Dental Dmx Wireless Curing Light 1 Sec Cure Lamp Woodpecker I Led Style 2800mw

US $63.99

Beijing,CN, China
Aug 20th

Open on mobile:
QR code

Dental DMX Wireless Curing Light 1 Sec Cure Lamp Woodpecker I LED Style 2800mw 1.INTRODUCTION This product is used in fast solidification by lighting dental resin. It is a new generation of standard developed LED curing light, with humanity intelligent chip, the world advanced high intensity LED light and Li-on rechargeable battery. It can cure all the dental resin in the market nowadays, 2.PACKING LIST Main Body: 1Pc Light Source:: 1Pc Charge Base: 1Pc Adapter: 1Pc USB cable: 1Pc Light Protect: 1Pc Lens: 5pcs Test block:2pcs 3.TECHNICALPARAMETERS 3.1 Main Unit Battery Voltage DC3.7V Battery Capacity 1500mAh Wave Length 385515nm Light Density P1(9W) ≥ 2300mmw/cm² P25W≥1200mw/cm² Charging time 3 hours approx Weight 550g Packing size L205 x W109 x H77mm 3.2AC Adapter Rated input voltage AC100-240V 50/60Hz Output voltage DC 5V/MICRO USB Output current 1A 3.3 Operation Conditions Environment temperature +5 ℃ ~+40 ℃ Relative humidity 10%~80%RH Atmospheric pressure 50~106KPa 4.Use Method 4.1 Charge Put the curing light into the charger base, the blue light is shining one by one. When it is done, all of the blue lights are on.It takes about 3hours. Take care not to charge more than 7hours. Remove the adapter from the power supply after charging. Note: Can charge with the main unit socket also. When charging, theLED screen show CH; when done, the LED show FU 4.2 Operation Instruction 4.2.1Press M orTbutton to power on.Ifpress ON/OFF button, will light the Light source. 4.2.2 Set up Mode: P1(9W,≥2300mw/cm²) The actual measured value 2800mw/cm² P25W≥1200mw/cm² 4.2.3 Setup Time:P1--1/3/5s P2--6/10/15/20s 4.2.4Press ON/OFF button to light on the LED curing light. Ifsome wrong happened, the LED screen shows Er. 4.2.5 The main unit will power off by itselfif without any operation about 2minuts. Caution: the curing light can not be pointed at the patient's eyes while it is operating. If any accidents happen, go to the hospital immediately 5.Precautions 5.1 This machine is precise opticalequipment,it should use in the clean and dry place. 5.2 Remove adapter from the power supply after charge. 5.3 Do not touch the battery electrodes by any metal objects. 6.Cleaning & Sterilization 6.1 Clean Wipe the main unit with neutral detergent if needed. 6.2 Sterilization 6.2.1 The light source can be high pressure autoclaved. Autoclave it after each use with seal bag. 6.2.2Don't autoclave any parts(the main unit and charging base)other than those that can be subjected to autoclave sterilization. 6.2.3 Autoclave up to a max.135℃. It's recommended to autoclave for 20min at 121℃ or 15 min at 132℃. Notice: Don't use any solvent such as benzine and thinner for sterilization. 7.Transportation And Storage 1)Lay lightly during transportation, avoid strong shake 2) Storage condition: a. Ambiance temperature:-10~40℃b.Relative humidity:≤85% 8.Disposing product Please consult with dealer from whom you purchased it about waster despoil. 9.Warranty Manufacturer warrants its products to the original purchaser against defects in material and workmanship under normal practices of installation, use and servicing. This unit is guaranteed for its designated use against original defects in materials and workmanship for a period of 12 months from date of purchasing. For Buyers: The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item International Buyers Please Note: Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. Please check your country’s custom office to determine whether these additional costs will be prior to bidding / buying. Welcome to dental-cart!

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Brand	DMX
MPN	WD-81298
Country/Region of Manufacture	China
UPC	Does not apply