+ Post new Ad
DELTA AP400 Shopmaster 1-Horsepower 650 CFM Vertical Bag Dust Collector, 120/240, US $2500 – Picture 0
DELTA AP400 Shopmaster 1-Horsepower 650 CFM Vertical Bag Dust Collector, 120/240, US $2500 – Picture 0

Delta Ap400 Shopmaster 1-horsepower 650 Cfm Vertical Bag Dust Collector, 120/240

US $2500

  • San Diego, California, United States
  • May 29th
Open on mobile:
QR code
Offered here is my Delta model AP400 dust collector. It is used in good condition. Selling because I lost my home based work shop through divorce and I don't want to continue storing this equipment. Note: I don't have the 4inch flexible hose. These are available at low cost. I prefer local pick up as this is heavy (90lbs.) and costly to ship. However I can quote shipping cost if you're interested.

Directions

Similar products from Other Woodworking Equipment & Tools

Shopsmith Mark V Model 500 Rip Fence

Shopsmith Mark V Model 500 Rip Fence

  • Bloomington, Illinois, United States
  • May 29th
Shopsmith Sander Drums, Sanding Sleeves Table Insert

Shopsmith Sander Drums, Sanding Sleeves Table Insert

  • Bloomington, Illinois, United States
  • May 29th
Shopsmith Drum Sander / Router Fence Mark V 500

Shopsmith Drum Sander / Router Fence Mark V 500

  • Bloomington, Illinois, United States
  • May 29th
New in Box DeWalt Shaper / Jointer Set with Head and Two knife set

New in Box DeWalt Shaper / Jointer Set with Head and Two knife set

  • Cape May Court House, New Jersey, United States
  • May 29th
Rockler Shop Stand Risers 6"

Rockler Shop Stand Risers 6"

  • Houston, Texas, United States
  • May 29th
Senco Air Stapler 3/8" Model # JG 735 Serial # 771

Senco Air Stapler 3/8" Model # JG 735 Serial # 771

  • Woodstock, New York, United States
  • May 29th
OXALIC ACID, 2 lbs. RUST REMOVER, BLEACH TEAK DECKS, CLEAN GEMS, ROCKS, LEATHER

OXALIC ACID, 2 lbs. RUST REMOVER, BLEACH TEAK DECKS, CLEAN GEMS, ROCKS, LEATHER

  • San Pedro, California, United States
  • May 29th
MIRKA 8-INCH 80 GRIT 50 PIECE SANDING DISCS 9A-252-080

MIRKA 8-INCH 80 GRIT 50 PIECE SANDING DISCS 9A-252-080

  • Jacksonville, Florida, United States
  • May 29th
BRAND NEW Mirka Abranet 9A-232-120 Mesh Sanding Discs, 120 grit, 5-inch, 50/pk

BRAND NEW Mirka Abranet 9A-232-120 Mesh Sanding Discs, 120 grit, 5-inch, 50/pk

  • Bellevue, Washington, United States
  • May 29th
Two Cherries Chisels set of 4 boxed polished NEW unused ROCKLER wooden box

Two Cherries Chisels set of 4 boxed polished NEW unused ROCKLER wooden box

  • Crown Point, Indiana, United States
  • May 29th
Veritas 1" Aluminum Teon Cutter

Veritas 1" Aluminum Teon Cutter

  • Big Stone Gap, Virginia, United States
  • May 29th
5x SAWS INCL. SHARK 350mm, SANDVIK 225, TIMBER HANDLE & ALL STEEL HACKSAWS, NBL

5x SAWS INCL. SHARK 350mm, SANDVIK 225, TIMBER HANDLE & ALL STEEL HACKSAWS, NBL

  • NORMANHURST, NSW, Australia
  • May 29th
HEAVY DUTY MORTISING CHAIN SET & SPROCKET WIDTH 7/16" LENGTH 1.3/4 AND 36 LINKS

HEAVY DUTY MORTISING CHAIN SET & SPROCKET WIDTH 7/16" LENGTH 1.3/4 AND 36 LINKS

  • DELHI, DELHI, India
  • May 29th
HEAVY DUTY MORTISING CHAIN SET & SPROCKET WIDTH 1.1/2" LENGTH 1.3/4" & 36 LINKS

HEAVY DUTY MORTISING CHAIN SET & SPROCKET WIDTH 1.1/2" LENGTH 1.3/4" & 36 LINKS

  • DELHI, DELHI, India
  • May 29th
HEAVY DUTY MORTISING CHAIN SET & SPROCKET WIDTH 1" LENGTH 1.3/4 AND 36 LINKS

HEAVY DUTY MORTISING CHAIN SET & SPROCKET WIDTH 1" LENGTH 1.3/4 AND 36 LINKS

  • DELHI, DELHI, India
  • May 29th
HEAVY DUTY MORTISING CHAIN SET & SPROCKET WIDTH 9/16" LENGTH 1.3/4 AND 36 LINKS

HEAVY DUTY MORTISING CHAIN SET & SPROCKET WIDTH 9/16" LENGTH 1.3/4 AND 36 LINKS

  • DELHI, DELHI, India
  • May 29th
HEAVY DUTY MORTISING CHAIN SET & SPROCKET WIDTH 5/16" LENGTH 1.3/4 AND 36 LINKS

HEAVY DUTY MORTISING CHAIN SET & SPROCKET WIDTH 5/16" LENGTH 1.3/4 AND 36 LINKS

  • DELHI, DELHI, India
  • May 29th
HEAVY DUTY MORTISING CHAIN SET & SPROCKET WIDTH 5/8" LENGTH 1.3/4 AND 36 LINKS

HEAVY DUTY MORTISING CHAIN SET & SPROCKET WIDTH 5/8" LENGTH 1.3/4 AND 36 LINKS

  • DELHI, DELHI, India
  • May 29th
HEAVY DUTY MORTISING CHAIN SET & SPROCKET WIDTH 1/2" LENGTH 1.3/4 AND 36 LINKS

HEAVY DUTY MORTISING CHAIN SET & SPROCKET WIDTH 1/2" LENGTH 1.3/4 AND 36 LINKS

  • DELHI, DELHI, India
  • May 29th
HEAVY DUTY MORTISING CHAIN SET & SPROCKET WIDTH 1.1/4 LENGTH 1.3/4" AND 36 LINKS

HEAVY DUTY MORTISING CHAIN SET & SPROCKET WIDTH 1.1/4 LENGTH 1.3/4" AND 36 LINKS

  • DELHI, DELHI, India
  • May 29th

People who viewed this item also vieved

DELTA 10" Contractor's Table Saw 34-444 Instructions & Parts Manual 0829

DELTA 10" Contractor's Table Saw 34-444 Instructions & Parts Manual 0829

  • United States
  • Jan 30th
DELTA 10" Band Saw 28-195 Instructions & Parts Manual 0828

DELTA 10" Band Saw 28-195 Instructions & Parts Manual 0828

  • United States
  • Jan 30th
DELTA -Rockwell 17-900, 14-040 16.5" Drill Press Operator's & Parts Manual 0202

DELTA -Rockwell 17-900, 14-040 16.5" Drill Press Operator's & Parts Manual 0202

  • United States
  • Jan 30th
5/8" 60* DEGREE V-GROOVE ROUTER BIT, 1/2" SHANK, CARBIDE TIP, SIGN LETTER VEE

5/8" 60* DEGREE V-GROOVE ROUTER BIT, 1/2" SHANK, CARBIDE TIP, SIGN LETTER VEE

  • Vernon-Rockville, Connecticut, United States
  • Jan 30th
FREUD 38-452 Decorative Edge Double Fillet Ogee Router Bit, 1/4" Shk, Perfect

FREUD 38-452 Decorative Edge Double Fillet Ogee Router Bit, 1/4" Shk, Perfect

  • Mesa, Arizona, United States
  • Jan 30th
3/4" BOTTOM CLEANING STRAIGHT ROUTER BIT, 1/2" SHANK, CARBIDE TIP, CLEAR PLANING

3/4" BOTTOM CLEANING STRAIGHT ROUTER BIT, 1/2" SHANK, CARBIDE TIP, CLEAR PLANING

  • Vernon-Rockville, Connecticut, United States
  • Jan 30th
Woodpeckers Precision Woodworking Tools HDCG-PIV Hold Down Clamps

Woodpeckers Precision Woodworking Tools HDCG-PIV Hold Down Clamps

  • Decorah, Iowa, United States
  • Feb 14th
Lancaster 100-F-112 Pneumatic 2 way Frame Clamp

Lancaster 100-F-112 Pneumatic 2 way Frame Clamp

  • Morton, Illinois, United States
  • Feb 14th
Woodpeckers Precision Woodworking Tools KNCLAMP Individual Knuckle Clamp

Woodpeckers Precision Woodworking Tools KNCLAMP Individual Knuckle Clamp

  • Decorah, Iowa, United States
  • Feb 14th
Wood Veneer Zebrawood 6x20 20 Pieces Total Raw Veneer "EXOTIC" ZE1 2-11-15

Wood Veneer Zebrawood 6x20 20 Pieces Total Raw Veneer "EXOTIC" ZE1 2-11-15

  • Jeffersonville, Indiana, United States
  • Feb 15th
Wood like Synthetic Veneer 1.265m x 1m (or longer)

Wood like Synthetic Veneer 1.265m x 1m (or longer)

  • Christchurch, New Zealand, New Zealand
  • Feb 16th
2 STAGE THOMAS VACUUM VENEER PUMP 3-4 CFM 24"VAC WITH CAP-CORD & MOUNT OIL LESS

2 STAGE THOMAS VACUUM VENEER PUMP 3-4 CFM 24"VAC WITH CAP-CORD & MOUNT OIL LESS

  • Goodland, Kansas, United States
  • Feb 16th
Hitachi 728743 7-Inch Dry Cut Segmented Rim Diamond Saw Blade for Concrete an...

Hitachi 728743 7-Inch Dry Cut Segmented Rim Diamond Saw Blade for Concrete an...

  • Brownwood, Texas, United States
  • Feb 17th
Freud LU82M010 10-Inch 60 Tooth TCG Crosscutting and Ripping Saw Blade with 5...

Freud LU82M010 10-Inch 60 Tooth TCG Crosscutting and Ripping Saw Blade with 5...

  • United States
  • Feb 17th
Makita 792116-2 16-5/16-Inch 50 Tooth ATB High Speed Steel Combination Saw Bl...

Makita 792116-2 16-5/16-Inch 50 Tooth ATB High Speed Steel Combination Saw Bl...

  • Brownwood, Texas, United States
  • Feb 17th
Union 406 HS G8 Mill Lathe Bit bt16

Union 406 HS G8 Mill Lathe Bit bt16

  • Grand Junction, Colorado, United States
  • Mar 25th
ITW 3/8" HSS 6403 Alum 78 Mill Lathe Bit bt15

ITW 3/8" HSS 6403 Alum 78 Mill Lathe Bit bt15

  • Grand Junction, Colorado, United States
  • Mar 25th
GTD Greenfield 1/2-13 NC G H3 HS R3USA Mill Lathe Bit bt14

GTD Greenfield 1/2-13 NC G H3 HS R3USA Mill Lathe Bit bt14

  • Grand Junction, Colorado, United States
  • Mar 25th
Saburr-Tooth Set of 4 SANDING DISC’S (Flat Face) 7/8 Bore 5" Diameter

Saburr-Tooth Set of 4 SANDING DISC’S (Flat Face) 7/8 Bore 5" Diameter

  • Iron River, Michigan, United States
  • Jun 4th
10% Discount Saburr-Tooth Set of 4 Doughnut Wheels W/Holes 5/8 Bore 4" Diameter

10% Discount Saburr-Tooth Set of 4 Doughnut Wheels W/Holes 5/8 Bore 4" Diameter

  • Iron River, Michigan, United States
  • Jun 5th
NEW Narex 1/2" right and left skew chisels

NEW Narex 1/2" right and left skew chisels

  • Boise, Idaho, United States
  • Jun 6th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies