Dds Function Signal Generator Module Fg-100 1hz~500khz Sine +square Wave 3.7~10v

US $36.90

suzhou, China
Aug 13th

Open on mobile:
QR code

Product Description DDS Function Signal Generator Module FG-100 1HZ~500KHz Sine +Square Wave 3.7~10V Product description: 1. Used to align audio equipment and tune to the lower radio frequency of the lower end of the Am frequency band or the Amateur frequency band 2. Small size, complete functions, simple operation and easy to carry. 3. It can be powered by an adapter or a lithium battery. 4. The good accuracy and frequency stability of DDS are suitable for oscilloscope scanning time factor calibration. 5. Square wave output, suitable for oscilloscope attenuator and probe pulse characteristic adjustment. 6. Together with the oscilloscope, it can be used for electronic circuit testing and debugging, frequency characteristics and impulse response testing, and audio amplifier measurement. Product specifications: Frequency range: sine wave 1Hz-500kHz (where the output amplitude is flat to 200 kHz, as the frequency increases, the output amplitude will decrease), other waveforms 1Hz-50kHz (but the upper limit of the adjustable frequency has not reached If the requirements are not high, the frequency of use can be further increased). Resolution: 1Hz. Output waveforms: sine wave, square wave, triangle wave, forward sawtooth wave, reverse sawtooth wave, electrocardiogram, noise wave. Sine wave distortion: <1% below 1kHz, <0.5% above 1kHz. Output amplitude: maximum ±10V (P-P). Output impedance: 50 ohms. DC bias: maximum ±10V, with shutdown function. All set parameters can be saved There are some filters that can be turned on and off, which can be well adapted to the output of sine and pulse waveforms. Power supply: DC3.7-10V. It is recommended to use DC5V adapter or 3.7V lithium battery. Package list: 1 *DDS function signal generator 1 *USB to DC power cord Note: 1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness. 2.Please allow slight manual measurement deviation for the data. Payment We accept payment via Paypal only. Payment must be completed within 5 days. If you have any problems about payment, please contact us via ebay message. Delivery details We only ship to confirmed Paypal addresses. Please comfirm that your paypal address is in line with your shipping address. Please kindly note that the combined shipping is not provided because the shipping fee is calculated by weight. Also, the each additional item means exactly the the same color and size. It takes about 7-15 working days to US; about 10-30 working days to other countries. Transit time may be a little delayed because of the bad weather and customs inspection. If you do not receive your item within 30 working days since payment finished, please contact us immediately for further assistance. Contact us We strive for 100% customer satisfaction! Positive Feedback is very important to us. If you have any questions, please feel free to contact us via "Ask seller a question" . We will reply your email within 24 working hours.

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Brand	Unbranded
Package Contents	1 DDS function signal generator 1 USB to DC power cord
MPN	Does Not Apply
UPC	Does not apply