+ Post new Ad
Copper Tungsten Alloy (Elkonite) Rod 1/4 in Dia x 8" Long - EDM Electrode, US $25.99 – Picture 0
Copper Tungsten Alloy (Elkonite) Rod 1/4 in Dia x 8" Long - EDM Electrode, US $25.99 – Picture 1
Copper Tungsten Alloy (Elkonite) Rod 1/4 in Dia x 8" Long - EDM Electrode, US $25.99 – Picture 0
Copper Tungsten Alloy (Elkonite) Rod 1/4 in Dia x 8" Long - EDM Electrode, US $25.99 – Picture 1

Copper Tungsten Alloy (elkonite) Rod 1/4 In Dia X 8" Long - Edm Electrode

US $25.99

  • San Tan Valley, Arizona, United States
  • Jan 30th
Open on mobile:
QR code
Available for your review and purchase one (1) factory finished ground and polished 8 inch long , 1/4 inch round copper tungsten (Elkonite) alloy rod For EDM (Electric Discharge Machining) ,  Electrical Resistance Welding and other commercial / industrial applications  W70/30 alloy with Copper 30% plus or minus 2% Less than 0.5% impurity Precision Ground - conforms to applicable AWS specs Highly conductive - Conductance IACS% 42 Hardness:  greater than or equal to HB175 Density 13.8g/cm^3 Free standard shipping in the USA / Expedited Available Quantity discounts available  General guidelines before you finalize the purchase: Our goal is your 100% satisfaction before and after purchase. Please contact us first by EMAIL so we can make your buying experience a positive one. The listing usually has all the information available to make it as descriptive as possible - your suggestions & comments to revise is always welcome Errors do occur though we do our best to avoid them - please contact us first using contact the seller /other reason (do not check 'item not as described' ) We ask that you please do not file a case - it is easier and less time consuming if we hear from your first by email. Returns are accepted for full refund within 14 days after receipt date - Must be in original shipped condition - Buyer pays shipping If the return is due to our error in listing or we shipped the wrong item, we will try to compensate you for return shipping. Please contact us to work it out. For orders shipped Free, actual outbound shipping costs will be deducted from the refund issued for domestic US returns For Intl Shipments, outbound shipping cost is not refundable - we will do all in our control to resolve the issue to earn your trust

Directions

Similar products from Metals & Fusions

BRASS BAR STOCK 3/8 inch thick by 5.5 inch by 4 knife making Machining craft (D)

BRASS BAR STOCK 3/8 inch thick by 5.5 inch by 4 knife making Machining craft (D)

  • Rhinelander, Wisconsin, United States
  • Jan 30th
Smelter pit clean out! COPPER, SILVER, Aluminum, Gold, brass ect

Smelter pit clean out! COPPER, SILVER, Aluminum, Gold, brass ect

  • Chesapeake, Virginia, United States
  • Jan 30th
304 Stainless Steel Bar,Rod Precision ground .500 x 4 -5/8"

304 Stainless Steel Bar,Rod Precision ground .500 x 4 -5/8"

  • Oxford, Connecticut, United States
  • Jan 30th
Precision Ground 316 Stainless Steel Round Bar (.622/.623) 5/8" x 26"

Precision Ground 316 Stainless Steel Round Bar (.622/.623) 5/8" x 26"

  • Oxford, Connecticut, United States
  • Jan 30th
MIC- 6 CAST TOOLING ALUMINUM PLATE 12pcs. x 1/4" x 5" x 5"

MIC- 6 CAST TOOLING ALUMINUM PLATE 12pcs. x 1/4" x 5" x 5"

  • Philadelphia, Pennsylvania, United States
  • Jan 30th
1 pc - 1.750" x 7.75" x 11" 6061 T651 Aluminum Alcoa Plate

1 pc - 1.750" x 7.75" x 11" 6061 T651 Aluminum Alcoa Plate

  • Philadelphia, Pennsylvania, United States
  • Jan 30th
GOLD US BANKNOTE SET- $5 $10 $20 $ 50 $100 99.999 PURE MINT DOLLAR BILL 24K nnfo

GOLD US BANKNOTE SET- $5 $10 $20 $ 50 $100 99.999 PURE MINT DOLLAR BILL 24K nnfo

  • Dallas, Texas, United States
  • Jan 30th
Vintage US Steel Little Wonder pocket guide bends in steel Pittsburgh 1958

Vintage US Steel Little Wonder pocket guide bends in steel Pittsburgh 1958

  • Dunedin, Florida, United States
  • Jan 30th
Aluminum bar 2024-T3 3/4" x 2 1/2" x 24"

Aluminum bar 2024-T3 3/4" x 2 1/2" x 24"

  • Cocoa Beach, Florida, United States
  • Jan 30th
Vintage Rare Abraham Lincoln Brass/Bronze Bust on Oval Wood Frames-Wired 15.5x10

Vintage Rare Abraham Lincoln Brass/Bronze Bust on Oval Wood Frames-Wired 15.5x10

  • Ocala, Florida, United States
  • Jan 30th
4 x 8 Diamond Plate 8 Sheets Metal Metals Wall Floor Star Strong Steel Aluminum

4 x 8 Diamond Plate 8 Sheets Metal Metals Wall Floor Star Strong Steel Aluminum

  • United States
  • Jan 30th
(5) AZ31B MAGNESIUM BAR .497"x1.28"x3" FIRE STARTER SMALL SIZE SOLID BAR NEW USA

(5) AZ31B MAGNESIUM BAR .497"x1.28"x3" FIRE STARTER SMALL SIZE SOLID BAR NEW USA

  • Brewer, Maine, United States
  • Jan 30th
4 Pieces of Aluminum Sheet Metal 6"x9" .020" Thick (24 Gauge) Craft/Jewelry+

4 Pieces of Aluminum Sheet Metal 6"x9" .020" Thick (24 Gauge) Craft/Jewelry+

  • Delta, Pennsylvania, United States
  • Jan 30th
TI 6AL-4V Alloy TITANIUM ROUND BAR Stock 2.75" x 48" (55) 1.50" x 36" (19) Certs

TI 6AL-4V Alloy TITANIUM ROUND BAR Stock 2.75" x 48" (55) 1.50" x 36" (19) Certs

  • Herriman, Utah, United States
  • Jan 30th
4' x 10' Black Diamond Plate Sheet

4' x 10' Black Diamond Plate Sheet

  • Golden, Colorado, United States
  • Jan 30th
4' x 10' Aluminum Diamond Plate Sheet

4' x 10' Aluminum Diamond Plate Sheet

  • Golden, Colorado, United States
  • Jan 30th
BERYLLIUM COPPER BECu2 1.126" Dia. round bar stock endcut approx.4.5" long 1pc.

BERYLLIUM COPPER BECu2 1.126" Dia. round bar stock endcut approx.4.5" long 1pc.

  • Hawthorne, New Jersey, United States
  • Jan 30th
BERYLLIUM COPPER BECu2 1.126" Dia. round bar stock endcut approx.8.5" long2pcs.

BERYLLIUM COPPER BECu2 1.126" Dia. round bar stock endcut approx.8.5" long2pcs.

  • Hawthorne, New Jersey, United States
  • Jan 30th
DELRIN ROD 5/8" (.627 dia) WHITE round rod stock end cuts approx.16" long 2 pcs.

DELRIN ROD 5/8" (.627 dia) WHITE round rod stock end cuts approx.16" long 2 pcs.

  • Hawthorne, New Jersey, United States
  • Jan 30th
TITANIUM BIG Roll of Foil 31 inch. thickness 0,07mm sheet Plate TITANE

TITANIUM BIG Roll of Foil 31 inch. thickness 0,07mm sheet Plate TITANE

  • Borda, Slovakia
  • Jan 30th

People who viewed this item also vieved

*OFFER* _ 1997 Clausing Colchester Storm 80 CNC Lathe / Turning Center

*OFFER* _ 1997 Clausing Colchester Storm 80 CNC Lathe / Turning Center

  • Grand Rapids, Michigan, United States
  • Jun 9th
*OFFER* _ *NEW 2012* Feeler FTC-200L CNC Lathe / Turning Center

*OFFER* _ *NEW 2012* Feeler FTC-200L CNC Lathe / Turning Center

  • Grand Rapids, Michigan, United States
  • Jun 9th
*OFFER* _ *NEW 1997* Daewoo Lynx 210A CNC Lathe / Turning Center

*OFFER* _ *NEW 1997* Daewoo Lynx 210A CNC Lathe / Turning Center

  • Grand Rapids, Michigan, United States
  • Jun 9th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies