CW-3000 Industrial Water Chiller, 0.8KW / 1.5KW Multi - heads Spindle Cooling, US $258.00 – Picture 0

CW-3000 Industrial Water Chiller, 0.8KW / 1.5KW Multi - heads Spindle Cooling, US $258.00 – Picture 1

CW-3000 Industrial Water Chiller, 0.8KW / 1.5KW Multi - heads Spindle Cooling, US $258.00 – Picture 2

Cw-3000 Industrial Water Chiller, 0.8kw / 1.5kw Multi - Heads Spindle Cooling

US $258.00

??, ??, China
Jan 31st

Open on mobile:
QR code

Description It is designed for cooling the spindle of the cnc engraving machine. Have design patent Certificate, CE Certificate This Water Chiller has been sold largely to Europe, South America, Asia and other markets. Economic cooling equipment, easy to install and operate, compact and easily movable Features • You can choose different models according to local voltage and frequency. • CW-3000HA water chiller, comprehensive reference to the international radiator - type cooling system, is suitable for small water cooling device. • Specific disconnection alarm securing protection. • Enclosed water tanks, water used for a long time. • Professional forced air - cooled radiator, high heat dissipating capacity and not easy to be blocked. • Equipped with alarm output port, can quickly protect sensitive components. • High cost performance, low failure rate. Alarm Function’s Description The cooling water circulation loop alarm causes and the work of the state table Items Green light Red light Buzzer Out H1, H2 Out H1, H3 Normal On OFF No voice OFF On Water stops up OFF On Voice On OFF Surpasses 60°C OFF On Voice On OFF Pump breakdown OFF On Voice On OFF Water alarm OFF On Voice On OFF Faulted circuit / / / On OFF No Power / / / On OFF Maintenance Cooling machine used in long term, you should open the machine and clean the dust in order to ensure good heat dissipation. You can use non – corrosive antifreeze if you are in the northern cold regions. Our water cooling machine has S & A logo on the top of injection port. Fake cooler without the logo. Our water chiller has function of Intelligent temperature control. Fake cooler without this function. Our water chiller has S & A trademark in this label. Fake cooler without this trademark. Our water chiller has S & A logo on the outfall Fake cooler without this logo S & A trademark is printed on our water chiller. Fake cooler without this trademark Industrial cooling machine’s installation is very simple, the new machine for the first time using, you can install it as following steps. A. Open the package and check the machine and all accessories. B. Open the mouth screw on the top of machine, add cooling water (Please don’t power the machine without water). C. Connect the inlet and outlet hose between water cooler and cnc engraver. D. Connect the power cable, turn the power switch (Note: Don’t let the water overflow). E. Check the radiator water level again (Keep the distance between water level and mouth is 80 – 150mm). Caution A cooler water condition in the absence of electricity is prohibited! Location placed cooler should select a well - ventilated, dry environment, away from other heat sources. Outlet of the back of the cooler should be away from obstruction for more than 30cm, both sides of the inlet should be away from obstructions for more than 10cm. Cooling machine no use for long time or in transport must keep emptying the cooling water. Model CW-3000HA Power Supply AC 1P 100 - 220V, 50 / 60Hz Current 0.9A Tank Capacity 9L Cooling Radiator that forces the wind cooling Amount of Cooling 50W / °C Way of Circulation Water pump forces circulation Maximum Flow 13L / min Maximum Pumping Lift 12m Inlet and Outlet External Dia.:10mm brass connector Protection Flow alarm CW-3000H: applied to cool dual 1.5KW CNC spindles or welding equipment CW-3000HA: applied to cool four 1.5KW CNC spindles or welding equipment CW3000HA water chiller machine 1 set Power cable 1 pc Connection hose 1 pc Sealing washer 2 pcs 250V/2A spare fuse (Mounted on the power socket interface within the insurance reserve) 1 pc User manual 1 pc Alarm signal output plug 1 pc Caution: The appliance is not to be used by children or persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge, unless they have been given supervision or instruction, children supervised not to play with the appliance! Package: CW-3000 80W CO2 Laser Tube Water Chiller, AC110V,220V CW-3000H 0.8KW, 1.5KW Spindle Cooling Water Chiller, 1P 220V CW-3000HA Water Chiller, 0.8KW, 1.5KW Multi - heads Spindle Cooling, 1P

Condition:

New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...

product ID

12404