NORTH COUNTRY GANSON ROSE EQUIPMENT Is offering a Delfield four drawer refrigerated equipment stand. Model # F2962C, Serial # 0509036000054. Stand is 120 volts, NSF approved and UL listed as a commercial equipment stand. Stand comes complete, ready to go with a self contained compressor, stainless steel construction and is on easy rolling castors. Stand has been in use right up to date and is in excellent working condition. Compressor cycles fine, cools quickly, drawers roll shut, seal tight. Table has two 12"x20" drawer openings and two 20"x20". Table measurement of 63"x32"x24" and weighs approx. 600 lbs. Table can be picked up or shipped from either of our 13440 or 14482 locations. There is no charge to ship this table to your commercial location. Free shipping does not include residential delivery or lift gate service. All of our equipment is cleaned and tested before shipping. All of our equipment comes with a 14 day guarantee from the time that you receive it. MODEL F2962C - 62' Refrigerated Lo-Profile Equipment Stand, 2 Section / 4 Drawers, Non-Spill Edges, Low-Profile Refrigerated Base Equipment Stands Good, Basic, Cold Storage Standard Features Exterior Top: is 18-gauge stainless steel with standard marine edges on all four sides. Corners are fully welded with smooth radii corners for easy clean out. Interior sub-top is made of 22-gauge 2BF stainless steel and is made integral with the top by injecting 2.00' of high density polyurethane foam between the exterior and interior tops. Refrigerated base interior back and bottom: is constructed of 22-gauge 2BF stainless steel. Exterior sides are constructed of 18-gauge stainless steel. Bottom and back are made of 22-gauge galvanized steel. Both left and right interior sides are formed of ABS plastic. The base is injected with 2.00' of high density polyurethane foam between the exterior and interior. Refrigerated base fronts are made of .095' thick ABS thermoformed plastic and backed up by ridged polyurethane water blown injection molded frames. The frames are an excellent thermo-break and superior structural material for fastening doors and drawers. Exterior machine compartment side is constructed of 18 gauge galvanized steel. Finished stainless steel ends: are standard. Louver, coil panel and drawer faces are all standard with stainless steel construction. Units are supplied with wall-mounted bracket and threaded rod to allow installation of the unit against a solid surface, for employee safety. Self-contained models: have a pre-wired condensing unit and a digital thermometer installed in the machine compartments (standard on right) louver panel and supplied with an 8' cord and plug. Interior refrigerated base cabinet will maintain 36 to 40 degree temperatures at 100-degree ambient room temperature. Refrigeration system: components are HFC-404A. Interior cabinet is cooled with mullion style blower coils (coated) mounted between each door/drawer section for very even air and temperature control. Electrical connections are 115V-60H- PH. Full Extension Plus drawer system: is a complete drawer system, which can operate independent of the unit it's installed in. Drawer system is sized to hold 12 x 20 x 4 ' deep hotel pans and smaller fractional pans. Drawer system is all stainless steel construction for maximum durability. Outer drawer track is made of 11-gauge stainless and held in place with 12-gauge up-right and cross supports. Drawer track rollers are made of Delrin' 100 NC-10 and do not require grease for operation. Intermediate tracks are removable without tools and house Delfield's 'anti-friction binary roller system'. Drawer boxes are designed with 'easy pan grip flanges'. Tracks are designed with a stay shut feature that holds the drawer gasket tight to the base front on uneven floors. Exterior drawer fronts are made of 22-gauge stainless steel; and an interior made of ABS plastic with formed in channels to house the snap-in dart style santoprene gasket. A 12-gauge galvanized brace is foamed in place to be an integral part of the drawer front assembly. Each drawer front is injected with 1.87' of high density polyurethane foam between the exterior and interior. Handles are recessed black plastic and held in with a positive lock system. Unit: is supported with two 14-gauge leg rails that run the entire length of the unit. Leg rails are welded to the bottom side of the unit and are tied together with two 12-gauge braces running front to back. Caster/leg boxes are welded inside the leg rail and 6.12' adjustable stainless steel legs are mounted as standard with (4) 5/16' bolts. This item will ship direct from us or the manufacturer for FREE to a commercial business address. You can also pick up for FREE at a Freight Warehouse. Residential deliveries will be $100 to your door (No inside delivery or uncrating.) Businesses without a loading dock will be subject to a lift-gate fee of $70.00, if you want or need liftgate. This item can be picked up at a local freight dock to avoid residential charges or lift-gate charges. Equipment can be slid into a pick-up bed off of the freight truck to avoid lift-gate charges. If you need either lift-gate service or residential delivery we will need to know before shipping, otherwise they will not deliver product and you will be subject to a $75.00 re-delivery fee. Check out my other items! Be sure to add me to your favorites list! NORTH COUNTRY GANSON ROSE TWO LOCATIONS TO SERVE YOU BETTER 100 RAILROAD ST. ROME N.Y. 13440 100 RIBSTONE RD. LEROY N.Y. 14482 Equipment Sales: Brian: 315-271-8407 Karl: 585-739-1153 ncequip@twcny.rr.com Quality Restaurant Supplies and Equipment at Always Affordable Prices Payment must be made by Paypal or made directly to us with your credit card. Payment must be made within three days of auction. Shipments made to the United States only. (If you are in Canada please call for shipping rate, a shipping surcharge will be assessed.) Buyer is to prepay all shipping costs. We strive hard to describe items properly, to ship quickly & to respond quickly, please honor your contract. Before shipping we will need a confirmed shipping address,contact phone number, contact name, name of business we are shipping to, PLEASE READ THE FOLLOWING TERMS AND CONDITIONS CAREFULLY BEFORE BIDDING. By bidding, you signify your agreement to these Terms and Conditions. PAYMENT OF ITEMS We accept Paypal, and all major credit cards by phone. No personal checks. We are a verified paypal user. Payment must be completed within 4 days after auction or sale close. If payment has not been paid by 10 days after close we will send a final notice then file a no-pay claim with ebay. If you live within New York, or pick your item up at our store, we have to charge sales tax. (8.00%) New York food service businesses are tax-exempt for some cooking equipment purchases, check with us. We cannot ship to a P.O. Box. SHIPPING, AND CLAIMS ALWAYS inspect all items for damage BEFORE accepting them from shipper. All new items are shipped in excellent condition without damage. Used equipment will be shipped as described. Most items will be delivered within 5 days after payment has been received. The buyer is responsible for filing claims with the shipping service if the buyer accepted the item from the shipping service. We will help out with any information you may need. REFUNDS AND RETURNS Returns must be approved first by North Country Ganson Rose before any item may be returned. Refunds will be made by Paypal, credit card, or check by our discretion. A 15% re-stocking fee will apply. All equipment is guaranteed, in stated working condition for 14 days from time time you have received it. Returns DO NOT include shipping. MISC If you have any problems or concerns, contact us and we will assist you. If you are considering leaving negative feedback please contact us first. We will give your situation priority service. We ship to the United States and Canada ONLY, no exceptions. Please read these terms and the advertisement details completely. If you have any Questions feel free to e-mail us at ncequip@twcny.rr.com or call us at 315-271-8407 or 585-739-1153 On Mar-31-15 at 14:13:47 PDT, seller added the following information:
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
