CRITICAL ENVIRONMENT (C/E) SERIES OVERHEAD IONIZER MODEL # 43461, US $639.99 – Picture 0

CRITICAL ENVIRONMENT (C/E) SERIES OVERHEAD IONIZER MODEL # 43461, US $639.99 – Picture 1

Critical Environment (c/e) Series Overhead Ionizer Model # 43461

US $639.99

Milpitas, California, United States
Jan 30th

Open on mobile:
QR code

Ionizers are useful in preventing electrostatic charge generation, ElectroStatic Discharge, ElectroStatic Attraction, as well as preventing equipment latch-up and safety related shock. ANSI/ESD S20.20 Paragraph 6.2.3.1 Protected Areas Requirement states: "Ionization or other charge mitigating techniques shall be used at the workstation to neutralize electrostatic fields on all process essential insulators if the electrostatic field is considered a threat." Ionization is used to neutralize charges on process necessary insulators and isolated semiconductors. Some examples of process necessary insulators are: the PC board itself, plastic test stands, plastic housing where a PCB may be mounted, as well as computer monitor screens and regular cleaning wipes. Examples of floating or isolated conductors are: loaded PCB mounted in a stand where the pins are not contacting the dissipative workstation. Ionization is not effective on items that have large capacitance, like people and carts; however, ionizers should be considered as a method for charge neutralization in cases where grounding cannot be achieved. Air ionization can neutralize the static charge on insulated and isolated objects by producing separate charges in the molecules of the gases of the surrounding air. When an electrostatic charge is present on objects in the work environment, it will be neutralized by attracting opposite polarity charges from the ionized air. Note that ionization systems should not be used as a primary means of charge control on conductors or people. The 43461 and 43467 are 24" long units with 2 fans, and the 43462 and 43468 are 48" long units with 4 fans. All models have the same features permitting the user to select the best size for the application. Since our introduction of the first overhead ionizer in the market, we have continued to enhance our offerings with the most advanced features available. The C/E series offers many design improvements, most notably, our patent-pending “Emitter Cassette” While other manufacturers attempt to simplify or automate the cleaning of the emitter pins, what remains is one major flaw in the process - unless the ionizer is removed to another area, the contamination ends up on the workstation and on any product that happens to be nearby The C/E series solves this problem. When the emitters need to be cleaned, the cassettes are easily removed from the unit and taken to another area to be cleaned. This takes the dirt away from the workstation and product. To eliminate downtime, a spare set of clean emitter cassettes can be dropped in. The others can be cleaned when convenient. This concept is so unique, that we have been awarded a patent on it. Features • Removable emitter cassettes allow you to minimize contamination of the work area. • Closed-loop feedback electronic balance system continuously monitors output for optimal performance. • I/O port allows auto- calibration and remote status monitoring. • Sealed plenum chamber around each fan minimizes contamination. • Non-volatile adjustments for balance and fan speed are maintained in the absence of power. • Lockout key with distinctive front panel indicator prevents unauthorized adjustment. • Balance is individually adjustable at each fan zone. • Flashing front panel signal indicates when cleaning is needed. • IEC input and output connectors allow daisy-chaining of up to 2 units. • Stainless steel and powder-coated aluminum construction for durability and long life. Specifications Input Power: 120VAC, 250mA, IEC Outlet: Allows a second unit to be daisy-chained Fuse: 5x20mm 3 amp time lag Air Flow: 80-170 CFM, 24" model Emitters: 100% Tungsten, replaceable Ionization Type: Steady-state DC Weight: 6.2 lbs. (24" model) Size: 2" x 6" x 24" Mounting: (2) 1/4 " mounting holes each end

Condition	Used : An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
Seller Notes	“Unit has been in storage for a very long time. Unit is sold as is, if the unit is DOA a full refund can be provide (minus applicable shipping charges and tax)”