Crl Brushed Nickel Vienna Frameless Shower Pull And Hinge Set 3/8" - 1/2" Glass

US $125.00

Las Vegas, Nevada, United States
Jan 30th

Open on mobile:
QR code

View Larger Image Catalog Number: V1ES3BN Finish: BRUSHED NICKEL Hinges for 3/8" to 1/2" (10 to 12 mm) GlassSet Includes Two Hinges and One Set of Pull Handles Our Five Most Popular Hinge SeriesOur Four Most Popular Finishes Our Best-Selling Pull Handle or KnobAll Together in Easy-to-Order Sets This CRL Shower Pull and Hinge Set consists of one set of BM6X6 Tubular Back-to-Back Pull Handles with metal washers, and two each Vienna 037 Series Wall Mount Hinges. CRL Vienna Hinges are the solution for wider, heavier doors that traditional hinges are not strong enough to support. Two strategically placed steel pins inside the hinge provide template options, and satisfy two schools of thought for mounting shower door hinges. For the safety of "mouse-ears" type cut-outs, the two steel pins should be left in place. This allows the Vienna Hinge to be used with it's own CRL "mouse-ears" cut-out. On the other hand, to enable increased adjustability, the two pins can be removed. This allows the Vienna Hinge to fit it's own CRL rectangular shaped, square cornered cut-out. In some cases, it will also fit competitive rectangular shaped, square cornered cut-outs. STANDARD REVERSIBLE PIVOT PIN: Each Vienna Hinge contains a Reversible Pivot Pin. One side of the Pin is marked at 90?. The opposite side of the Pin is marked 85?. Standard Vienna Hinges come with the 90? side activated. Pre-Set Models come with the Pin pre-set for 85? (5? tighter closure into shower interior). The Pin can be rotated (not flipped upside down) to activate the other side. CUSTOM PIVOT PIN: Custom Pivot Pins are available to accommodate "off-angle" installations. As an example, you may encounter a wall that will not meet your door at 90?. If the standard 5? Pivot Pin contained in the hinge does not assist in closing the door to the position desired, you may specify the angle needed for a Custom Pivot Pin (up to 45?). Using two hinges with 3/8" to 1/2" glass (10 to 12 mm) the hinge will hold up to 110 lbs. (50 kg) with a maximum door width of 36" (914 mm). Using three hinges with 3/8" to 1/2" glass (10 to 12 mm) the hinge will hold up to 140 lbs. (63 kg) with a maximum door width of 36" (914 mm). SPECIFICATIONS: Glass Thickness: 3/8" (10 mm) to 1/2" (12 mm) Tempered Safety Glass Construction: Solid Brass Hinge Swings: 90? In and 90? Out Closing Type: Self-Centering when within 15? of closed position. Cut-Out Required - Except V1E092 which Requires Cut-Out for Door and Two Holes for Fixed Panel Includes: Gaskets, Screws, and Glass Fabrication Dimensions