Datakom Dkg-173 120/208v Automatic Transfer Switch (ats)

US $100.00

  • Gori, Georgia
  • Mar 26th
DESCRIPTION The DATAKOM model DKG-173 is a DIN Rail mounted ATS controller not requiring DC supply. The unit monitors 3-phase mains voltages, sends remote start command to the generating set and performs changeover of both generator and mains contactors. The front panel leds provide information about mains and generator power availability as well as contactor positions. Mains return delay and genset contactor delays are adjustable between 1 and 40 seconds through front panel knobs. OPERATION When both mains voltages are over the limit: R, MC, RST leds are on. The MCB terminal is supplied with voltage R. The REMOTE START relay contact is open.   If any AC phase voltage goes below limit: R, MC, RST leds turn off. The MCB terminal is open. The REMOTE START relay contact closes.   The REMOTE START output is expected to provide a genset running condition. When the genset voltage G is over the limit: The G led turns on. At the expiration of the genset contactor delay the GC  led  turns  on  and  the GCB terminal is supplied with voltage G. When both mains voltages are over the limit: R and RST leds turn on. At the expiration of the mains return delay the MC led turns on and the MCB terminal is supplied with voltage R. The REMOTE START relay contact opens. The  contactor delays for the genset and are manually adjusted via potentiometers situated on the front panel of the unit. INPUTS R-S-T: Mains phase voltages. NEUT-MN: Mains neutral terminal. G: Generator phase voltage. NEUT-GN: Generator neutral terminal. OUTPUTS MCB-MAINS CONTACTOR: Normally open relay output connecting the phase-R voltage to the terminal. (10A@250V-AC) GCB-GENERATOR CONTACTOR: Normally open relay output connecting the phase-G voltage to the terminal. (10A@250V-AC) REMOTE START: Normally open engine start request relay output. (10A@28V-DC/250V-AC) LED INDICATORS G: genset voltage present GC: genset contactor closed R: power supplied from mains RST: mains voltages present MC: mains contactor closed  TECHNICAL SPECIFICATIONS Alternator Voltage: 75-150 V-AC (Ph-N) Mains voltages: 75-150 V-AC (Ph-N) Generator Contactor Delay: 1 to 40 sec. adjustable Mains Return Delay: 1 to 40 sec. adjustable MCB Relay Output: 10A @ 250V-AC GCB Relay Output: 10A @ 250V-AC Remote Start Relay Output: 10A @250V-AC/28V-DC Operating temp.: -30°C (-22°F) to 70 °C (158°F). Storage temp.: -30°C (-22°F) to 80 °C (176°F). Maximum humidity: 95% non-condensing. Dimensions: 70x115x66mm (WxHxD) Weight: 180g (approx.) Installation: DIN Rail mounted. Case Material: High Temp. ABS/PC (UL94-V0) IP Protection: IP20 Conformity (EU directives) 2006/95/EC (low voltage) 2004/108/EC (EMC) Norms of reference: EN 61010 (safety requirements) EN 61326 (EMC requirements) --------------------------------------------------------------------------------------------------------------- Check out my other items for generator sets: J1939 Communication Units  Synchronization Units   Automatic Mains Failure Units  Remote Start Units   Manual Start Units   Automatic Transfer Switches   Battery Chargers   Alternator Voltage Regulators   Panel Measurement Units   Earthquake Units   Telecommunication Units   Extension Units --------------------------------------------------------------------------------------------------------------- We have a long time experience in international sales and make delivery only with traceable service. -------------------------------------------------------------------------------------------------------------- E-mail: info@controllers4generators.com Other datakom products on www.controllers4generators.com-------------------------------------------------------------------------------------------------------------- ALL CUSTOMS FEES IN COUNTRY OF DESTINATION ARE UNDER BUYER'S  RESPONSIBILITY
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Brand DATAKOM
generator controller, set automatic
Model DKG-173

Directions

Similar products from Generator Parts & Accessories

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies