Dental Led Curing Light Cure Lamp Led Wireless Composite Resin Led-b/i Led 1s

US $39.90

Beijing, China
Aug 14th

Open on mobile:
QR code

Description D2: Introduction: Thank you for choosing D2 curing light unitThis unit is a kind of new type curing device which using the high-power, high—brilliance, pure blue light LED as light sourcewith the advance light guide rod 1.The unit is using the LED which has 430—485nm wavelength in the dental operation 2. LED Screen, easy to check. 3. When works it generates little heat and does not need a fans to cool the unit ,noiseless and without vibration 4. This unit has a Li large capacity batteryit can be used for a long one with full charging. 5.Because there are no cables connect to the handpieceit could be used very conveniently 6. Three Mode: “01”ModeGradually mode “02”ModeFlashing mode “03”ModeAll light mode 7. Automatically power downwhen the unit is standby and without pressing button for 8 minutesthis unit will be turned off automatically 8. low battery alertEvery time open the unit power if the voltage of the battery is lower than the set point, this unit will be alarm. Specification: Size…………………dia 22*175mm(unit) Safety kind……………Ordinary type Bnon—continuous service Ip40Class 2 Input voltage……………100—240V,50-60HZ(we will send the correct plug according to buyer’s location) Battery capacity………………·2000Mah Wavelength………430-485nm Intensity-………5W1800mwcm2 Solidification effect……20s>3mm (3W) 6s3mm (10W) Packing List: 1Main unit…………………l set 2Light guide rod…………1 pc 3 Battery………………………1 Pc 4 Charger……………………1 set 5 Adaptor…………………… 1 pc 6 Light cover plate……… 1 pc 7 User manual (English)…………………1 pc T4: T4 curing light adopts the principle of ray radiation to solidify the light-sensitive resin by shooting at it in a short time. This curing light with adjustable working time, working time visual, curing efficiency higher and intelligent zed charging stand. We have two colors for your reference. Feature: Four modes of working time: 10,20,30,40 seconds Working modes: Full power The battery can be replaced The optical fiber can be autoclaved to the high temperature and pressure. Automatic shut down function(120s no any operation) Technical Specifications: Power supply:``````````````````````````````````````````````Rechargeable Lithium battery Battery voltage and capacity: ``````````````````````` 4.2V/2000mAh Input of adapter:``````````````````````````````````````````100V to 240V~50Hz/60Hz Light intensity: ````````````````````````````````` ```````````1400MW/CM2 Light source: A. blue ray B. wave length:420nm-480nm Working condition: A.environment temperature:````````````````````````````````5 to 40 B.relative humidity:`````````````````````````````````````````````80% Consumption power````````````````````````8W protection type against electrical shock:````````````````Class Protection against electrical shock:```````````````````````type B Packing list: 1. Main unit x 1 2. Optical fiber x 1 3. Light hood x 1 4. Adaptor x 1 TH: Optimum polymerization is an important requirement for all light-cured material in order to consistently produce high-quality restorations. The polymerization light selected also plays a decisive role in this respect .Therefore ,we would like to thank you for having purchased Xlite. Xlite is a high-quality medical device which has been designed according to the latest standard of science and technology in compliance with the relevant industry standards. There operating instructions will help you safely start up the device, make full use of its capabilities and ensure a long service life. Precaution: The Xlite curing light intensity can result in build up of heat around the tip of the device . Prospective users are asked to take extra precaution to prevent direct contact with the skin ,oral mucous membrane ,or the gingiva during use. The device is for professional use only. Product Specifications: Product Specifications: Light source Broad spectral LED Wavelength range 385-515 nm Light intensity 1300mW/cm Battery Lithium-ion battery Total rentime with fully charged battery 30 min Dimensions Handpiece: max25.5mm220mm Charger base:65mm23mm Weight Handpiece 93G Charger base 190g Input Voltage 100-240VAC,50-60HZ Output Voltage 5vdc/1a Time to charge Discharged Battery Max 5 hours Operating Temperature +10- +35 +50- +70 Operating relative humidity 30% --- 75% Operating environment pressure 700hpa-1060hpa Safety: 1. The xlite Curing Light must be used in strict accordance with the following operating instructions. Discus Dental accepts no liability for any damage resulting from the use of this unit for any other purpose . 2. Prior to start-up of Xlite curing light make sure that the operating voltage started on the rating plate is compatible with the available mains voltage . Operation of the unit at a different voltage may damage the unit. 3. Exposure must be restricted to the area of the oral cavity in which clinical treatment is intended. 4. Use only chargers and adapters supplied by Shenghua Industry. The use of third part chargers and/or power adapter may result in damage to the unit and my be hazardous to users/patients. 5. Do not allow cleaning agents to directly enter the unit as this may cause premature failure . See maintenance and care. 6. Do not use on patients with a history of photo biological conditions including urticarial solaris or erythropoetic protoporphyria or who are on photosensitizing medications. 7. Suitable blue-light filtering safety goggles must be worn by patient and dentist during use. Curing Mode Guide Mode Fast mode Ramping mode Light intensity 1300mW/cm 100 to 1300mW/cm Times 15 sec 20 sec Curing Mode Swith Press and hold the switch one sec, light curing unit emit a short beep. And then release. This can be converted from one mode to another mode. Mode Fast mode Ramging Indicator Blue LED steady Blue LED flashing Charge Status Status Low battery Full Charging Indicator Green LED steady Green LED off Green LED flashing Packing List: a. Power adapter b. Curing light unit c. Charger base d. Instruction manual ST1: Feature: - 5W power light - 2 color lights: blue light for solidify resin material, white light is diagnostic function - Four working models: strong power, low power, flashing, gradually strong - Solidify time: 5s-40s select - Wireless, low battery alert, battery can be recharged - full charging to work for 10 seconds each time can be used continuously for more than 300 times - Brand new model match light meter Technology data: Working voltage: 100-240V 50-60Hz Wavelength: 420-480 nm Light power: more than 1500mw/cm2 Capability of battery: 2200mA/h3.7 V It can solidify 2-3mm deepness in a few seconds Packing list: 1 Main unit*1 2 Charging base*1 3 AC adaptor*1 4 Light shade*1 5 Light guide* 1 ST2: Feature: 1. Built-in light meter function 2 Wireless Inductive charging, longer life span 3 Four models to choose (STRONG LOW FLASHING GRADUALLY STRONG) 4 The handle covered by ANS painting 5 Can be used continuously more than 500times Technology data: Blue-ray illumination: 5W1200Mw/CM2 Capability of battery: 2200mA/h 3.7V Input Voltage: AC 110-240V 50-60Hz Wavelength: 420-480nm Light power: 1200-2000mw/cm2 Solidify depth: 5s/3mm Time select: 5, 10,15,20,25,30,35,40 seconds Battery standby time: 90 days Packing list: Main unit*1 Charging base*1 AC adaptor*1 Light shade*1 Light guide*1 Whiten tip *1 D8: Feature This product is used in fast solidification by lighting dental resin. It is a new generation of standard developed LED curing light, with humanity intelligent chip, World advanced high intensity LED light and Li-on rechargeable battery. It can cure all the dental resin in the market nowadays Its performance is further surpassing the halogen curing light's, which can solidify 4-5mm deepness in 8 seconds. Technical parameters Power voltage: AC100-240V 50-60Hz L.E.D Ortho light- super light intensity: 2000mw/cm2 Light guide for fast and powerful curing exposure times for optimal curing: 8s/ 6s/ 4s You can select the right time for the different types of material you wish to cure. Packing list 1. Curing light 2. High capacitance rechargeable battery 3. Charger 4. Operation manual 3S: Technical Parameters: Light Source: Broad Band LED; Wavelength Range: 385 - 515 nm; Light Intensity: > 2300mW / cm; Battery: Lithium-ion battery (total running time when the battery is fully charged: at least 80 minutes); Power Adapter Input Power: AC 100-240V 50 / 60Hz; Charging time: about 45 minutes; Size:Handle: 20 mm 240 mm; Charging stand: 63 mm 30 mm (all of the above are the largest size) Weight: Handle: 96 grams; Charging seat: 99 grams; Operating ambient temperature: + 10 - + 40(+ 50 °F - + 70°F); Operating relative humidity: 30% - 75%; Operating environment pressure: 700hPa - 1060hPa; Package Contents: 1 host handle; 1 charging base; 1 power adapter; 1 user manual. Operation and function description: The entire handle is only one button, light built-in button. 1. For the first time, charge the light curing handle first. Plug the USB cable of the charger into the USB port of the power adapter, plug the power adapter into the power socket, and finally Put the handle on the charging stand; or, insert the USB cable plug of the charging stand into the USB port of the computer, and then put the handle on the charging stand. Charging instructions are as follows: | Emerald Flashing | Battery charging; | Emerald green light | battery fully charged; handle removed the charging seat, the restoration of the previous working mode. 2. Working mode selection, by pressing the button for 2 seconds to release to switch the working mode. | Blinking Blue | Progressive mode, working time 10 seconds, light intensity 0-5 seconds from 0-1200mW / cm, 5-10 seconds 1200mW / cm. | Solid blue | Fast mode, working time 3 seconds, light intensity 2300mW / cm 3. Turn the light curing lamp on and off, press the button briefly. 4. Switch machine, in standby mode, press the button a short time to open the instrument; stop any operation for 60 seconds, into the ultra-low power standby. D5/D6: Features: 1. Brand New High Quality Curing Light. 2. Composes of high power LED, qualified fiber rod. 3. Noiseless; No libration; Generate little heat when working. 4. Low consumption of standby power with thirty days' standby time 5. Large capacity Li-battery can be used for a long one with full charging. 6. Plenty of fiber rods with very reasonable price on sale for your replacement. 7. Wireless/Cordless design without no cable connect to the unit which could be used very conveniently 8. It adopts the principle of ray radiation to solidify the light-sensitive resin by shooting at it in a short time. 9. Many brands' resin materials can be cured by this curing-light with optional working modes and lighting times. Technical: 1. Light source: blue light 2. Wave length: 420nm-480nm 3. Output intensity: 1100-1600mW/cm2; 5W LED 4. Power supply: rechargeable Lithium battery 3.7V/2000mAh 5. Input adapter: 100V to 240V~50Hz/60Hz (Available for global users.) 6. Safety kind: Ordinary type Bnon—continuous service Ip40Class 2 7. Working condition: environment temperature: 5-40; relative humidity:80% 8. The fiber rod can be autoclaved up to the tempreture134 °C / 273 °F & pressure 0.2Mpa. 9. Build-in light meter within the base 10. Digital LED screen display, clear operation. 11. BEEP at each 5-seconds to indicate remaining curing time 12. Various Curing Time: seven preset curing time 5/10/15/20/25/30/40 seconds. 13. Three Preset Programs: a. Fast mode: Full power all the time b. Soft 1 mode: Generally increasing power in first 5 seconds, then full power till the end. c. Soft 2 mode: Generally increasing power in first 5 seconds, then half power till the end. 14. Full supply of power can satisfy 10-second curing time for 200 times. 15. When running out of the battery, the unit can be operated directly with the switching power adapter. Packing List: Main Unit*1 Light Guide*1 Light Board*1 Charging base*1 100v-240v AC Adapter*1 English Operation Manual*1 FDA Statement The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, you can bid on this item only if you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item. Payment We accept PayPal payment ONLY, it is easy and safe. Payment should be sent within 7 (SEVEN) days of auction closing. All winning bidders whom won our item, please let me know your contact number after you made the full payment , we need this number to make sure you can receive your item in time, and also for emergency contact consideration. Feedback IMPORTANT INFORMATION ON OUR POLICY AND FEEDBACK Please leave me FIVE STAR POSITIVE feedback if you are satisfied with our items. We try to be fair and accurate with all of our product listings and descriptions. Please read each auction, bid, and sale carefully. We will appreciate it if you please email us before leaving negative feedback. If there is a problem, we can work together to resolve it. We strive to always be extremely fair and always try to work with reasonable customers. Negative feedback doesn't go away and should only be left as a last resort! We strive for positive feedback, harmonious relations and even friendships. We will always make every attempt possible to resolve issues if we made a mistake.(It happens). Please do not assume a mistake is intentional. Let us know if our service could be better!! Shipping International Shipping to worldwide. Handling within 24 business hours. Tracking info of your parcel is available. Returns could be accepted within 60 days after receipt of the item. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility.Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. It usually takes 15-45 business days to arrive by economy international shipping and 7-12 business days by express. The following form is for your reference. Returns Returns could be accepted within 30 days after receipt of the item Terms of Sale: Refund or replacement request is available only the requests within 1 week after parcel received & returning the item as the same condition as received. Please contact us to request a return authorization. Your name, auction number, and reason for return should be included in the email. All items returned must contain all original packaging materials.Please repack the item carefully. Items returned will be tested and a new replacement will be shipped to the buyer immediately when found defective. In the event that a suitable replacement is not available then a refund will be issued. Shipping, handling and insurance fees are non refundable. If the item is found non-defective, the item will be sent back to the buyer at buyer's expense. Items returned without RMA number will be refused and returned to the sender. Buyer is responsible for All Return Postage and Shipping Charges. Buyer is responsible for additional shipping costs for items that are returned refused and / or undeliverable. We do not accept any returns without an authorization number on the box or label it is being returned. Contact us We will reply all messages within 24 business hours and we are able to give you a quick response during the duty time. If we are off duty, please kindly be patient and give us a little more time, not just leave the neutral or negative feedback without communication. Every problem will be solved ASAP if you contact us! Copyright?Dreamland Dental Store,All rights reserved. FDA for Curing Light: 510(K) Number: K192233 Regulation Number: 21 CFR 872.6070 Product Code: EBZ FDA for Handpiece: 510(K) Number: K181691 Regulation Number: 872.4200 Classification Product Code: EFB Subsequent Product Code: EGS FDA for Scaler: 510(K) Number: K163414 Regulation Number: 872.4850 Product Code: ELC On Aug-14-21 at 13:07:10 PDT, seller added the following information:

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	EAN	Non applicable
Power Input	100V to 240V, 50Hz/60Hz
510(K) Number For Dental Handpiece	K181691
Light source	Broad spectral LED
510(K) Number For Curing Light	K192233
Operating Temperature	+10- +35 +50- +70
510(K) Number For Scaler	K163414
Operating environment pressure	700hpa-1060hpa
FDA 510(k)	K192233
Handpiece Dimensions	max25.5mm220mm
FDA 510(k)#	K192233
Total rentime with fully charged battery	30 min
Relative humidity	30%~75%
Time to charge Discharged Battery	Max 5 hours
Fast Curing	1 Second / 1S
Input Voltage	100-240VAC,50-60HZ
Input Power	10VA
Weight	Handpiece 93G Charger base 190g
Color	Purple / White
Charger base	65mm23mm
Dimensions	25mm240mm
Battery	Lithium-ion battery
Wave length	450nm-455nm
Operating relative humidity	30% --- 75%
Power supply	rechargeable Lithium battery
Wavelength range	385-515 nm
Battery voltage and capacity	3.7V/1400mAh
Output Voltage	5vdc/1a
rotatable head	360 degree
Non-Domestic Product	No
Power Output	DC5V/1A
Featured Refinements	Dental LED Curing Light
Optional working mode	standard and strong
Brand	Unbranded
Light intensity	High Power
MPN	Does Not Apply
Net weight	278g
Light Type	LED
Optional working time	1s, 3s, 5s, 10s, 15s, 20s
Intended Use/Discipline	Dental Laboratory, Dentistry
Battery mode	JW-Y-1.4