Dc 12v Pwm Pc Cpu Fan Temperature Control Speed Controller Module Jglx

US $5.61

Shanghai, China
Jul 28th

Open on mobile:
QR code

Specifications: Working voltage:DC12V Circuit load capacity: maximum current per output 5A, the bus currents up 9A Output Range: The first channel 20% -100%, or 40% -100% (TFL = ON) The second channel and the third channel 10% -100% (Note: Above range only for PWM range, the actual control effect will vary depending on the fan.) Temperature probe parameters: 50K B = 3950 Thermostat temperature zone error: error depending on the temperature probe, generally 3-5% Stall alarm minimum speed: 700-800 rpm Function setting switch Description: TFL (No. 1): The lowest temperature channel PWM setting, when ON state FAN1 PWM minimum is 40%, when OFF the minimum PWM of FAN1 is 20%. TP1 TP2 (No. 2,3): Temperature channel control temperature zones are interpreted as follows (need to used with the temperature probe): TP1 TP2 Accelerating temperature Full speed temperature OFF OFF 35° 45° ON OFF 40° 55° OFF ON 50° 70° ON ON 60° 90° When the temperature lower than the accelerated temperature, then output at the minimum rotation speed; when it exceed over the full temperature, then always output at full speed. BF1 BF2 (No. 4,5): corresponds FAN1 FAN2 stall alarm function switch, when the corresponding open channel fan break down, the controller will alarm with soundand light (works with buzzle), alarm will automatically eliminated when the fan is rotated recovery . If BF1 and BF2 both are open (ON), the FAN1, FAN2 have any one or both stops, the controller will alarm! Package Included: 1 x Speed controller 1 x Temperature probe 1 x Buzzle Specifications: Working voltage:DC12V Circuit load capacity: maximum current per output 5A, the bus currents up 9A Output Range: The first channel 20% -100%, or 40% -100% (TFL = ON) The second channel and the third channel 10% -100% (Note: Above range only for PWM range, the actual control effect will vary depending on the fan.) Temperature probe parameters: 50K B = 3950 Thermostat temperature zone error: error depending on the temperature probe, generally 3-5% Stall alarm minimum speed: 700-800 rpm Function setting switch Description: TFL (No. 1): The lowest temperature channel PWM setting, when ON state FAN1 PWM minimum is 40%, when OFF the minimum PWM of FAN1 is 20%. TP1 TP2 (No. 2,3): Temperature channel control temperature zones are interpreted as follows (need to used with the temperature probe): TP1 TP2 Accelerating temperature Full speed temperature OFF OFF 35° 45° ON OFF 40° 55° OFF ON 50° 70° ON ON 60° 90° When the temperature lower than the accelerated temperature, then output at the minimum rotation speed; when it exceed over the full temperature, then always output at full speed. BF1 BF2 (No. 4,5): corresponds FAN1 FAN2 stall alarm function switch, when the corresponding open channel fan break down, the controller will alarm with soundand light (works with buzzle), alarm will automatically eliminated when the fan is rotated recovery . If BF1 and BF2 both are open (ON), the FAN1, FAN2 have any one or both stops, the controller will alarm! Package Included: 1 x Speed controller 1 x Temperature probe 1 x Buzzle On Jul-28-21 at 08:58:19 PDT, seller added the following information:

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Country/Region of Manufacture	China
Numro de pice fabricant	Non applicable
EAN	Does not apply
Brand	Unbranded
UPC	Does not apply
GTIN	Does not apply
Manufacturer Part Number	Does not apply
Marque	Sans marque/Gnrique