+ Post new Ad
Dainichi Lathe 21" Swing, US $4100 – Picture 0
Dainichi Lathe 21" Swing, US $4100 – Picture 0

Dainichi Lathe 21" Swing

US $4100

  • Brainerd, Minnesota, United States
  • Mar 12th
Open on mobile:
QR code
Dainichi  Heavy Duty High Speed 21" Swing Lathe Description: Model DLG Working order. Center height 10.5" Maximum Distance Between Centers 78.75" Swing Over Bed 21" Swing Over Gap 31.5" Swing Over Carriage 12" Length of Bed 120" Width of Bed 16" Spindle Speed 24 steps 20~1000 RPM Longitudinal Feed 48 ch 0.0014"~0.079"/ 1 rev. of sp. Crosee Feed 48 ch. 0.0007"~0.039/1 rev. of sp. 10 Hp Motor Machine Weight 6150 lbs The extras on the bench pictured go with this Lathe and any manuals for the machine. This machine is in good working order. ***SOLD AS IS WHERE IS*** This item can only be PICKED UP or SHIPPED FREIGHT at BUYER's Cost Our facility can accommodate trucks and loading. 
Condition:
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...
Country/Region of Manufacture Japan
Model DLG 80
Brand Dainichi
MPN DLG 80

Directions

Similar products from Tools for Lathe Machines

Poland 10" 4 jaw chuck D1-6 mount. 2-1/2" hole. for engine lathe lathes

Poland 10" 4 jaw chuck D1-6 mount. 2-1/2" hole. for engine lathe lathes

  • Houston, Texas, United States
  • Mar 12th
LARGE LOT OF MACHINISTS PIECES -LATHES 1-MISSING BACK PLATE--PR. PARALLELS-ETC

LARGE LOT OF MACHINISTS PIECES -LATHES 1-MISSING BACK PLATE--PR. PARALLELS-ETC

  • Haverhill, Massachusetts, United States
  • Mar 12th
Tru-Cut Armiture Lathe & Undercutter, Model B10

Tru-Cut Armiture Lathe & Undercutter, Model B10

  • Yuma, Colorado, United States
  • Mar 12th
Micro 100 RC 500100 Lathe Tool Brazed Insert

Micro 100 RC 500100 Lathe Tool Brazed Insert

  • Aurora, Indiana, United States
  • Mar 12th
NEW KENNAMETAL CUTOFF/GROOVING TOOLHOLDER KGDSL-168D

NEW KENNAMETAL CUTOFF/GROOVING TOOLHOLDER KGDSL-168D

  • Wadley, Alabama, United States
  • Mar 12th
6 "atlas craftsman 101, 618 lathe guard assembly and bracket #M6-28 and M6-28x

6 "atlas craftsman 101, 618 lathe guard assembly and bracket #M6-28 and M6-28x

  • Pomona, California, United States
  • Mar 12th
Skinner 14" 4 Jaw Lathe Chuck No.914 No. Resv

Skinner 14" 4 Jaw Lathe Chuck No.914 No. Resv

  • Staten Island, New York, United States
  • Mar 12th
Paulson Lathe Kit

Paulson Lathe Kit

  • San Carlos, California, United States
  • Mar 12th
Lathe Insert Part # CNMG 543A NN60

Lathe Insert Part # CNMG 543A NN60

  • Tempe, Arizona, United States
  • Mar 12th
BUCK CHUCK 12" 3-JAW HYDRAULIC POWER LATHE CHUCK No. 4012 QC NICE

BUCK CHUCK 12" 3-JAW HYDRAULIC POWER LATHE CHUCK No. 4012 QC NICE

  • Staten Island, New York, United States
  • Mar 12th
Cutler hammer Forward Reverse Switch Lathe Milling Machine vintage control winch

Cutler hammer Forward Reverse Switch Lathe Milling Machine vintage control winch

  • Farmington, Missouri, United States
  • Mar 12th
SUMITOMO INDEXABLE LATHE THREADING TOOL HOLDER STIR 103 STK 2569

SUMITOMO INDEXABLE LATHE THREADING TOOL HOLDER STIR 103 STK 2569

  • Wadley, Alabama, United States
  • Mar 12th
leblond regal lathe steady rest

leblond regal lathe steady rest

  • Sioux Falls, South Dakota, United States
  • Mar 12th
4 NOS Carboloy Cemented Carbide Cutting Tools from Metal Lathe 78B BR-16 1" Sq.

4 NOS Carboloy Cemented Carbide Cutting Tools from Metal Lathe 78B BR-16 1" Sq.

  • Troy, Michigan, United States
  • Mar 12th
ATLAS CRAFTSMAN 10-500 MILLING ATTACHMENT VISE BOLTS ATLAS CRAFTSMAN LATHE NEW

ATLAS CRAFTSMAN 10-500 MILLING ATTACHMENT VISE BOLTS ATLAS CRAFTSMAN LATHE NEW

  • Niles, Michigan, United States
  • Mar 12th
SOUTH BEND 9-10K LATHE AS31NK2 GEAR BRACKET FINE USED PART

SOUTH BEND 9-10K LATHE AS31NK2 GEAR BRACKET FINE USED PART

  • Niles, Michigan, United States
  • Mar 12th
ATLAS CRAFTSMAN 9-12 LATHE 10-302 UPPER SWIVEL GD USED

ATLAS CRAFTSMAN 9-12 LATHE 10-302 UPPER SWIVEL GD USED

  • Niles, Michigan, United States
  • Mar 12th
Trucut Armature Lathe & UndercutterTailstock Model B15

Trucut Armature Lathe & UndercutterTailstock Model B15

  • Mount Carmel, Illinois, United States
  • Mar 12th
5 NOS Carboloy Cemented Carbide Cutting Tools 6" long from Metal Lathe C-64 78 B

5 NOS Carboloy Cemented Carbide Cutting Tools 6" long from Metal Lathe C-64 78 B

  • Troy, Michigan, United States
  • Mar 12th
Unimat 3 Guard

Unimat 3 Guard

  • Graytown, Ohio, United States
  • Mar 11th

People who viewed this item also vieved

BROWN & SHARPE #22 HEX COLLET. 5/16". 12231410

BROWN & SHARPE #22 HEX COLLET. 5/16". 12231410

  • Fox Lake, Illinois, United States
  • Jan 30th
MORRISON #22 SEMI SERRATED HEX COLLET. 5/16". 1223149

MORRISON #22 SEMI SERRATED HEX COLLET. 5/16". 1223149

  • Fox Lake, Illinois, United States
  • Jan 30th
HARDINGE #22 HEX COLLET. 3/8". 1223148

HARDINGE #22 HEX COLLET. 3/8". 1223148

  • Fox Lake, Illinois, United States
  • Jan 30th
3 nice Mueller No Blo Valve Changers plumming tapping tools

3 nice Mueller No Blo Valve Changers plumming tapping tools

  • Winslow, Arkansas, United States
  • Jan 30th
HELICOIL H-COIL INSTALLATION TOOL 7551-04-4 (2541)

HELICOIL H-COIL INSTALLATION TOOL 7551-04-4 (2541)

  • Chicago, Illinois, United States
  • Jan 30th
100 New Helicoil Screw Thread Inserts 6-32 x .138

100 New Helicoil Screw Thread Inserts 6-32 x .138

  • Folkston, Georgia, United States
  • Jan 30th
System 3R 22.5mm capacity CAT 30 EDM Electrode Holder

System 3R 22.5mm capacity CAT 30 EDM Electrode Holder

  • Portland, Connecticut, United States
  • Jan 30th
SYSTEM 3R-MACRO 20 MM ELECTRODE HOLDER

SYSTEM 3R-MACRO 20 MM ELECTRODE HOLDER

  • Coeur d'Alene, Idaho, United States
  • Jan 30th
Custom EDM Fixture

Custom EDM Fixture

  • Mesa, Arizona, United States
  • Jan 30th
AIR MITE 500DR L 4" STROKE SPRING RETURN 2200 LBS DOWN AIR PNEUMATIC ARBOR PRESS

AIR MITE 500DR L 4" STROKE SPRING RETURN 2200 LBS DOWN AIR PNEUMATIC ARBOR PRESS

  • Clover, South Carolina, United States
  • Jan 30th
NO NAME 1 1/2" STROKE SPRING RETURN 2200 LBS DOWN AIR PNEUMATIC ARBOR PRESS

NO NAME 1 1/2" STROKE SPRING RETURN 2200 LBS DOWN AIR PNEUMATIC ARBOR PRESS

  • Clover, South Carolina, United States
  • Jan 30th
Beverly shear 2B

Beverly shear 2B

  • Vernon, New York, United States
  • Jan 30th
NEW ACRO LAP 11/32" BLIND HOLE LAPPING BARREL. Acro Tool. Barrel Lap. (B12)

NEW ACRO LAP 11/32" BLIND HOLE LAPPING BARREL. Acro Tool. Barrel Lap. (B12)

  • Aliso Viejo, California, United States
  • Jan 30th
NEW ACRO LAP 5/16" BLIND HOLE LAPPING BARREL. Acro Tool. Barrel Lap. (B12)

NEW ACRO LAP 5/16" BLIND HOLE LAPPING BARREL. Acro Tool. Barrel Lap. (B12)

  • Aliso Viejo, California, United States
  • Jan 30th
NEW ACRO LAP 1/2" BLIND HOLE LAPPING BARREL. Acro Tool. Barrel Lap. (B12)

NEW ACRO LAP 1/2" BLIND HOLE LAPPING BARREL. Acro Tool. Barrel Lap. (B12)

  • Aliso Viejo, California, United States
  • Jan 30th
7 CINCINNATI MILACRON 18 X 1 X 5 12A80-K4-VFM. 73678-2KF. BRAND NEW WILL SHIP

7 CINCINNATI MILACRON 18 X 1 X 5 12A80-K4-VFM. 73678-2KF. BRAND NEW WILL SHIP

  • Sellersburg, Indiana, United States
  • Jan 30th
CINCINNATI MILACRON. 4X2X1-1/4. 5C80 M9-B2 MAX RPM 7500.. 5 C 80

CINCINNATI MILACRON. 4X2X1-1/4. 5C80 M9-B2 MAX RPM 7500.. 5 C 80

  • Sellersburg, Indiana, United States
  • Jan 30th
CINCINNATI MILACRON 18 X 1 X 5 12A801-K4-VFME. 42119-1KL USED WILL SHIP

CINCINNATI MILACRON 18 X 1 X 5 12A801-K4-VFME. 42119-1KL USED WILL SHIP

  • Sellersburg, Indiana, United States
  • Jan 30th
NICE LOT OF 4 CONVEX AND CONCAVE MILLING CUTTERS 2-1/2" TO 3-1/2" WITH 1" BORES

NICE LOT OF 4 CONVEX AND CONCAVE MILLING CUTTERS 2-1/2" TO 3-1/2" WITH 1" BORES

  • Ellington, New York, United States
  • Jan 30th
BIG LOT OF R8 TOOL HOLDERS & COLLETS

BIG LOT OF R8 TOOL HOLDERS & COLLETS

  • Ellington, New York, United States
  • Jan 30th
PAIR OF HSS HOBBING MILLING CUTTERS 1-7/8" WITH 3/4" BORE

PAIR OF HSS HOBBING MILLING CUTTERS 1-7/8" WITH 3/4" BORE

  • Ellington, New York, United States
  • Jan 30th
UNKNOWN MFG. TRI-CLAMP SPOOL 1 1/2"-2" STAINLESS STEEL 3/4" INSIDE DIAMETER

UNKNOWN MFG. TRI-CLAMP SPOOL 1 1/2"-2" STAINLESS STEEL 3/4" INSIDE DIAMETER

  • Columbia, South Carolina, United States
  • Jan 30th
Italimpianti Model FD/A Quench Annealing Furnace

Italimpianti Model FD/A Quench Annealing Furnace

  • Pawtucket, Rhode Island, United States
  • Jan 30th
ROCKWELL BUILT DELTA LIGHT INDUSTRIAL POWER TOOLS CATALOG 1962 A Machinery #RR2

ROCKWELL BUILT DELTA LIGHT INDUSTRIAL POWER TOOLS CATALOG 1962 A Machinery #RR2

  • Perth, Ontario, Canada
  • Jan 30th
BRAND NEW 2 PAIR SELF CENTERING GUIDES FOR GROB VERTICAL BAND SAWS FREE SHIP

BRAND NEW 2 PAIR SELF CENTERING GUIDES FOR GROB VERTICAL BAND SAWS FREE SHIP

  • Seekonk, Massachusetts, United States
  • Jan 30th
DAKE 370S Semi-Auto Circular Cold Saw, New 2007.

DAKE 370S Semi-Auto Circular Cold Saw, New 2007.

  • Dayton, Ohio, United States
  • Jan 30th
DoAll C-916 horizontal band saw

DoAll C-916 horizontal band saw

  • Mount Vernon, Illinois, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies