+ Post new Ad
DEAL! HPI PIONEER MX - MINI CHUCK - BT40 SHANK - BT40-HMX8-85 - USES MX08 COLLET, US $34.99 – Picture 0
DEAL! HPI PIONEER MX - MINI CHUCK - BT40 SHANK - BT40-HMX8-85 - USES MX08 COLLET, US $34.99 – Picture 1
DEAL! HPI PIONEER MX - MINI CHUCK - BT40 SHANK - BT40-HMX8-85 - USES MX08 COLLET, US $34.99 – Picture 2
DEAL! HPI PIONEER MX - MINI CHUCK - BT40 SHANK - BT40-HMX8-85 - USES MX08 COLLET, US $34.99 – Picture 3
DEAL! HPI PIONEER MX - MINI CHUCK - BT40 SHANK - BT40-HMX8-85 - USES MX08 COLLET, US $34.99 – Picture 4
DEAL! HPI PIONEER MX - MINI CHUCK - BT40 SHANK - BT40-HMX8-85 - USES MX08 COLLET, US $34.99 – Picture 5
DEAL! HPI PIONEER MX - MINI CHUCK - BT40 SHANK - BT40-HMX8-85 - USES MX08 COLLET, US $34.99 – Picture 0
DEAL! HPI PIONEER MX - MINI CHUCK - BT40 SHANK - BT40-HMX8-85 - USES MX08 COLLET, US $34.99 – Picture 1
DEAL! HPI PIONEER MX - MINI CHUCK - BT40 SHANK - BT40-HMX8-85 - USES MX08 COLLET, US $34.99 – Picture 2
DEAL! HPI PIONEER MX - MINI CHUCK - BT40 SHANK - BT40-HMX8-85 - USES MX08 COLLET, US $34.99 – Picture 3
DEAL! HPI PIONEER MX - MINI CHUCK - BT40 SHANK - BT40-HMX8-85 - USES MX08 COLLET, US $34.99 – Picture 4
DEAL! HPI PIONEER MX - MINI CHUCK - BT40 SHANK - BT40-HMX8-85 - USES MX08 COLLET, US $34.99 – Picture 5

Deal! Hpi Pioneer Mx - Mini Chuck - Bt40 Shank - Bt40-hmx8-85 - Uses Mx08 Collet

US $34.99

  • United States
  • Jan 30th
Open on mobile:
QR code
Made by HPI-Pioneer This is an MX-Mini Chuck in very good condition. Part Number: BT40-HMX8-85 There were originally 22 of this item available here.  Check the number above for the quantity currently available.  The last photo shows an overall view of part of our inventory of this item so you can see the general (very good) condition.  Please note that we also have another eBay listing with more of these chucks, but without the pull studs.  Click here to go to that listing. Click here to go to the HPI Pioneer catalog where more information about these chucks is available on pages 18 - 21. Specifications (from the HPI Pioneer catalog linked above): Shank: BT40 with Pull Stud Collet Type: MX08 (purchase separately from HPI-Pioneer...contact information is at the bottom of each page of the catalog linked above) Capacity: 3/8" (using an MX08 collet) Uses a rear draw bolt system (included, see photo #4 above) Collet Range: 0.125" - 0.394" Projection: 3.35" Diameter of Nose: 0.87" Length of Nose Straight Section: 1.42" Dynamically Balanced: G2.5 @ 20,000 RPM Coolant Through: Sealed up to 1500 PSI Coolant Pressure The holder or holders that ship(s) to you will be in similar condition as the one shown in the pictures.
Condition Used :
An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
Seller Notes “These collet chucks are in very good condition are ready to go to work with the addition of an MX8 style collet.”

Directions

Similar products from BT Tool Holders

BT40 Valenite Holder #BT40-F50-250 _ 1/2" ID _ BT 40 CNC VMC Toolholder

BT40 Valenite Holder #BT40-F50-250 _ 1/2" ID _ BT 40 CNC VMC Toolholder

  • Grand Rapids, Michigan, United States
  • Jan 30th
USED FRHENOSA BRAND BT50 STUB MILLING ARBOR 1-1/4" SMA 1.250"

USED FRHENOSA BRAND BT50 STUB MILLING ARBOR 1-1/4" SMA 1.250"

  • Fairfield, Iowa, United States
  • Jan 30th
Criterion NMTB 50 3.0" Integral Boring Head

Criterion NMTB 50 3.0" Integral Boring Head

  • Johnson City, New York, United States
  • Jan 30th
Precision Tool & Mfg. Co NMTB 50 4.625" Fine Adjust Boring Head

Precision Tool & Mfg. Co NMTB 50 4.625" Fine Adjust Boring Head

  • Johnson City, New York, United States
  • Jan 30th
BT40 TAPER DA300 COLLET CHUCK HOLDER

BT40 TAPER DA300 COLLET CHUCK HOLDER

  • Santa Clarita, California, United States
  • Jan 30th
BT40 ER32 COLLET CHUCK TOOL HOLDER BT40-CTA20-60

BT40 ER32 COLLET CHUCK TOOL HOLDER BT40-CTA20-60

  • Santa Clarita, California, United States
  • Jan 30th
REBUILT,BT 40 ANGLE HEAD, BT 40 , RIGHT ANGLE MILLING HEAD,

REBUILT,BT 40 ANGLE HEAD, BT 40 , RIGHT ANGLE MILLING HEAD,

  • Pinellas Park, Florida, United States
  • Jan 30th
(2) TECHNIKS PINZBOHR BT-340-32-60 TOOL HOLDERS, #6140250

(2) TECHNIKS PINZBOHR BT-340-32-60 TOOL HOLDERS, #6140250

  • North Springfield, Vermont, United States
  • Jan 30th
NEW 5/8" ERICKSON TG150 COLLET

NEW 5/8" ERICKSON TG150 COLLET

  • Cleveland, Ohio, United States
  • Jan 30th
NEW 1" ERICKSON TG150 COLLET

NEW 1" ERICKSON TG150 COLLET

  • Cleveland, Ohio, United States
  • Jan 30th
NOS NIKKEN Japan BT45 1" 25.4mm SHELL MILL ARBOR #BT45-FMD 25 4-45

NOS NIKKEN Japan BT45 1" 25.4mm SHELL MILL ARBOR #BT45-FMD 25 4-45

  • Perth, Ontario, Canada
  • Jan 30th
CAT45 3/8" END MILL TOOL HOLDER 45CVEM0375

CAT45 3/8" END MILL TOOL HOLDER 45CVEM0375

  • Santa Clarita, California, United States
  • Jan 30th
Precision Components BT50 x 1" Extended End Mill Holder ~9" gage Length

Precision Components BT50 x 1" Extended End Mill Holder ~9" gage Length

  • Flint, Michigan, United States
  • Jan 30th
BT50 SHOWA 1 1/2" END / FACE MILL HOLDER A910

BT50 SHOWA 1 1/2" END / FACE MILL HOLDER A910

  • Montville, Ohio, United States
  • Jan 30th
NEW PARLEC B30-11ER175 BT30 ER11 COLLET CHUCKS TOOL HOLDERS FOR CNC MACHINE SHOP

NEW PARLEC B30-11ER175 BT30 ER11 COLLET CHUCKS TOOL HOLDERS FOR CNC MACHINE SHOP

  • Oakville, Ontario, Canada
  • Jan 30th
HORIZONTAL VERTICAL MILL CNC TOOL HOLDER 1-1/4" CAPACITY

HORIZONTAL VERTICAL MILL CNC TOOL HOLDER 1-1/4" CAPACITY

  • La Puente, California, United States
  • Jan 30th
50 TAPER VERTICAL HORIZONTAL MILLING MACHINE CNC TOOL HOLDER 41 M5D 146 1" ARBOR

50 TAPER VERTICAL HORIZONTAL MILLING MACHINE CNC TOOL HOLDER 41 M5D 146 1" ARBOR

  • La Puente, California, United States
  • Jan 30th
50 TAPER VERTICAL HORIZONTAL CNC TOOL HOLDER 2" CAPACITY ENDMILL HOLDER

50 TAPER VERTICAL HORIZONTAL CNC TOOL HOLDER 2" CAPACITY ENDMILL HOLDER

  • La Puente, California, United States
  • Jan 30th
1-1/4" CAPACITY HORIZONTAL VERTICAL MILL CNC TOOL HOLDER ARBOR

1-1/4" CAPACITY HORIZONTAL VERTICAL MILL CNC TOOL HOLDER ARBOR

  • La Puente, California, United States
  • Jan 30th
RICHMILL BT 50 TAPER CNC TOOL HOLDER + 8" DIAMETER SAW CUTTER

RICHMILL BT 50 TAPER CNC TOOL HOLDER + 8" DIAMETER SAW CUTTER

  • La Puente, California, United States
  • Jan 30th

People who viewed this item also vieved

LYNDEX BT50 ER25 COLLET CHUCK MORE LISTED BT 50 ER 25 LOT C11603

LYNDEX BT50 ER25 COLLET CHUCK MORE LISTED BT 50 ER 25 LOT C11603

  • Dayton, Ohio, United States
  • Feb 26th
LYNDEX BT50 ER20 COLLET CHUCK MORE LISTED BT 50 ER 20 LOT C11598

LYNDEX BT50 ER20 COLLET CHUCK MORE LISTED BT 50 ER 20 LOT C11598

  • Dayton, Ohio, United States
  • Feb 26th
Kennametal carbide boring bar. .750" dia. 10" OAL. Not coolant thru.Nice shape.

Kennametal carbide boring bar. .750" dia. 10" OAL. Not coolant thru.Nice shape.

  • Enfield, Connecticut, United States
  • Mar 3rd
Boring Head

Boring Head

  • Rancho Cucamonga, California, United States
  • Mar 4th
DEVLIEG Microbore Carbide Tipped Insert Cartridge 3A6E

DEVLIEG Microbore Carbide Tipped Insert Cartridge 3A6E

  • Johnson City, New York, United States
  • Mar 6th
DEVLIEG Microbore Carbide Tipped Insert Cartridge 3B6E

DEVLIEG Microbore Carbide Tipped Insert Cartridge 3B6E

  • Johnson City, New York, United States
  • Mar 6th
No. 4 Morse Taper with No. 4 Jacobs Taper Jacobs Original

No. 4 Morse Taper with No. 4 Jacobs Taper Jacobs Original

  • Johnson City, New York, United States
  • Mar 8th
No. 2 Morse Taper with No. 6 Jacobs Taper Jacobs Original

No. 2 Morse Taper with No. 6 Jacobs Taper Jacobs Original

  • Johnson City, New York, United States
  • Mar 8th
ACME SF-64-34 Slip-Fixed Renewable Drill Bushings 1/2 x 1 x 2-1/8" Lot of 4 USA

ACME SF-64-34 Slip-Fixed Renewable Drill Bushings 1/2 x 1 x 2-1/8" Lot of 4 USA

  • Denver, Colorado, United States
  • Mar 9th
ACME SF-64-34 Slip-Fixed Renewable Drill Bushings 1/2 x 1 x 2-1/8" Lot of 2 USA

ACME SF-64-34 Slip-Fixed Renewable Drill Bushings 1/2 x 1 x 2-1/8" Lot of 2 USA

  • Denver, Colorado, United States
  • Mar 9th
BRIGGS & STRATTON 272631 GASKET-AIR LOT OF 17. NIB FROM OLD STOCK. (B8)

BRIGGS & STRATTON 272631 GASKET-AIR LOT OF 17. NIB FROM OLD STOCK. (B8)

  • Cincinnati, Ohio, United States
  • Mar 25th
NAPA GOLD AIR FILTER 6284. MB16

NAPA GOLD AIR FILTER 6284. MB16

  • Cincinnati, Ohio, United States
  • Mar 25th
JACOBS 32BA 0-3/8" DRILL CHUCK W/ KEY

JACOBS 32BA 0-3/8" DRILL CHUCK W/ KEY

  • Hellertown, Pennsylvania, United States
  • May 27th
Original ROHN 5-20 mm 3/4-Inch Chuck with Chuck Key

Original ROHN 5-20 mm 3/4-Inch Chuck with Chuck Key

  • Charlotte, North Carolina, United States
  • May 27th
KDK 153 Tool Holder

KDK 153 Tool Holder

  • Seal Beach, California, United States
  • May 29th
Brown & Sharpe Mfg Quick Change Tool Holder No. 49 Milling Taper Made in USA

Brown & Sharpe Mfg Quick Change Tool Holder No. 49 Milling Taper Made in USA

  • Sandia Park, New Mexico, United States
  • May 29th
ARC ABRASIVES - AO/Y BELTS 2" X 72" GRIT 100 (BOX 10PC) Sanding Belts

ARC ABRASIVES - AO/Y BELTS 2" X 72" GRIT 100 (BOX 10PC) Sanding Belts

  • Johnson City, New York, United States
  • May 31st
Polishing Kit w/ Locking Mandrel 1" 16 Piece

Polishing Kit w/ Locking Mandrel 1" 16 Piece

  • Mayer, Minnesota, United States
  • May 31st
500w 12000RPM ER11 Spindle Motor Mount Bracket 110VDC Engraver Cutter Marker CNC

500w 12000RPM ER11 Spindle Motor Mount Bracket 110VDC Engraver Cutter Marker CNC

  • Beijing, China
  • Jun 9th
600w 13200RPM ER11 Spindle Motor Mount Bracket 110VDC Engraver Cutter Marker CNC

600w 13200RPM ER11 Spindle Motor Mount Bracket 110VDC Engraver Cutter Marker CNC

  • Beijing, China
  • Jun 9th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies