Dental Led Curing Light Cure Lamp Wireless Cordless Composite Resin 5/7/10w

US $39.90

Beijing, China
Jul 28th

Open on mobile:
QR code

Description D2: Introduction: Thank you for choosing D2 curing light unitThis unit is a kind of new type curing device which using the high-power, high—brilliance, pure blue light LED as light sourcewith the advance light guide rod 1.The unit is using the LED which has 430—485nm wavelength in the dental operation 2. LED Screen, easy to check. 3. When works it generates little heat and does not need a fans to cool the unit ,noiseless and without vibration 4. This unit has a Li large capacity batteryit can be used for a long one with full charging. 5.Because there are no cables connect to the handpieceit could be used very conveniently 6. Three Mode: “01”ModeGradually mode “02”ModeFlashing mode “03”ModeAll light mode 7. Automatically power downwhen the unit is standby and without pressing button for 8 minutesthis unit will be turned off automatically 8. low battery alertEvery time open the unit power if the voltage of the battery is lower than the set point, this unit will be alarm. Specification: Size…………………dia 22*175mm(unit) Safety kind……………Ordinary type Bnon—continuous service Ip40Class 2 Input voltage……………100—240V,50-60HZ(we will send the correct plug according to buyer’s location) Battery capacity………………·2000Mah Wavelength………430-485nm Intensity-………5W1800mwcm2 Solidification effect……20s>3mm (3W) 6s3mm (10W) Packing List: 1Main unit…………………l set 2Light guide rod…………1 pc 3 Battery………………………1 Pc 4 Charger……………………1 set 5 Adaptor…………………… 1 pc 6 Light cover plate……… 1 pc 7 User manual (English)…………………1 pc T4: T4 curing light adopts the principle of ray radiation to solidify the light-sensitive resin by shooting at it in a short time. This curing light with adjustable working time, working time visual, curing efficiency higher and intelligent zed charging stand. We have two colors for your reference. Feature: Four modes of working time: 10,20,30,40 seconds Working modes: Full power The battery can be replaced The optical fiber can be autoclaved to the high temperature and pressure. Automatic shut down function(120s no any operation) Technical Specifications: Power supply:``````````````````````````````````````````````Rechargeable Lithium battery Battery voltage and capacity: ``````````````````````` 4.2V/2000mAh Input of adapter:``````````````````````````````````````````100V to 240V~50Hz/60Hz Light intensity: ````````````````````````````````` ```````````1400MW/CM2 Light source: A. blue ray B. wave length:420nm-480nm Working condition: A.environment temperature:````````````````````````````````5 to 40 B.relative humidity:`````````````````````````````````````````````80% Consumption power````````````````````````8W protection type against electrical shock:````````````````Class Protection against electrical shock:```````````````````````type B Packing list: 1. Main unit x 1 2. Optical fiber x 1 3. Light hood x 1 4. Adaptor x 1 TH: Optimum polymerization is an important requirement for all light-cured material in order to consistently produce high-quality restorations. The polymerization light selected also plays a decisive role in this respect .Therefore ,we would like to thank you for having purchased Xlite. Xlite is a high-quality medical device which has been designed according to the latest standard of science and technology in compliance with the relevant industry standards. There operating instructions will help you safely start up the device, make full use of its capabilities and ensure a long service life. Precaution: The Xlite curing light intensity can result in build p of heat around the tip of the device . Prospective users are asked to take extra precaution to prevent direct contact with the skin ,oral mucous membrane ,or the gingiva during use. The device is for professional use only. Product Specifications: Product Specifications: Light source Broad spectral LED Wavelength range 385-515 nm Light intensity 1300mW/cm Battery Lithium-ion battery Total rentime with fully charged battery 30 min Dimensions Handpiece: max25.5mm220mm Charger base:65mm23mm Weight Handpiece 93G Charger base 190g Input Voltage 100-240VAC,50-60HZ Output Voltage 5vdc/1a Time to charge Discharged Battery Max 5 hours Operating Temperature +10- +35 +50- +70 Operating relative humidity 30% --- 75% Operating environment pressure 700hpa-1060hpa Safety: 1. The xlite Curing Light must be used in strict accordance with the following operating instructions. Discus Dental accepts no liability for any damage resulting from the use of this unit for any other purpose . 2. Prior to start-up of Xlite curing light make sure that the operating voltage started on the rating plate is compatible with the available mains voltage . Operation of the unit at a different voltage may damage the unit. 3. Exposure must be restricted to the area of the oral cavity in which clinical treatment is intended. 4. Use only chargers and adapters supplied by Shenghua Industry. The use of third part chargers and/or power adapter may result in damage to the unit and my be hazardous to users/patients. 5. Do not allow cleaning agents to directly enter the unit as this may cause premature failure . See maintenance and care. 6. Do not use on patients with a history of photo biological conditions including urticarial solaris or erythropoetic protoporphyria or who are on photosensitizing medications. 7. Suitable blue-light filtering safety goggles must be worn by patient and dentist during use. Curing Mode Guide Mode Fast mode Ramping mode Light intensity 1300mW/cm 100 to 1300mW/cm Times 15 sec 20 sec Curing Mode Swith Press and hold the switch one sec, light curing unit emit a short beep. And then release. This can be converted from one mode to another mode. Mode Fast mode Ramging Indicator Blue LED steady Blue LED flashing Charge Status Status Low battery Full Charging Indicator Green LED steady Green LED off Green LED flashing Packing List: a. Power adapter b. Curing light unit c. Charger base d. Instruction manual ST1: Feature: - 5W power light - 2 color lights: blue light for solidify resin material, white light is diagnostic function - Four working models: strong power, low power, flashing, gradually strong - Solidify time: 5s-40s select - Wireless, low battery alert, battery can be recharged - full charging to work for 10 seconds each time can be used continuously for more than 300 times - Brand new model match light meter Technology data: Working voltage: 100-240V 50-60Hz Wavelength: 420-480 nm Light power: more than 1500mw/cm2 Capability of battery: 2200mA/h3.7 V It can solidify 2-3mm deepness in a few seconds Packing list: 1 Main unit*1 2 Charging base*1 3 AC adaptor*1 4 Light shade*1 5 Light guide* 1 ST2: Feature: 1. Built-in light meter function 2 Wireless Inductive charging, longer life span 3 Four models to choose (STRONG LOW FLASHING GRADUALLY STRONG) 4 The handle covered by ANS painting 5 Can be used continuously more than 500times Technology data: Blue-ray illumination: 5W1200Mw/CM2 Capability of battery: 2200mA/h 3.7V

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	EAN	Non applicable
Power Input	100V to 240V, 50Hz/60Hz
510(K) Number For Dental Handpiece	K181691
Light source	Broad spectral LED
510(K) Number For Curing Light	K192233
Operating Temperature	+10- +35 +50- +70
510(K) Number For Scaler	K163414
Operating environment pressure	700hpa-1060hpa
FDA 510(k)	K192233
Handpiece Dimensions	max25.5mm220mm
FDA 510(k)#	K192233
Total rentime with fully charged battery	30 min
Relative humidity	30%~75%
Time to charge Discharged Battery	Max 5 hours
Fast Curing	1 Second / 1S
Input Voltage	100-240VAC,50-60HZ
Input Power	10VA
Weight	Handpiece 93G Charger base 190g
Color	Purple / White
Charger base	65mm23mm
Dimensions	25mm240mm
Battery	Lithium-ion battery
Wave length	450nm-455nm
Operating relative humidity	30% --- 75%
Power supply	rechargeable Lithium battery
Wavelength range	385-515 nm
Battery voltage and capacity	3.7V/1400mAh
Output Voltage	5vdc/1a
rotatable head	360 degree
Non-DomesticProduct	No
Power Output	DC5V/1A
Featured Refinements	Dental LED Curing Light
Optional working mode	standard and strong
Brand	Unbranded
Light intensity	High Power
MPN	Does Not Apply
Net weight	278g
Light Type	LED
Optional working time	1s, 3s, 5s, 10s, 15s, 20s
Intended Use/Discipline	Dental Laboratory, Dentistry
Battery mode	JW-Y-1.4