+ Post new Ad
Concord Blades WCB1000T080HP 10-Inch 80 Teeth TCT Hard & Soft Wood Saw Blade, US $260 – Picture 0
Concord Blades WCB1000T080HP 10-Inch 80 Teeth TCT Hard & Soft Wood Saw Blade, US $260 – Picture 0

Concord Blades Wcb1000t080hp 10-inch 80 Teeth Tct Hard & Soft Wood Saw Blade

US $260

  • Westfield, Indiana, United States
  • Jun 16th
Open on mobile:
QR code
Up for sale is a Concord 10" 80 Teeth GP TCT Wood Saw Blade is in its original factory box.  Store Return New/ Used. This Concord 10" 80 Teeth GP TCT Wood Saw Blade is in its original factory box.  It is a store return.  It has been used but it’s in very good condition, especially the teeth, see photos of teeth to see what I mean. We, CharliesProducts2011 sell new products, store returns, shelf pulls and sometimes used products.  At times some items, mostly the boxes may show a little wear and tear, or boxes may have major retail store stickers on them and if there are any obvious defects we always strive to point them out in written detail.  We only ship to the lower 48 United States of America, and many other Nations around the world on selected items, however we are sorry because we do not ship to Alaska and Hawaii.  Thank you for checking out our other fine products to see if we can supply you with anything else you may need now or in the future. Product Features, Specifics and other Information are as follows: Professional quality, construction grade for ripping & cross cutting of thick hardwoods up to 3 1/2" thick and soft woods up to 1" thick For use on Miter Saws, Circular Saws, Table Saws, Hand Saws and Chop Saws. RPM up to 5,500 Ideal for cutting Hard Wood, Soft Wood, Exotic Wood and Abrasive Wood. Thin kerf allows a smooth finish w/ minimal waste. Lower hook angle improves the surface quality of the cut, increases the feed pressure required. 2.6 mm thin kerf design, ATB Grind & 15 Degree hook angle. This wood cutting carbide saw blade is excellent for general purpose ripping, crosscutting and finishing of various wood materials and products. Thin kerf allows a smooth finish with minimal material waste. Excellent for use in cutting softwoods, hardwoods, plywood, decking, and wood composites. ATB grind 2.6mm kerf 15 degree hook angle 5/8" arbor

Directions

Similar products from Blades, Saw Blades & Cutters

Task Tools T21929 T-Shank Tungsten Carbide Grit Blade for Scroll Cuts in Tile,

Task Tools T21929 T-Shank Tungsten Carbide Grit Blade for Scroll Cuts in Tile,

  • USA, United States
  • Jun 16th
Task Tools T22211-5 5-Pack of Bi-Metal Demolition Reciprocating Saw Blades for

Task Tools T22211-5 5-Pack of Bi-Metal Demolition Reciprocating Saw Blades for

  • USA, United States
  • Jun 16th
Task Tools T22210-5 5-Pack of Bi-Metal Demolition Reciprocating Saw Blades for

Task Tools T22210-5 5-Pack of Bi-Metal Demolition Reciprocating Saw Blades for

  • USA, United States
  • Jun 16th
Task Tools T23206C Heavy Duty Bi-Metal Demolition Reciprocating Saw Blade for

Task Tools T23206C Heavy Duty Bi-Metal Demolition Reciprocating Saw Blade for

  • USA, United States
  • Jun 16th
Task Tools T21820 Tungsten Carbide Reciprocating Saw Blade for Iron, Plastic,

Task Tools T21820 Tungsten Carbide Reciprocating Saw Blade for Iron, Plastic,

  • USA, United States
  • Jun 16th
Diamond Products Core Cut 20887 12-Inch by 0.110 by 1-Inch Delux Cut Dry or Wet

Diamond Products Core Cut 20887 12-Inch by 0.110 by 1-Inch Delux Cut Dry or Wet

  • USA, United States
  • Jun 16th
Diamond Products Core Cut 20888 14-Inch by 0.125 by 1-Inch Delux Cut Dry or Wet

Diamond Products Core Cut 20888 14-Inch by 0.125 by 1-Inch Delux Cut Dry or Wet

  • USA, United States
  • Jun 16th
Task Tools 31232B 12-Inch by 7/64-Inch Metal Chop Saw Cutting Wheel, 1-Inch

Task Tools 31232B 12-Inch by 7/64-Inch Metal Chop Saw Cutting Wheel, 1-Inch

  • USA, United States
  • Jun 16th
Wood Mizer Bandsaw 13'2" 1.125 x 038 x 5/8 sawmill band saw mill resaw LT 15

Wood Mizer Bandsaw 13'2" 1.125 x 038 x 5/8 sawmill band saw mill resaw LT 15

  • Ellettsville, Indiana, United States
  • Jun 16th
SGS Tool Company 13150 SE-41 Carbide Bur 1/8 Diameter 1/8 Shank Diameter

SGS Tool Company 13150 SE-41 Carbide Bur 1/8 Diameter 1/8 Shank Diameter

  • USA, United States
  • Jun 16th
Avanti PS0914AGP10 9-Inch 8/14 TPI Wood and Metal Cutting Reciprocating Saw

Avanti PS0914AGP10 9-Inch 8/14 TPI Wood and Metal Cutting Reciprocating Saw

  • USA, United States
  • Jun 16th
Bosch DB741SD 7-Inch Segmented Rim Diamond Blade (with Dko)

Bosch DB741SD 7-Inch Segmented Rim Diamond Blade (with Dko)

  • USA, United States
  • Jun 16th
NEW Freud Professional Dado BLADE SET, 8 Inch Titanium Table SAW BLADES, SD208

NEW Freud Professional Dado BLADE SET, 8 Inch Titanium Table SAW BLADES, SD208

  • Mahwah, New Jersey, United States
  • Jun 16th
Felder HW Adjustable Slotting Cutter

Felder HW Adjustable Slotting Cutter

  • Hattiesburg, Mississippi, United States
  • Jun 16th
Starrett Intenss Pro Band Saw Blade, Bimetal, Intenss Tooth, Raker

Starrett Intenss Pro Band Saw Blade, Bimetal, Intenss Tooth, Raker

  • Spring Hill, Tennessee, United States
  • Jun 16th
BLADE,7.25" 14T CARBIDE NAIL

BLADE,7.25" 14T CARBIDE NAIL

  • Mountain View, Arkansas, United States
  • Jun 16th
Concord Blades ACB0725T060HP 7-1/4-Inch 60 Teeth TCT Non-Ferrous Metal Saw New

Concord Blades ACB0725T060HP 7-1/4-Inch 60 Teeth TCT Non-Ferrous Metal Saw New

  • US, United States
  • Jun 16th
Freud SS200 1-Inch Bore Dado Shim Set New

Freud SS200 1-Inch Bore Dado Shim Set New

  • US, United States
  • Jun 16th
Concord Blades ACB1000T080HP 10-Inch 80 Teeth TCT Non-Ferrous Metal Saw Blade

Concord Blades ACB1000T080HP 10-Inch 80 Teeth TCT Non-Ferrous Metal Saw Blade

  • US, United States
  • Jun 16th
Concord Blades DADO800HP DADO 8-Inch 24 Teeth Set

Concord Blades DADO800HP DADO 8-Inch 24 Teeth Set

  • USA, United States
  • Jun 16th

People who viewed this item also vieved

CAL-HAWK 3 PIECE WOOD CHISEL SET BZC03P

CAL-HAWK 3 PIECE WOOD CHISEL SET BZC03P

  • Tacoma, Washington, United States
  • Jan 30th
Narex (Made in Czech Republic) 500 gram Brass Carving Mallet w/ Hornbeam Handle

Narex (Made in Czech Republic) 500 gram Brass Carving Mallet w/ Hornbeam Handle

  • Columbia, Missouri, United States
  • Jan 30th
New Narex (Made in Czech Republic) Leather 16 Pocket Tool Roll for Carving Tools

New Narex (Made in Czech Republic) Leather 16 Pocket Tool Roll for Carving Tools

  • Columbia, Missouri, United States
  • Jan 30th
Vertical Toggle Clamp 13009 Holding Capacity 35Kg Flange Base

Vertical Toggle Clamp 13009 Holding Capacity 35Kg Flange Base

  • Taizhou, ???, China
  • Jan 30th
Horizontal pushing fast clamping tools GH301AM Capacity 45Kg

Horizontal pushing fast clamping tools GH301AM Capacity 45Kg

  • Taizhou, ???, China
  • Jan 30th
Push-In Quick clamp 80325 Holding Capacity 340Kg MAX

Push-In Quick clamp 80325 Holding Capacity 340Kg MAX

  • Taizhou, ???, China
  • Jan 30th
Steel Drilling Hole Saw Tool for Metal Aluminum Sheet Alloy 23mm A080 GAU

Steel Drilling Hole Saw Tool for Metal Aluminum Sheet Alloy 23mm A080 GAU

  • Hong Kong, China
  • Jan 30th
HSS Steel Drilling Hole Saw Tool for Metal Aluminum Sheet Alloy 22mm A079 GAU

HSS Steel Drilling Hole Saw Tool for Metal Aluminum Sheet Alloy 22mm A079 GAU

  • Hong Kong, China
  • Jan 30th
Steel Drilling Hole Saw Tool for Metal Aluminum Sheet Alloy 19mm A076 GAU

Steel Drilling Hole Saw Tool for Metal Aluminum Sheet Alloy 19mm A076 GAU

  • Hong Kong, China
  • Jan 30th
Curly Mineral Maple Veneer. 9.5 x 128, 3 Sheets.

Curly Mineral Maple Veneer. 9.5 x 128, 3 Sheets.

  • High Point, North Carolina, United States
  • Jan 30th
Fiddleback Anegre Veneer. 9 x 36.5, 30 Sheets.

Fiddleback Anegre Veneer. 9 x 36.5, 30 Sheets.

  • High Point, North Carolina, United States
  • Jan 30th
Block Mottled Anegre Veneer. 7.5 x 64.5, 6 Sheets.

Block Mottled Anegre Veneer. 7.5 x 64.5, 6 Sheets.

  • High Point, North Carolina, United States
  • Jan 30th
CRAFTSMAN 6" Belt & Disc Sander 113.22541 Owner's & Parts Manual 1042

CRAFTSMAN 6" Belt & Disc Sander 113.22541 Owner's & Parts Manual 1042

  • Nixa, Missouri, United States
  • Jan 30th
CRAFTSMAN 12" Band Saws 113.24810,113.248320,113.248440,& 113.248510 Manual 1051

CRAFTSMAN 12" Band Saws 113.24810,113.248320,113.248440,& 113.248510 Manual 1051

  • Nixa, Missouri, United States
  • Jan 30th
CRAFTSMAN 10" Radial Arm Saw 113.23100 Owners Instructions & Parts Manual 1052

CRAFTSMAN 10" Radial Arm Saw 113.23100 Owners Instructions & Parts Manual 1052

  • Nixa, Missouri, United States
  • Jan 30th
10mm X 1.5 to 5/8 X 11 Power Tool Adapapter

10mm X 1.5 to 5/8 X 11 Power Tool Adapapter

  • Sturgis, Michigan, United States
  • Jan 30th
10mm X 1.25 to 5/8 X 11 Power Tool Adapapter

10mm X 1.25 to 5/8 X 11 Power Tool Adapapter

  • Sturgis, Michigan, United States
  • Jan 30th
Magn Mini Planer Pal for 10"-12" planer with 1 7/8"-2 1/8" dia cutterheads/W1226

Magn Mini Planer Pal for 10"-12" planer with 1 7/8"-2 1/8" dia cutterheads/W1226

  • Sturgis, Michigan, United States
  • Jan 30th
3.5 bore 3/32 ct 7 dia carbide tipped 358 Shaper cutter rabbet dado looks good

3.5 bore 3/32 ct 7 dia carbide tipped 358 Shaper cutter rabbet dado looks good

  • Greenville, South Carolina, United States
  • Jan 30th
3.5 bore 3/8 ct 7.25 dia carbide tipped 357 Shaper cutter rabbet dado looks good

3.5 bore 3/8 ct 7.25 dia carbide tipped 357 Shaper cutter rabbet dado looks good

  • Greenville, South Carolina, United States
  • Jan 30th
3.5 bore 5/16 ct 6.25 dia carbide tipped 356 Shaper cutter rabbet dado needs wrk

3.5 bore 5/16 ct 6.25 dia carbide tipped 356 Shaper cutter rabbet dado needs wrk

  • Greenville, South Carolina, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies