGHT HAND LONG TURNING TOOL HOLDER

  • Cleveland, Ohio, United States
  • Jan 30th
Mapal Reamer 0-26211-62299

Mapal Reamer 0-26211-62299

  • Aurora, Indiana, United States
  • Jan 30th
Recoil Lug Alignment Tool for Remington or Savage

Recoil Lug Alignment Tool for Remington or Savage

  • Terrebonne, Oregon, United States
  • Feb 13th
KDK #202 QUICK CHANGE TOOL HOLDER

KDK #202 QUICK CHANGE TOOL HOLDER

  • Anaheim, California, United States
  • Feb 13th
1.5KW AIR-COOLE SPINDLE MOTOR CNC MILL ENGRAVING ER16&1.5kw INVERTER DRIVE VFD

1.5KW AIR-COOLE SPINDLE MOTOR CNC MILL ENGRAVING ER16&1.5kw INVERTER DRIVE VFD

  • Door to door service shanghai, China
  • Mar 25th
1.2KW AIR-COOLED SPINDLE MOTOR CNC ENGRAVING MILLING GRIND FOUR BEARING RPM2400

1.2KW AIR-COOLED SPINDLE MOTOR CNC ENGRAVING MILLING GRIND FOUR BEARING RPM2400

  • Door to door service shanghai, China
  • Mar 25th
NICE LOT OF EXPANDING MANDRELS & ARBORS - 1/2 " - 1 1/4 " APPROX.

NICE LOT OF EXPANDING MANDRELS & ARBORS - 1/2 " - 1 1/4 " APPROX.

  • Lancaster, Pennsylvania, United States
  • Mar 27th
KO Lee expanding mandrel

KO Lee expanding mandrel

  • Vacaville, California, United States
  • Mar 28th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies