+ Post new Ad
Craftsman Commercial Hand Grinder 315. 25841, US $8500 – Picture 0
Craftsman Commercial Hand Grinder 315. 25841, US $8500 – Picture 0

Craftsman Commercial Hand Grinder 315. 25841

US $8500

  • High Point, North Carolina, United States
  • Jun 8th
Open on mobile:
QR code
Your bidding on a used grinder with 4 bits and original case.  Case is broken but still useable.  See second picture of where one hinge is off.  Last picture is it with unit inside.  I put electrical tape on it as seen in picture because there was a cut in the black rubber plastic on the wire.   The end seems a little rusty/ but overall this is all usable or and is made a lot better than the new ones.  Good luck winning this!

Directions

Similar products from Toold for Grinding Machines

MTI 85384435 Precision Slicing/Dicing Grinding Diamond Gang Arbor Assembly +Box

MTI 85384435 Precision Slicing/Dicing Grinding Diamond Gang Arbor Assembly +Box

  • Milpitas, California, United States
  • Jun 9th
D-D Work Rest Adjustable Knife Grinding Jig 6" x3" Center Sliding Support Pin

D-D Work Rest Adjustable Knife Grinding Jig 6" x3" Center Sliding Support Pin

  • North Bend, Washington, United States
  • Jun 8th
D-D Extreme Tilt Work Rest for Wilmont LB1000 Belt Grinder

D-D Extreme Tilt Work Rest for Wilmont LB1000 Belt Grinder

  • North Bend, Washington, United States
  • Jun 8th
MAGNETIC WORKHOLDING BLOCK 2-3/4" X 4-1/2" SINGLE SIDED W/ WRENCH

MAGNETIC WORKHOLDING BLOCK 2-3/4" X 4-1/2" SINGLE SIDED W/ WRENCH

  • Ellington, New York, United States
  • Jun 8th
MOORE Tool EXTENSION PLATE INTERNAL GRINDING TOOLING JIG FIXTURE *(1)

MOORE Tool EXTENSION PLATE INTERNAL GRINDING TOOLING JIG FIXTURE *(1)

  • Suffield, Connecticut, United States
  • Jun 8th
MOORE Tool EXTENSION PLATE INTERNAL GRINDING TOOLING JIG FIXTURE *(2)

MOORE Tool EXTENSION PLATE INTERNAL GRINDING TOOLING JIG FIXTURE *(2)

  • Suffield, Connecticut, United States
  • Jun 8th
MOORE Tool EXTENSION PLATE INTERNAL GRINDING TOOLING JIG FIXTURE *(3)

MOORE Tool EXTENSION PLATE INTERNAL GRINDING TOOLING JIG FIXTURE *(3)

  • Suffield, Connecticut, United States
  • Jun 8th
Darex Drill Grinder Sharpener 1/3 HP 3450 RPM

Darex Drill Grinder Sharpener 1/3 HP 3450 RPM

  • O'Fallon, Missouri, United States
  • Jun 8th
Robbins MAGNA SINE Permanent MAGNETIC FIXTURE CHUCK MODEL B5 6x6

Robbins MAGNA SINE Permanent MAGNETIC FIXTURE CHUCK MODEL B5 6x6

  • DeKalb, Illinois, United States
  • Jun 8th
Moore Dumore Jig Borer Mill Slot Grinder Attachment

Moore Dumore Jig Borer Mill Slot Grinder Attachment

  • Millstone Township, New Jersey, United States
  • Jun 8th
2 READY TOOL NO. 111 CAM ACTION GRINDER DOGS STK 7644

2 READY TOOL NO. 111 CAM ACTION GRINDER DOGS STK 7644

  • Wadley, Alabama, United States
  • Jun 8th
Weinig R 930 Rondomat Knife Profile Grinder Machine For Wood Shaper Blades

Weinig R 930 Rondomat Knife Profile Grinder Machine For Wood Shaper Blades

  • Millstadt, Illinois, United States
  • Jun 8th
10" X 24" K.O. LEE S1024P HYDRAULIC SURFACE GRINDER

10" X 24" K.O. LEE S1024P HYDRAULIC SURFACE GRINDER

  • Santa Paula, California, United States
  • Jun 8th
DUMORE TOOL POST GRINDER CAT NO. 7T-200 GRINDING SPINDLE 2" DIAMETER

DUMORE TOOL POST GRINDER CAT NO. 7T-200 GRINDING SPINDLE 2" DIAMETER

  • Oregon, Ohio, United States
  • Jun 8th
Cincinnati #2 Cutter and Grinder w/ Electrical update No.2

Cincinnati #2 Cutter and Grinder w/ Electrical update No.2

  • Findlay, Ohio, United States
  • Jun 8th
G&P MACHINERY SWING FRAME GRINDER ~ MODEL B390-5 ~ 5 HP ~ 460 V ~ 3 PH

G&P MACHINERY SWING FRAME GRINDER ~ MODEL B390-5 ~ 5 HP ~ 460 V ~ 3 PH

  • Schaumburg, Illinois, United States
  • Jun 8th
New CORDLESS POWER GRINDER

New CORDLESS POWER GRINDER

  • Myrtle, Mississippi, United States
  • Jun 8th
BALDOR 6" BENCH GRINDER 612 LEFT SIDE GUARD CASTING AND COVER

BALDOR 6" BENCH GRINDER 612 LEFT SIDE GUARD CASTING AND COVER

  • Jupiter, Florida, United States
  • Jun 8th
Standard twin wheel tool grinder machinist tools SPL 14TD 3PH 440V 5HP 14" wheel

Standard twin wheel tool grinder machinist tools SPL 14TD 3PH 440V 5HP 14" wheel

  • Connersville, Indiana, United States
  • Jun 8th
Norton Metalite R228 Benchstand Abrasive Belt, Cotton Backing, Aluminum Oxide, 2

Norton Metalite R228 Benchstand Abrasive Belt, Cotton Backing, Aluminum Oxide, 2

  • Franklin, Tennessee, United States
  • Jun 8th

People who viewed this item also vieved

GEOMETRIC 11/32-20 PROJECTED CHASERS FOR 5/16" D, DS,DSA

GEOMETRIC 11/32-20 PROJECTED CHASERS FOR 5/16" D, DS,DSA

  • Fox Lake, Illinois, United States
  • Jan 30th
GEOMETRIC .152-36 MILLED CHASERS FOR 5/16" D, DS,DSA, GROUND FROM SHARPENING

GEOMETRIC .152-36 MILLED CHASERS FOR 5/16" D, DS,DSA, GROUND FROM SHARPENING

  • Fox Lake, Illinois, United States
  • Jan 30th
GEOMETRIC .152-36 MILLED CHASERS FOR 5/16" D, DS,DSA

GEOMETRIC .152-36 MILLED CHASERS FOR 5/16" D, DS,DSA

  • Fox Lake, Illinois, United States
  • Jan 30th
NIB Helicoil 2299-12 3/4-16 Thread Insert Hand Tool

NIB Helicoil 2299-12 3/4-16 Thread Insert Hand Tool

  • Twinsburg, Ohio, United States
  • Jan 30th
4-40 X 1 1/2D (.168") Phosphorous Bronze Free Running Inserts, 1185-04BN-0168

4-40 X 1 1/2D (.168") Phosphorous Bronze Free Running Inserts, 1185-04BN-0168

  • Abingdon, Maryland, United States
  • Jan 30th
4-40 X 2D (.224") Phosphorous Bronze Screw Lock Inserts, 3585-04BN-0224

4-40 X 2D (.224") Phosphorous Bronze Screw Lock Inserts, 3585-04BN-0224

  • Abingdon, Maryland, United States
  • Jan 30th
SYSTEM 3R Conventional EDM Head ATR # 3R-7-02

SYSTEM 3R Conventional EDM Head ATR # 3R-7-02

  • Watertown, Connecticut, United States
  • Jan 30th
NEW Dual 0.013 Wire guide Wheel (2"dia.X5/16"X1/2"hole)

NEW Dual 0.013 Wire guide Wheel (2"dia.X5/16"X1/2"hole)

  • Albion, New York, United States
  • Jan 30th
NEW Dual 0.007 Wire guide Wheel (2"dia.X5/16"X1/2"hole)

NEW Dual 0.007 Wire guide Wheel (2"dia.X5/16"X1/2"hole)

  • Albion, New York, United States
  • Jan 30th
1.5" Dia. Wallace HRB-1-1/2 PIPE BENDER, Misc. Tooling

1.5" Dia. Wallace HRB-1-1/2 PIPE BENDER, Misc. Tooling

  • Harrison, New Jersey, United States
  • Jan 30th
50 Ton 10" Strk Dake 908050-4 H-FRAME HYDRAULIC PRESS, Electric over Hydraulic O

50 Ton 10" Strk Dake 908050-4 H-FRAME HYDRAULIC PRESS, Electric over Hydraulic O

  • Harrison, New Jersey, United States
  • Jan 30th
20 Ton 12" Strk Denison FH20 20H C404FSD HYDRAULIC PRESS

20 Ton 12" Strk Denison FH20 20H C404FSD HYDRAULIC PRESS

  • Harrison, New Jersey, United States
  • Jan 30th
LIGHTLY USED!! SUNNEN #KKN-444A REPLACEMENT STROKER BELT FOR HONING MACHINES

LIGHTLY USED!! SUNNEN #KKN-444A REPLACEMENT STROKER BELT FOR HONING MACHINES

  • Chino, California, United States
  • Jan 30th
NEW!! SUNNEN #MBB-820 REPLACEMENT "V" DRIVE BELT FOR HONING MACHINES

NEW!! SUNNEN #MBB-820 REPLACEMENT "V" DRIVE BELT FOR HONING MACHINES

  • Chino, California, United States
  • Jan 30th
NEW!! SUNNEN #MBB-1830A REPLACEMENT MOTOR DRIVE BELT FOR (60Hz) HONING MACHINES

NEW!! SUNNEN #MBB-1830A REPLACEMENT MOTOR DRIVE BELT FOR (60Hz) HONING MACHINES

  • Chino, California, United States
  • Jan 30th
NEW ATLAS CRAFTSMAN 9-12 SWING LATHE QUICK CHANGE TOOL POST SET+CUT-OFF BLADE

NEW ATLAS CRAFTSMAN 9-12 SWING LATHE QUICK CHANGE TOOL POST SET+CUT-OFF BLADE

  • Niles, Michigan, United States
  • Jan 30th
ATLAS CRAFTSMAN 6 INCH #3950 LATHE 560-194 SPINDLE PULLEY ASSEMBLY FINE USED

ATLAS CRAFTSMAN 6 INCH #3950 LATHE 560-194 SPINDLE PULLEY ASSEMBLY FINE USED

  • Niles, Michigan, United States
  • Jan 30th
LOGAN 10" METAL LATHE MODEL 200 CHANGE GEAR 44 MACHINIST TOOLING

LOGAN 10" METAL LATHE MODEL 200 CHANGE GEAR 44 MACHINIST TOOLING

  • Waterford, Michigan, United States
  • Jan 30th
B&S 4 X 1/4 X 1-1/4 SIDE MILLING CUTTER HSS

B&S 4 X 1/4 X 1-1/4 SIDE MILLING CUTTER HSS

  • Wadley, Alabama, United States
  • Jan 30th
STANDARD TOOL 3" x 1-3/4" x 1-1/4" BORE ROUGHING SHELL MILLING CUTTER END MILL

STANDARD TOOL 3" x 1-3/4" x 1-1/4" BORE ROUGHING SHELL MILLING CUTTER END MILL

  • Tallmadge, Ohio, United States
  • Jan 30th
Bridgeport Series 1 Boss 6/9 CNC R2E4 Milling Machine

Bridgeport Series 1 Boss 6/9 CNC R2E4 Milling Machine

  • Turtle Creek, Pennsylvania, United States
  • Jan 30th
Buffalo Universal Ironworker No. 1/2, With Tooling Package!

Buffalo Universal Ironworker No. 1/2, With Tooling Package!

  • Pawtucket, Rhode Island, United States
  • Jan 30th
Martindale Electric Etcher

Martindale Electric Etcher

  • United States
  • Jan 30th
Okamoto 12” x 24” Surface Grinder

Okamoto 12” x 24” Surface Grinder

  • Watertown, Connecticut, United States
  • Jan 30th
DELTA 10" Professional Radial Arm Saw, #33-830C (328)

DELTA 10" Professional Radial Arm Saw, #33-830C (328)

  • Odessa, Florida, United States
  • Jan 30th
ACRA Vertical (Metal) Band Saw, #KB-45; 18"; (324)

ACRA Vertical (Metal) Band Saw, #KB-45; 18"; (324)

  • Odessa, Florida, United States
  • Jan 30th
Kaltenbach automatic cold saw ( haas mazak okuma hardinge)

Kaltenbach automatic cold saw ( haas mazak okuma hardinge)

  • United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies