US $14.95
“Used several times.” |
Brand | COURMATT INT'L |
End Type | Single End |
Model | CRD-3/8" |
Flutes | 3-Flute |
MPN | CRD-375-2 |
Helix Angle | 30° Helix |
Country/Region of Manufacture | United States |
Cutting Diameter | 3/8in. |
Material | Solid Carbide |
Shank | 3/8 Inch |
Coating | Uncoated |
Directions
Similar products from Solid Carbide Drill Bits
Snap On VWB800d Carbide Burr Set
7/32 High Performance Carbide Drill 140° HQS Point TiALN Coated NEW Hanita 1pc
17/64 High Performance Carbide Drill 140° HQS Point TiALN Coated NEW Hanita 1pc
13/32 3xD High Performance Carbide Drill TiALN Coated NEW Widia VariDrill™ 1pc
7.4mm High Performance Carbide Drill 140° HQS Point TiALN Coated NEW Hanita 1pc
23/64 High Performance Carbide Drill TiALN Coated 140° DP NEW Sumitomo 1pc
SCRAP AND RE-USEABLE CARBIDE 20LBS
2 sets of 50 Piece Solid Carbide Micro Drill Bit Set, Jewlrey sets
1 - NEW SGS SOLID CARBIDE GRINDING BUR - 7/32 DIA.
OSG 6 mm CARBIDE DRILL BIT, 8632600, WDO-5D, NEW
(10).0386" (0.98mm) CARBIDE DRILLS Kyocera .220" FLUTE LENGTH
Lot of 2 METAL REMOVAL Straight Flute Carbide Drills, #51, 0.067", M43521
OSG - 8636800 -8MM Extra Length COOLANT THRU CARBIDE Drill Size 8.00 (mm):
OSG - 8637000 -10MM Extra Length COOLANT THRU CARBIDE Drill Size 10.00 (mm):
XLM Solid Carbide #1 Combinded Drill & Countersink (SCCDCS1) Double End
Superion .3125 Double Margin Solid Carbide Drill BD.3125
Lot 29-Solid Carbide Drill Bits-Size #23-#39 Cutting Bits-New Old Stock-#32 Unk
Garr 8.5mm 90660 Solid Carbide 3 flute drills New
People who viewed this item also vieved
NICE LOT OF 8 HSS STRAIGHT SHANK TWIST DRILLS 27/64" TO 11/16" MORSE
new GREENFIELD 29/64" 120 Taper Length Twist Drill Bit Black Oxide 49729 USA
New 5pc #30 Wire Size Aircraft Extension Drill Bit 6" Overall Length Made in USA
New 2pc #30 Wire Size Aircraft Extension Drill Bit 6" Overall Length Made in USA
NICE LOT OF 23 SLEEVES 1MT X 1/8"
LOT OF 17 2MT DRILL SLEEVES FITS 1MT
LOT OF 11 JONES 1MT SLEEVES 1/4" AND 11/32"
LARGE WAUKESHA SPADE DRILL WITH MORSE TAPER #5 TAPER ADAPTED TO #6 3 1/2" DIA
AMEC SPADE DRILL WITH MORSE TAPER #5 ABOUT 1 7/8" DIA CUTTING METALWORKING TOOLS
DH406080 Coolant-thru Carbide Drill 8mm
(4) USA Screw Machine Length 15/32 X 2-1/8 X 3-5/8 X 15/32 Drill Bits New
CLEVELAND C15057 Screw Mach Drill,Parabolic,TiAlN,11/64
OSG 220-2031 Screw Mach Drill,Carbide,13/64,118 Deg G7515015
High Speed Steel Twist Drills sized 63 (0.94mm) (pack of 10)
High Speed Steel Twist Drills sized 62 (0.97mm) (pack of 10)
High Speed Steel Twist Drills sized 60 (1.02mm) (pack of 10)
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
Accept All Cookies