compressor wiring harness for sale, brand-new and used.

Absolute Zero Refrigeration Solutions 184 Edwards Rd

Absolute Zero Refrigeration Solutions llc 184 Edwards Rd Monticello, GA 31064

CHAMPION AIR COMPRESSOR HR10-12 3PHASE 10HP COMPRESSOR WAS PURCHASED FROM AUTO REPAIR SHOP CLOSING DOORS 2 YEARS AGO. HAS BEEN TESTED THE ELECTRIC MOTOR IS PERFECT CONDITION ALONG WITH THE PUMP. TANK IS CLEAN AND SEALED TIGHT WITH NO LEAKS OR RUST.

UP FOR AUCTION IS A COPELAND SCROLL COMPRESSOR MODEL ZR54K5-PFV-800. CLICK ON THIS LINK FOR ALL OF THE SPECS. www.emersonclimate.com/Documents/Products/Compressors/residential_scroll/2009ECT-94_R3.pdf 53500 BTU 208-230/1/50-60 R-22 Rheem/Ruud/Copeland Scroll Compressor ZR54K5-PFV-800 ***This compressor includes a molded plug wiring harness.

New Copeland Compressor Plug with Harness in unopened plastic bag. Part Number 526-0060-24 Wire colors are black, light grey, & dark grey. Wire Colors Do Not Matter.

Copeland Molded Plug 45-100834-80 This wiring harness is for use with Copeland compressors with molded plug connections. 45-100834-80 is the universal replacement for the majority of residential applications Technical Data: Conductor Size - Run/Common/Start (AWG): 10/10/10 Conductor Length (in.): 60 Compressor Termination Pattern: 0.530 in. pin circle diameter Control Terminations: 1/4 in.

Copeland Molded Plug (JEZ Models) 45-100834-08 This wiring harness is for use with Copeland compressors with molded plug connections. It is a universal replacement for the -JEZ condensing units and heat pumps. Technical Data: Conductor Size - Run/Common/Start (AWG): 10/10/10 Conductor Length (in.): 35 Compressor Termination Pattern: 0.530 in.

New in sealed plastic bag. Copeland compressor molded plug for scroll compressor. Molded Plug or Wiring Harness as I Know it to be called.

CHAMPION AIR COMPRESSOR HR10-12 3PHASE 10HP HR10-12 FEATURES AND BENEFITS (1) Motor starter mounted & wired -----saves on electrial wiring cost (2) Low oil monitor mounted & wired-----stops motor when oil level is low (3) Auto tank drain mounted & piped -----removes water from tank automatically (4) Isolators p

Selling off some various vacuum pumps / compressor that were pulled from obsolete equipment over the last year so watch our upcoming sales for other units. Will list as we have time. All units were tested as running and we have listed the vacuum draw of each.

New Copeland Compressor Plug with Harness in unopened plastic bag. Part Number 15M3501 I have 2 sets of these. One is still in plastic the other came out of the plastic.

This sale is for the Baldor Model M97119 Motor for the Custom-Aire Air Compressor brand dental Air Compressor. It is new and comes with tall the connections to install it, it has three capasitors, the wiring harness, the air line to connect to the tank, and the mounting bracket. It has been checked over by a service technician and has been tested in our production shop.

Kohler Generator removed from an RV motor home. Generator is complete and as seen in the pictures it starts right up, includes the complete guard for the exterior. and is ready to be mou

110V UNIT. WIRING COMPLETE OTHER THEN THICKNESS SENSOR. FRAMEWORK AND ALL COMPONETS THAT ARE THE ELECTRICAL SYSTEM OTHER THEN CONTROL BOARD.

Restored with all new wiring harness with surge protection, new fan motors new thermostat new shroud this compressor runs very smooth and quiet. The thermostat will be mounted and connected to red wires also has wires for light or whatever else you need power for. This will slide right into you vendo 56.

Restored refrigeration deck with all new wiring harness with surge protection, new fan motors new thermostat new shroud this compressor runs very smooth and quiet. also has wires for light or whatever else you need power for. This will slide right into you vendo 56.

I have a full size Soda Machine Manufacturer: Dixie Narco Condition: Good, 8 button dispenser Repairs preformed: New handles and lock, upgraded interior lighting and bulbs, New latch, upgraded bill validator Coin mechanism with wiring harness. I have all receipts for parts listed above. Compressor works fine with quiet fan.

Here is a complete compressor for a Heidelberg QMDI. I believe that it is for the powder unit. I had it in my parts room as a spare.