US $20.00
| Condition: |
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully
operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
...
|
Manufacturer | NO NAME |
Directions
Similar products from Live Centers
READY TOOL PRECISION LIVE CENTER 2MT SHANK
Bull Nose Live Center MT4 & MT4 -MT3 Adaptor
Riten Industries 5MT Live Center 92225 "Brand New in the Box"
ROYAL R125530 #5 Point for 4MT & 5MT CP Live Center H21
Ready Tool Center No. 3 Morse Taper
Live Center #2MT Spindle Shank
Bull Nose Dead Center - Jarno Taper (Inv.24270)
Carbide Tipped Dead Center - Jarno Taper (Inv.24271)
READY-TOOL 250-TR LATHE LIVE CENTER,#5 MORSE TAPER used
3 LATHE DEAD CENTERS LARGE 11" OVERALL LEGNTH
5C COLLET DEAD CENTER HEADSTOCK MALE WORKHOLDING MACHINIST
5C EXPANDING COLLET 1-1/2" OD X 1"
Machinists 6PCS TAPS NPT SKIP TOOTH NEW USA MORSE VERY NICE BIG SET CRAZY CHEAP
MACHINIST LATHE TOOL ROHM LIVE CENTER 106H MK3 Made West Germany
HURON # 3 Live Center for Lathe, #3 Morse Taper, Carbide Tipped, Smooth Bearing
Machine part lathe grinder cutter center indexing index balance holder alignment
People who viewed this item also vieved
SHARS 5x5x7" "V" Angle Blocks .00025" NEW
Set of 6 TSD /Univ Engr Metric Collets 16mm to 25mm NEW
Lot of (13) Scully-Jones Single Angle Collets Workholding .125 through 1.000 IN
Lot of (6) Scully-Jones Single Angle Collets Workholding .500 through 1.000 IN
MACHINIST MILL LATHE TOOL NICE HEAVY Large 17" Lathe Face Plate
HARDINGE HORIZONTAL / VERTICAL 5C INDEXING COLLET FIXTURE - HV-4N - MILL
4" Westcott 3 Jaw Chuck, Plain Back - #6304
Bison Chuck 6-1/4" No Reserve!
Lot Of 2 New!! Iron Base Push Pull Toggle Clamp 227Kg 500 Lbs
WILLIAMS Vulcan 6" Strap Clamp Hold Down Goose Neck - SC76 - Made in USA
LOT OF 2 New!! Carr Lane Toggle Clamp CL-112-TC
COLUMBIAN BENCH VISE SWIVEL BASE #D44 M2 4" USA
Vintage Heavy Duty Wilton 645 Swivel Base w/anvil Machinist Bench Vise 5" jaws
Vintage The Rex Engraving Block Ball Vise Jeweler Jewelry Engraver Gunsmith Tool
New bulk 10pcs C30 ER32 100L Straight Collet Chuck Holder CNC Mill
SMW SLK-314 SELF CENTERING 30-145mm STEADY REST CNC LATHE WORKHOLDING
Alpha Workholding Solutions Magnet Eagle Lift EL 1200
H & R Manufacturing Jaw nut 1.5mm x 60 serrated
Yuasa CNC Rotary Table / Indexer CPDX-6 With UDNC-MY53 Control
KITAGAWA ROTARY 5C INDEXER TC100-33 MODEL 2018
Nice! SIP P1-5 TILTING ROTARY TABLE, EXTREMELY ACCURATE SWISS MADE
MCH 1/2 Precision parellel set 4 matched pairs
KODAK 1 INCH VERTICAL VEE BLOCKS, 2 BLOCKS FOR ONE MONEY
Small Unmarked Mill V-Block,w/ Clamp,1 x 1-1/16 x1-7/16~NICE #MB30216
3 Pc. Techniks CAT 40 ER 16-2.76" 25K RPM Balance CNC Mill Collet Chucks
42 Pc. Techniks CAT 40 ER 16 & ER 32 25K RPM Balance CNC Mill Collet Chucks Kit
14 Pc. Techniks CAT 40 ER 16 & ER 32 25K RPM Balance CNC Mill Collet Chucks
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
Accept All Cookies