+ Post new Ad
DELTA DRILL PRESS DP600 OTHERS? FLOOR MODEL BASE & FLANGE 3 1/2 COLUMN, US $2600 – Picture 0
DELTA DRILL PRESS DP600 OTHERS? FLOOR MODEL BASE & FLANGE 3 1/2 COLUMN, US $2600 – Picture 0

Delta Drill Press Dp600 Others? Floor Model Base & Flange 3 1/2 Column

US $2600

  • Erie, Pennsylvania, United States
  • Jun 9th
Open on mobile:
QR code
 FROM PART-OUT OF DELTA FLOOR MODEL. LARGE CAST BASE AND POLE FLANGE. FITS 3 1/2" OUTSIDE DIAMETER PIPE. WILL INCLUDE 3     1/2-20 HEX BOLTS  FOR FLANGE TO BASE MOUNT  CLEANED UP ALL CRUD, OIL, ETC.   BUT NEEDS MINOR BRUSH, SAND,ETC. B4 PAINT. SEE FOTO W/RED X. NO DAMAGE OR WELDS ,BRAZE ,ETC. WILL FIT ANY DRILL PRESS OR OTHER MACHINERY OF VARIOUS MFG. WITH 3 1/2 PIPE . DOES NOT INCLUDE PIPE ALTHOUGH I HAVE IT. WEIGHS 80 POUNDS.  DIMENSIONS ;    18 WIDE BY 26 5/8 DEEP. BASE DP677 SEE FOTOS FLANGE?????? DP676   678   ?  WILL SHIP ONLY IN WOODEN BOX . N/C FOR BOX AND PREP FED EX HOME PROBABLY BASED ON 90 POUNDS MAY VARY SHIP COSTS . ALSO HAVE LISTED  A TOP TABLE FLANGE THAT DID NOT GO WITH THIS MODEL BUT COULD BE USED AS A ADD-ON FOR A TABLE TOP. OR WHATEVER . I MAKE MANY MACHINERY STANDS FROM PARTED OUT  DRILL PRESS BASES, COLUMN AND TABLES OR TOP FLANGE AND WOODEN TOPS. FOR BELT SANDERS GRINDERS ETC.  LOCAL P/U GLADLY ANY ? OR OTHER FOTOS   ASK...........

Directions

Similar products from Tools for Drilling & Tapping Equipment

Tapmatic 50 TC/DC

Tapmatic 50 TC/DC

  • Brooklyn, New York, United States
  • Jun 9th
LOT OF 21 HSS FRESHLY SHARPENED HAND TAPS 5/16"-24NF

LOT OF 21 HSS FRESHLY SHARPENED HAND TAPS 5/16"-24NF

  • Ellington, New York, United States
  • Jun 9th
RECOIL MASTER THREAD REPAIR KIT 5/16"-24 UNF

RECOIL MASTER THREAD REPAIR KIT 5/16"-24 UNF

  • Ellington, New York, United States
  • Jun 9th
LOT OF 26 HSS PULLEY TAPS #1-72 NF TO 3/8"-16 NC WINTER FYR THREADWELL

LOT OF 26 HSS PULLEY TAPS #1-72 NF TO 3/8"-16 NC WINTER FYR THREADWELL

  • Ellington, New York, United States
  • Jun 9th
LOT OF 6 HSS HEAVY DUTY HAND TAPS 1-1/16"-12 NS TO 1-5/8"-12 NS WHALLEY REGAL

LOT OF 6 HSS HEAVY DUTY HAND TAPS 1-1/16"-12 NS TO 1-5/8"-12 NS WHALLEY REGAL

  • Ellington, New York, United States
  • Jun 9th
Huge New lot varied sizes QTY HELI COIL INSERTS HELICOILS

Huge New lot varied sizes QTY HELI COIL INSERTS HELICOILS

  • Hastings, Michigan, United States
  • Jun 9th
LPS Tapmatic AquaCut Cutting Fluid 1 gal (Pack of 4)

LPS Tapmatic AquaCut Cutting Fluid 1 gal (Pack of 4)

  • USA, United States
  • Jun 9th
HELICOIL THREAD REPAIR KIT NO. 5521-7 SIZE 7/16-14 DRILL SIZE 29/64 NOS

HELICOIL THREAD REPAIR KIT NO. 5521-7 SIZE 7/16-14 DRILL SIZE 29/64 NOS

  • Buffalo, New York, United States
  • Jun 9th
Helicoil 4934 Master Thread Repair Set, Taps, Drills used in good shape

Helicoil 4934 Master Thread Repair Set, Taps, Drills used in good shape

  • Brick, New Jersey, United States
  • Jun 9th
Cleveland C00907 Ezy-Out 6 Piece Screw Extractor Set (Pack of 1)

Cleveland C00907 Ezy-Out 6 Piece Screw Extractor Set (Pack of 1)

  • American Fork, Utah, United States
  • Jun 9th
DELTA WALKER TURNER BOICE CRANE OTHERS DRILL PRESS TABLE OR BASE FLANGE

DELTA WALKER TURNER BOICE CRANE OTHERS DRILL PRESS TABLE OR BASE FLANGE

  • Erie, Pennsylvania, United States
  • Jun 9th
Scully-Jones Tap collet for 1" pipe tap

Scully-Jones Tap collet for 1" pipe tap

  • Columbus, Indiana, United States
  • Jun 9th
COMMANDER MULTI SPINDLE DRILL PRESS ATTACHMENTS TURRET SPINDLE SELECT-O-SPINDLE

COMMANDER MULTI SPINDLE DRILL PRESS ATTACHMENTS TURRET SPINDLE SELECT-O-SPINDLE

  • Toms River, New Jersey, United States
  • Jun 9th
Rutland End Mill Bit T-315160 New #52617

Rutland End Mill Bit T-315160 New #52617

  • Holly, Michigan, United States
  • Jun 9th
30pcs Helicoil Stainless Steel Thread Repair Insert Kit M8 M10 M12 #M1527 QL

30pcs Helicoil Stainless Steel Thread Repair Insert Kit M8 M10 M12 #M1527 QL

  • ??, ???, China
  • Jun 9th
Pneumatic Tapping Motor 400rpm for Pneumatic Tapping Machine M3-M12 New Y

Pneumatic Tapping Motor 400rpm for Pneumatic Tapping Machine M3-M12 New Y

  • Shenzhen,Guangdong, China
  • Jun 9th
Brownells Gracoil Drill Fixture

Brownells Gracoil Drill Fixture

  • Greenwood, Indiana, United States
  • Jun 9th
Bosch (Tapper / Tapping Gun) w/Automatic Reverse.Mod. 1462VS (0601462839) NICE!

Bosch (Tapper / Tapping Gun) w/Automatic Reverse.Mod. 1462VS (0601462839) NICE!

  • Allyn, Washington, United States
  • Jun 9th
CHUCKING REAMERS , GOOD CONDITION 48 PCS.

CHUCKING REAMERS , GOOD CONDITION 48 PCS.

  • Clinton Township, Michigan, United States
  • Jun 9th
HSS Precision Drill Bit Kit, 5 Bits, 1/2 Inch Shank-EXC

HSS Precision Drill Bit Kit, 5 Bits, 1/2 Inch Shank-EXC

  • Enterprise, Alabama, United States
  • Jun 9th

People who viewed this item also vieved

BROWN & SHARPE 13/32" ROUND SERRATED #22 COLLET

BROWN & SHARPE 13/32" ROUND SERRATED #22 COLLET

  • Fox Lake, Illinois, United States
  • Jan 30th
15/16" ROUND SERRATED #22 COLLET

15/16" ROUND SERRATED #22 COLLET

  • Fox Lake, Illinois, United States
  • Jan 30th
9/16" ROUND SEMI-SERRATED #22 COLLET

9/16" ROUND SEMI-SERRATED #22 COLLET

  • Fox Lake, Illinois, United States
  • Jan 30th
SET OF 2 ANILAM MICROPROCESSOR CONTROL SYSTEM UNIT

SET OF 2 ANILAM MICROPROCESSOR CONTROL SYSTEM UNIT

  • United States
  • Jan 30th
Charmilles Technologies EDM Reference Ball Kit NEW 202681470

Charmilles Technologies EDM Reference Ball Kit NEW 202681470

  • Washington, Missouri, United States
  • Jan 30th
ANILAM DVL-200 142-21 COMMANDO MICROPROCESSOR CONTROL SYSTEM

ANILAM DVL-200 142-21 COMMANDO MICROPROCESSOR CONTROL SYSTEM

  • United States
  • Jan 30th
45 Ton Baileigh HPB-45NC NEW PRESS BRAKE, Easy to use programmable NC controller

45 Ton Baileigh HPB-45NC NEW PRESS BRAKE, Easy to use programmable NC controller

  • Harrison, New Jersey, United States
  • Jan 30th
78 Ton Baileigh HPB-78NC NEW PRESS BRAKE, Easy to use programmable NC controller

78 Ton Baileigh HPB-78NC NEW PRESS BRAKE, Easy to use programmable NC controller

  • Harrison, New Jersey, United States
  • Jan 30th
75 Ton 120" Bed Chicago 810-C PRESS BRAKE, Automech CNC Back Gauge

75 Ton 120" Bed Chicago 810-C PRESS BRAKE, Automech CNC Back Gauge

  • Harrison, New Jersey, United States
  • Jan 30th
SUNNEN 2G-P28-1187VB HONING MANDREL 1.177" - 1.250" RANGE

SUNNEN 2G-P28-1187VB HONING MANDREL 1.177" - 1.250" RANGE

  • Cleveland, Ohio, United States
  • Jan 30th
SUNNEN 2G-P28-1125VB HONING MANDREL 1.115" - 1.187" RANGE

SUNNEN 2G-P28-1125VB HONING MANDREL 1.115" - 1.187" RANGE

  • Cleveland, Ohio, United States
  • Jan 30th
Gesswein Finishing Stones

Gesswein Finishing Stones

  • San Diego, California, United States
  • Jan 30th
5 x Bowl Shape 25mm End Stainless Steel Wire Brush 3mm mandrel For Rotary Tools

5 x Bowl Shape 25mm End Stainless Steel Wire Brush 3mm mandrel For Rotary Tools

  • shaoxing Zhejiang, China
  • Jan 30th
10 x Resin Cutting Wheels 38mm Discs Mini Rotary Tools Grinder With One Mandrel

10 x Resin Cutting Wheels 38mm Discs Mini Rotary Tools Grinder With One Mandrel

  • shaoxing Zhejiang, China
  • Jan 30th
Diamond coated 8" inch Flat Lap wheel Jewelry grinding polishing disk Grit 1500

Diamond coated 8" inch Flat Lap wheel Jewelry grinding polishing disk Grit 1500

  • ??, China
  • Jan 30th
Tarnow Engine Lathe No. TUJ-50 Gap Bed 21"/30"x 120" Inch/Metric 10HP (25922)

Tarnow Engine Lathe No. TUJ-50 Gap Bed 21"/30"x 120" Inch/Metric 10HP (25922)

  • Cincinnati, Ohio, United States
  • Jan 30th
Hendey Engine Lathe 18"/20-58" x 54" No. 18" 12 Spindle Speeds (25950)

Hendey Engine Lathe 18"/20-58" x 54" No. 18" 12 Spindle Speeds (25950)

  • Cincinnati, Ohio, United States
  • Jan 30th
Fuji CNC Turning Center with Auto Loader No. ANS-40T 32"Swing 2.6"Bore (19748)

Fuji CNC Turning Center with Auto Loader No. ANS-40T 32"Swing 2.6"Bore (19748)

  • Philadelphia, Pennsylvania, United States
  • Jan 30th
Plain Straight Tooth Milling Cutter 2-1/2 X 1/4 X 1 HSS

Plain Straight Tooth Milling Cutter 2-1/2 X 1/4 X 1 HSS

  • Milton Freewater, Oregon, United States
  • Jan 30th
Kuraki Horizontal Boring Mill 4" No. KBT-101 Facing Head 35"x67" Tbl 15HP(25851)

Kuraki Horizontal Boring Mill 4" No. KBT-101 Facing Head 35"x67" Tbl 15HP(25851)

  • Cincinnati, Ohio, United States
  • Jan 30th
36" King Vertical Boring Mill with Scanomatic Tracer Attachment (27097)

36" King Vertical Boring Mill with Scanomatic Tracer Attachment (27097)

  • Cincinnati, Ohio, United States
  • Jan 30th
CINCINNATI CYLINDRICAL GRINDER - BIG SWING (DIAMETER)

CINCINNATI CYLINDRICAL GRINDER - BIG SWING (DIAMETER)

  • Farmingdale, New York, United States
  • Jan 30th
EXPENSIVE HIGH PRESSURE HIGH TEMP VERTICAL AUTOCLAVE 650 PSI 600 DEGREE F

EXPENSIVE HIGH PRESSURE HIGH TEMP VERTICAL AUTOCLAVE 650 PSI 600 DEGREE F

  • Fountain Valley, California, United States
  • Jan 30th
#5852 - 10" Riser Block - Brown & Sharpe - Industrial Manufacturing Equipment

#5852 - 10" Riser Block - Brown & Sharpe - Industrial Manufacturing Equipment

  • Commerce Township, Michigan, United States
  • Jan 30th
TANNEWITZ MODEL B-11 - 38" AUTOMATIC TILTING BEVEL BAND SAW (OC85) PRICE DROP!

TANNEWITZ MODEL B-11 - 38" AUTOMATIC TILTING BEVEL BAND SAW (OC85) PRICE DROP!

  • Santa Ana, California, United States
  • Jan 30th
16? X 11? AMADA #HK400 SEMI AUTOMATIC HORIZONTAL BAND SAW W/MITER CUTTING

16? X 11? AMADA #HK400 SEMI AUTOMATIC HORIZONTAL BAND SAW W/MITER CUTTING

  • Watertown, Connecticut, United States
  • Jan 30th
DoAll 1" x 144" 3 Phase Horizontal Band Saw C-67

DoAll 1" x 144" 3 Phase Horizontal Band Saw C-67

  • Glassboro, New Jersey, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies