+ Post new Ad
CRAFTSMAN OD&ID Radius Gage 24 Pc Set w/Case Machinist/Inspection/Made in USA, US $320 – Picture 0
CRAFTSMAN OD&ID Radius Gage 24 Pc Set w/Case Machinist/Inspection/Made in USA, US $320 – Picture 0

Craftsman Od&id Radius Gage 24 Pc Set W/case Machinist/inspection/made In Usa

US $320

  • Twinsburg, Ohio, United States
  • Jun 4th
Open on mobile:
QR code
CRAFTSMAN Radius Gage Set with Case CRAFTSMAN - Made in USA Set No. 9-40952 - OD & ID Radius Gage 24 Pc Set RANGE: 1/32" to 1/2" Comes with the worn Storage Case that has been taped and is holding up well for storage and keeping these in order NOTES: The Radius Gages are in Excellent Condition. Just the Storage Case is dirty looking and worn. I pulled 2 gages out for you to see their condition up close. Also a vies of the previous owner's initials is scribed on the back of the gages. Also there is a moth ball odor on these from storage is all. Its not real strong and has worn down some over time. See photos at the top of this page for more details Shipping is estimated at under a pound. Will be shipped First Class unless you choose otherwise. NO INTERNATIONAL SHIPPING!

Directions

Similar products from Multidetectors & Inspection Gauges

S80X4.0 7e Thread Ring Gages Go PD 76.905mm NOGOPD 76.605mm Thread check Inc

S80X4.0 7e Thread Ring Gages Go PD 76.905mm NOGOPD 76.605mm Thread check Inc

  • Columbia, South Carolina, United States
  • Jun 4th
NICE! .960-14 NGO THREAD PLUG GAGE GO NO GO .960 P.D.'S = .9136 & .9100 TOOL

NICE! .960-14 NGO THREAD PLUG GAGE GO NO GO .960 P.D.'S = .9136 & .9100 TOOL

  • Hurdle Mills, North Carolina, United States
  • Jun 4th
Thredco 5/16-24 UNF 3B Thread Plug Gage Go No Go

Thredco 5/16-24 UNF 3B Thread Plug Gage Go No Go

  • Hurdle Mills, North Carolina, United States
  • Jun 4th
Thread Ring Gage 10-24 UNC-2A Go .and No Go

Thread Ring Gage 10-24 UNC-2A Go .and No Go

  • Hurdle Mills, North Carolina, United States
  • Jun 4th
DoAll 1" - 8 NC 2 THREAD RING GAGES GO NO GO SET

DoAll 1" - 8 NC 2 THREAD RING GAGES GO NO GO SET

  • Hurdle Mills, North Carolina, United States
  • Jun 4th
Mitutoyo 12" .001" grad MasterVernier Height Gage w/carbide tipped Scribber

Mitutoyo 12" .001" grad MasterVernier Height Gage w/carbide tipped Scribber

  • Naperville, Illinois, United States
  • Jun 4th
STARRETT #178B RADIUS GAGE SET, 17/64" TO 1/2" BY 64THS, 32-LEAVES TOTAL!!!!!!

STARRETT #178B RADIUS GAGE SET, 17/64" TO 1/2" BY 64THS, 32-LEAVES TOTAL!!!!!!

  • Fountain Hills, Arizona, United States
  • Jun 4th
NDT Instruments Inc. Nova 201

NDT Instruments Inc. Nova 201

  • Niagara Falls, New York, United States
  • Jun 4th
Go Adjustable Thread Ring Gage, Vermont Gage, 362117510

Go Adjustable Thread Ring Gage, Vermont Gage, 362117510

  • Logan, Ohio, United States
  • Jun 4th
Training test for AWS-CWI welding exam with additional Part A question

Training test for AWS-CWI welding exam with additional Part A question

  • safwa, eastern region, Saudi Arabia
  • Jun 4th
Starrett No. 446B Depth Micrometer Gage Machinist Toolmakers Inspection Tools

Starrett No. 446B Depth Micrometer Gage Machinist Toolmakers Inspection Tools

  • Dayton, Ohio, United States
  • Jun 4th
8-36 NF-2 THREAD PLUG GAUGE

8-36 NF-2 THREAD PLUG GAUGE

  • Quincy, Massachusetts, United States
  • Jun 3rd
Mitutoyo model 7300 Dial Thickness Gage (pack # 44)

Mitutoyo model 7300 Dial Thickness Gage (pack # 44)

  • Middletown, Connecticut, United States
  • Jun 3rd
LUFKIN CENTER THREAD GAUGE 60 DEGREE (AMERICAN + METRIC)

LUFKIN CENTER THREAD GAUGE 60 DEGREE (AMERICAN + METRIC)

  • Middletown, Connecticut, United States
  • Jun 3rd
Mitutoyo 050101 Edge Finder 3/8" Dia. Shank .200" Dia. Tip

Mitutoyo 050101 Edge Finder 3/8" Dia. Shank .200" Dia. Tip

  • US, United States
  • Jun 3rd
KWIK-CHEK HOLE GAGE NO. 30 WITH HARD CASE

KWIK-CHEK HOLE GAGE NO. 30 WITH HARD CASE

  • Hillsboro, Oregon, United States
  • Jun 3rd
CORREX HAAG-STREIT 1000 GRAMM G PRECISION DIAL DYNAMOMETER 3b

CORREX HAAG-STREIT 1000 GRAMM G PRECISION DIAL DYNAMOMETER 3b

  • Saint Paul, Minnesota, United States
  • Jun 3rd
Johnson Gage Thread Checking Gage Set w/ standards and case - DM6

Johnson Gage Thread Checking Gage Set w/ standards and case - DM6

  • Bloomfield, Connecticut, United States
  • Jun 3rd
Agmaco 2.8000" Y Master Setting Ring

Agmaco 2.8000" Y Master Setting Ring

  • Cedar Hill, Texas, United States
  • Jun 3rd
New Metric & SAE Inch Thread Pitch Gauge 55 Sizes 335428

New Metric & SAE Inch Thread Pitch Gauge 55 Sizes 335428

  • Wayland, Michigan, United States
  • Jun 3rd

People who viewed this item also vieved

Vernier Caliper Measuring Measurement Tool 0-300mm

Vernier Caliper Measuring Measurement Tool 0-300mm

  • Metairie, Louisiana, United States
  • Jan 30th
Helios 61/2" (16 cm) Vernier Caliper with Case

Helios 61/2" (16 cm) Vernier Caliper with Case

  • Oceanside, New York, United States
  • Jan 30th
Zeiss CMM Circuit Board 608096-9048-000 NEW

Zeiss CMM Circuit Board 608096-9048-000 NEW

  • Encinitas, California, United States
  • Jan 30th
Renishaw Probe Stylus Ruby A-5000-3712 KS/CB

Renishaw Probe Stylus Ruby A-5000-3712 KS/CB

  • Sumas, Washington, United States
  • Jan 30th
Starrett No. 16BX / 7136X 0.062" ball indicator point (2 each)

Starrett No. 16BX / 7136X 0.062" ball indicator point (2 each)

  • Windsor, Connecticut, United States
  • Jan 30th
Mitutoyo digimatic indicator IDF-150E

Mitutoyo digimatic indicator IDF-150E

  • Milwaukee, Wisconsin, United States
  • Jan 30th
TESA V-Anvil Micrometer 5-20 mm

TESA V-Anvil Micrometer 5-20 mm

  • Plovdiv, Kichuk Paris, Bulgaria
  • Jan 30th
TESA V-Anvil Micrometer 20-35mm

TESA V-Anvil Micrometer 20-35mm

  • Plovdiv, Kichuk Paris, Bulgaria
  • Jan 30th
GENERAL HARDWARE NO. 16 PROTRACTOR CENTER FINDER GAUGE GAGE MACHINIST LATHE TOOL

GENERAL HARDWARE NO. 16 PROTRACTOR CENTER FINDER GAUGE GAGE MACHINIST LATHE TOOL

  • United States
  • Jan 30th
LS STARRETT GAUGE GAGE MACHINIST LATHE TOOL PART

LS STARRETT GAUGE GAGE MACHINIST LATHE TOOL PART

  • United States
  • Jan 30th
Craftsmsn No. 4011 Stainless Steel Tap Drill Sizes Reference Table

Craftsmsn No. 4011 Stainless Steel Tap Drill Sizes Reference Table

  • Venice, Florida, United States
  • Jan 30th
Starrett #118 Spacing Center Punch vintage tools.

Starrett #118 Spacing Center Punch vintage tools.

  • Athol, Massachusetts, United States
  • Jan 30th
Starrett 4 piece, 18" combination percision square set

Starrett 4 piece, 18" combination percision square set

  • Crown Point, Indiana, United States
  • Jan 30th
Brown And Sharpe #540 Hardened Solid Square

Brown And Sharpe #540 Hardened Solid Square

  • Wheatland, Pennsylvania, United States
  • Jan 30th
A FEW DIAL INDICATOR ARMS REGULAR ADJUSTABLE PRECISION MEASUREMENT

A FEW DIAL INDICATOR ARMS REGULAR ADJUSTABLE PRECISION MEASUREMENT

  • Belle Mead, New Jersey, United States
  • Feb 13th
Interapid 312B-2 With Noga Magnetic Base

Interapid 312B-2 With Noga Magnetic Base

  • Davisburg, Michigan, United States
  • Feb 13th
NEW Baseline 12-1027 Absolute Axis 360 Degree Digital Goniometer

NEW Baseline 12-1027 Absolute Axis 360 Degree Digital Goniometer

  • United States
  • Feb 16th
SPI PRO TRONIC Digital Level PRO 360

SPI PRO TRONIC Digital Level PRO 360

  • Toledo, Ohio, United States
  • Feb 17th
Brown & Sharpe Gauge Block .123

Brown & Sharpe Gauge Block .123

  • Hometown, Illinois, United States
  • Feb 22nd
Webber Gauge Block .1004

Webber Gauge Block .1004

  • Hometown, Illinois, United States
  • Feb 22nd
Granite Inspection Surface / Table 48" x 30"

Granite Inspection Surface / Table 48" x 30"

  • Stockton, California, United States
  • Mar 2nd
Standridge Granite Precision INSPECTION SURFACE Plate 36"x24"x4" Laser Table

Standridge Granite Precision INSPECTION SURFACE Plate 36"x24"x4" Laser Table

  • Canoga Park, California, United States
  • Mar 2nd

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies