Crp Centrifugal Polypropylene Pump 3/4 Hp 1.5" Npt 92 Gpm @ 10 Ft 115/230 Vac

US $760

North Chelmsford, Massachusetts, United States
Oct 22nd

Open on mobile:
QR code

Unused Old Stock Corrosion-Resistant Centrifugal Polypropylene Pump This pump is unused old stock. It has been on a shelf collecting dust for years. When I got it, I was able to rotate the pump impeller by pushing the impeller with my fingers through the inlet. I did this before applying power. I put power to it twice. Each time only for a 1/2 second. It spun up without an issue. The 1.5" NPT inlet and outlet connections show no sign of use. The pump casing has gotten a little dirty over time. The motor has gotten a little rusty over time. There is a sheet metal plate that screws onto the back of the motor to protect motor. The sheet metal cover has a dent. There is drain port with a plug and seal port with a plug. One of the plugs is chipped. This is unused old stock. The pump is the only thing included. If you happen to need any simple items to go along with it, hose barbs, electrical connections, pressure gauges, let me know and I will see what I can do. Extra items would not be part of the purchase price. From what I can tell, the motor and pump would cost nearly $1000 new. I am listing it at 1/3 the price because of the appearance. If you do not want the motor contact me before purchasing. Pump Information: Marking on Pump: CRP-H Label Product: CRP Pump Model: CMPC-1-T Serial Number: 122089-13 Motor Information: Manufacturer: Baldor Catalogue Number: CJL1306A Frame: 56J HP: 3/4 Voltage: 115 / 230 Amps: 11 / 5.5 R.P.M.: 3450 HZ: 60 Phase: 1 Vendor's Information Corrosion-Resistant CloseCoupled Centrifugal Pumps • Use 3450 rpm NEMA 56J frame motors with base) • Discharge can be rotated in 90-degree increments • All pumps have 1 1/2" female NPT inlet and outlet ports • Standard pump models (at 3450 RPM) will handle specific gravities to 1.1 (at 100 SSU or less) • Standard pump models (at 3450 RPM) will handle viscosity to 100 SSU (at 1.1 specific gravity or less) and up to 200 SSU (specific gravity of 1.0 or less) (Polypropylene Case) Fine Print: If you have any questions about the item(s) on auction please contact me before the close of the auction. I will try to answer questions to the best of my ability. The high bidder should contact me with his/her shipping address after the auction. Shipping costs are the actual cost of shipping, packing materials, a padded envelope and dropping it off at the post office. If an international bidder can not pay in US funds, the bidder must include the conversion fees and any bank charges for cashing international checks. I only accept Paypal credit/debit card payments from people with 20 or more positive feedbacks and rating of 95% or better