+ Post new Ad
CONCENTRIC Spring Loaded Live Center - TAPER: 3 MT, US $296.99 – Picture 0
CONCENTRIC Spring Loaded Live Center - TAPER: 3 MT, US $296.99 – Picture 0

Concentric Spring Loaded Live Center - Taper: 3 Mt

US $296.99

  • Flushing, New York, United States
  • Jan 30th
Open on mobile:
QR code
CONCENTRIC Spring Loaded Live Center - TAPER: 3 MT Super Accurate And Spring Loaded Applications Automatic thrust adjustment: spring loaded spindle compensates for work expansion or contraction, maintains constant tailstock thrust and eliminates jamming Features Grease hole. Tampered steel spring. Benefits Low profile design gives less overhang, greater load capacity and increased rigidity. Smaller turning radius allows higher RPM's lower bearing speeds. Needle bearings distribute stress for up to 6,800 lbs. radial load capacity, extend life 2 to 3 times that of conventional live centers and provide turning accuracy up to 0.0001". Taper 3 MT Weight Of Workpiece 1,850 lbs. Accuracy Inch Up to 0.0001". Morse Taper 3 Point Angle 60° Radial Load 1,850 lbs. Shank 3 MT Spindle Diameter 0.558" TIR Repeatability ±0.0001" Weight 1 lbs.
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Manufacturer Part Number 17103
Part Brand CONCENTRIC

Directions

Similar products from Live Centers

Small Tail Stock (Inv.29958)

Small Tail Stock (Inv.29958)

  • Portland, Connecticut, United States
  • Jan 30th
NEW MORSE TAPER MT 5 LATHE LIVE BULL NOSE PIPE CENTER

NEW MORSE TAPER MT 5 LATHE LIVE BULL NOSE PIPE CENTER

  • Harvard, Massachusetts, United States
  • Jan 30th
Sherline 1191 Live Center

Sherline 1191 Live Center

  • United States
  • Jan 30th
CENTER ADAPTERS FOR SPINDLES OF LARGE LATHES AM/STD TAPERS

CENTER ADAPTERS FOR SPINDLES OF LARGE LATHES AM/STD TAPERS

  • Plantsville, Connecticut, United States
  • Jan 30th
center adapters for large lathe spindles lot buy the ones you need

center adapters for large lathe spindles lot buy the ones you need

  • Plantsville, Connecticut, United States
  • Jan 30th
Lathe -Heavy Duty Dead Center w/ # 2 MT / DC 173

Lathe -Heavy Duty Dead Center w/ # 2 MT / DC 173

  • Seffner, Florida, United States
  • Jan 30th
Ideal Live Center 47-073B Morse Taper 3

Ideal Live Center 47-073B Morse Taper 3

  • Crown Point, Indiana, United States
  • Jan 30th
Lathe 4 - # 3 MT Reducer / DC 186

Lathe 4 - # 3 MT Reducer / DC 186

  • Seffner, Florida, United States
  • Jan 30th
SHARS 4MT Medium Duty Live Center Set MT4 NEW

SHARS 4MT Medium Duty Live Center Set MT4 NEW

  • Saint Charles, Illinois, United States
  • Jan 30th
Royal Products Super Dual Live Center 4Mt

Royal Products Super Dual Live Center 4Mt

  • Piedmont, South Carolina, United States
  • Jan 30th
USED TAPER SHANK #4MT LATHE DEAD CENTER (1.250"-Point Diameter)

USED TAPER SHANK #4MT LATHE DEAD CENTER (1.250"-Point Diameter)

  • Fairfield, Iowa, United States
  • Jan 30th
NEW MEDA PRECISION LATHE LIVE CENTER #5MT (1930005)

NEW MEDA PRECISION LATHE LIVE CENTER #5MT (1930005)

  • Fairfield, Iowa, United States
  • Jan 30th
Doall Live Center Super Tri Bearing Live Center 5Mt

Doall Live Center Super Tri Bearing Live Center 5Mt

  • Piedmont, South Carolina, United States
  • Jan 30th
SHARS 2MT Carbide Morse Taper Solid Dead Center NEW

SHARS 2MT Carbide Morse Taper Solid Dead Center NEW

  • Saint Charles, Illinois, United States
  • Jan 30th
SHARS 5MT Steel Morse Taper Solid Dead Center NEW

SHARS 5MT Steel Morse Taper Solid Dead Center NEW

  • Saint Charles, Illinois, United States
  • Jan 30th
NEW MT3 LATHE DEAD CENTER MORSE TAPER #3 LATHE CENTER

NEW MT3 LATHE DEAD CENTER MORSE TAPER #3 LATHE CENTER

  • Ventura, California, United States
  • Jan 30th
USED RITEN LATHE DEAD CENTER #4MT (1.246" Point Diameter)

USED RITEN LATHE DEAD CENTER #4MT (1.246" Point Diameter)

  • Fairfield, Iowa, United States
  • Jan 30th
USED CARBIDE TIPPED TAPER SHANK LATHE DEAD CENTER #3MT (.896" Point Diameter)

USED CARBIDE TIPPED TAPER SHANK LATHE DEAD CENTER #3MT (.896" Point Diameter)

  • Fairfield, Iowa, United States
  • Jan 30th
Model 5698-0402 6.50"L X 1.0615"OD HSS M-2 Center

Model 5698-0402 6.50"L X 1.0615"OD HSS M-2 Center

  • Peoria, Illinois, United States
  • Jan 30th
#5 Morse Taper Live Center

#5 Morse Taper Live Center

  • Johnson City, New York, United States
  • Jan 30th

People who viewed this item also vieved

8 Piece 5C Collet Set and Stand: NEW

8 Piece 5C Collet Set and Stand: NEW

  • Wayne, Pennsylvania, United States
  • Mar 28th
~MACHINIST LATHE MILL 2 Sets of Jacobs Rubber Flex Collets

~MACHINIST LATHE MILL 2 Sets of Jacobs Rubber Flex Collets

  • Cincinnati, Ohio, United States
  • Mar 28th
(10) Kennametal Erickson TG75 Collets, Used Assorted Sizes

(10) Kennametal Erickson TG75 Collets, Used Assorted Sizes

  • West Babylon, New York, United States
  • Mar 28th
STEEL HORIZONTAL CNC TOMBSTONE T-TYPE

STEEL HORIZONTAL CNC TOMBSTONE T-TYPE

  • Minneapolis, Minnesota, United States
  • May 16th
Vintage 1950's N.A. Woodworth Co. "Cone-Lok" Pump Jig - Works, Good Condition

Vintage 1950's N.A. Woodworth Co. "Cone-Lok" Pump Jig - Works, Good Condition

  • Claremont, California, United States
  • May 17th
Starrett No191 “Little Giant” Jack Screw Complete Set

Starrett No191 “Little Giant” Jack Screw Complete Set

  • Lykobrisi, default, Greece
  • May 17th
set of 2 J & S adjustable serrated T slot hold down clamps

set of 2 J & S adjustable serrated T slot hold down clamps

  • Dow, Illinois, United States
  • May 25th
MACHINIST STETHOSCOPE MACHINE SHOP TOOL, MECHANICS TOOL/PLUMBING/NOISE DETECTOR

MACHINIST STETHOSCOPE MACHINE SHOP TOOL, MECHANICS TOOL/PLUMBING/NOISE DETECTOR

  • Great Meadows, New Jersey, United States
  • May 25th
Model Expo Set Of 3 Miniature F-clamps Aluminum Item # MT1011 2", 3" & 4-1/2"

Model Expo Set Of 3 Miniature F-clamps Aluminum Item # MT1011 2", 3" & 4-1/2"

  • Athens, Georgia, United States
  • May 26th
GENUINE JACOBS C80J keyless drill chuck collar USA knurled clamping parts C80-J

GENUINE JACOBS C80J keyless drill chuck collar USA knurled clamping parts C80-J

  • San Marcos, California, United States
  • Jun 8th
Big CNC lathe power chuck, 15", 3-jaw

Big CNC lathe power chuck, 15", 3-jaw

  • Independence, Oregon, United States
  • Jun 9th
THREE NEW OD HARD SOLID 3" JAWS FOR METAL LATHE CHUCK

THREE NEW OD HARD SOLID 3" JAWS FOR METAL LATHE CHUCK

  • Kittanning, Pennsylvania, United States
  • Jun 9th
Kirt Vice 5 Inch With Swivel Base

Kirt Vice 5 Inch With Swivel Base

  • Roselle, Illinois, United States
  • Jun 11th
Proxxon 24260 Precision Machine Vise for MF 70 (AMAG3)

Proxxon 24260 Precision Machine Vise for MF 70 (AMAG3)

  • Orlando, Florida, United States
  • Jun 12th
WILTON 5" HEAVY DUTY BENCH VISE WITH ANVIL AND PIPE JAWS FREE SHIPPING

WILTON 5" HEAVY DUTY BENCH VISE WITH ANVIL AND PIPE JAWS FREE SHIPPING

  • Cicero, New York, United States
  • Jun 13th
72"x38" Butcher Block/Steel Table Work Bench W/Outlets

72"x38" Butcher Block/Steel Table Work Bench W/Outlets

  • Middlebury, Indiana, United States
  • May 31st
LNS Quick Load Magazine style Bar Feeder

LNS Quick Load Magazine style Bar Feeder

  • Cincinnati, Ohio, United States
  • Jun 1st
1 Cleco Wedgelock Fasteners Unknown Size

1 Cleco Wedgelock Fasteners Unknown Size

  • Athens, Georgia, United States
  • Jun 1st
PRODUCTO 42" NC 4TH & 5TH AXIS ROTARY /TILT TABLE MODEL 0140 FOR LUCAS, G&L ETC

PRODUCTO 42" NC 4TH & 5TH AXIS ROTARY /TILT TABLE MODEL 0140 FOR LUCAS, G&L ETC

  • Fountain Valley, California, United States
  • Jun 4th
Parker Bayside Linear Stage M075A5131X1 Lead Screw .1875" Input Shaft NEW

Parker Bayside Linear Stage M075A5131X1 Lead Screw .1875" Input Shaft NEW

  • Petaluma, California, United States
  • Jun 4th
Parker Bayside Stealth Gear Reduction PX23-005 LB 5:1 Ratio .375" Shaft NEW

Parker Bayside Stealth Gear Reduction PX23-005 LB 5:1 Ratio .375" Shaft NEW

  • Petaluma, California, United States
  • Jun 4th
SPi Precision Parallel Set 8 Pair 1/2" x 6" x 7/8" - 1-3/4" 52-58 HRC 13-197-9 i

SPi Precision Parallel Set 8 Pair 1/2" x 6" x 7/8" - 1-3/4" 52-58 HRC 13-197-9 i

  • Saint Louis, Missouri, United States
  • Jun 5th
LOT OF SMALL SIZED SINE BARS

LOT OF SMALL SIZED SINE BARS

  • Baldwinville, Massachusetts, United States
  • Jun 5th
POMEROY V BLOCK VINTAGE TOOLMAKER

POMEROY V BLOCK VINTAGE TOOLMAKER

  • Baldwinville, Massachusetts, United States
  • Jun 5th
5C COLLET INDEXER HORIZONTAL-VERTICAL W/10 MISC 5C COLLETS SOUTHBEND, HARDINGE

5C COLLET INDEXER HORIZONTAL-VERTICAL W/10 MISC 5C COLLETS SOUTHBEND, HARDINGE

  • Highland, New York, United States
  • Jun 9th
Erickson 1025743-CV50TG100300 CAT50 5/64" to 1" Collet Chuck

Erickson 1025743-CV50TG100300 CAT50 5/64" to 1" Collet Chuck

  • Venice, Florida, United States
  • Jun 9th
Jacobs Chuck 9758 Rubber Flex Die Grinder Collet 11/64"-1/4" Capacity 15/32" C

Jacobs Chuck 9758 Rubber Flex Die Grinder Collet 11/64"-1/4" Capacity 15/32" C

  • US, United States
  • Jun 9th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies