Dental Led Curing Light Lamp Handpiece Wireless Protective Mode Solidify Pro105

US $64.99

Shenzhen, China
Jul 3rd

Open on mobile:
QR code

INSTALLATION: • Insert light head into the curing light handpiece with a twisting motionEnsure that both the direct light source head and the light curing host are fully connected to their corresponding positions • Connect the connector to the USB Type-C charging line, and then connect the power supply. The magnet tail cap at the bottom of the host can be stably adsobed on other metal surfaces. • After switching on the power , insert the charging port or pull out the charging port, the machine will wake up automatically, and the host screen will light up • The main panel indicator light "orange" indicates that the battery is in charge, and the light "green" indicates that the battery is full, and the machine will automatically stop charging. • When the host is charged for one minute in an unused state, the screen will shut down automatically, and the battery will still be charged until the battery is full • The battery is not fully charged prior to shipment. Please charge the battery for a minimum of 4 hours prior to first use • To check the battery, press and hold the time switch for 4 seconds, display screen will show: a.) 4.2 – 3.7- Battery is normal b.) Lo- Battery is low • When battery is low, curing light circuit will automatically compensate for power output or turn the light off. Always recharge the curing light when the battery is low Lo • Direct charging option from transformer for easy transportation and mobility OPERATION: • Turn on the curing light with on/off switch • his machine has 3S high power. full RAMP PULSE 3'+3'Five working modes. The default mode is (full power) and the default time is 10 seconds. • Press and hold the time button for 0.1 seconds to select the time.Only three time modes of FULL RAMP PULSE can be selected, which are 05 10 15 20 25, respectively. • Long press mode button 0.5 seconds to unlock, mode selection can be made, when no operation 30S automatically unlock, and long press mode button 0.5 seconds to unlock. • Every change of time or mode, there will be a ‘beep’ sound. The curing light will keep the last program selected in memory • Put on the disposable curing light sleeve to cover the whole curing light for cross-infection control. Then put on the light protective shield and light head protective ring, the curing light is ready for use • Remove and dispose of the curing light sleeves after every patient • Curing light will automatically turn off if not in use for 1 minute SPECIFICATION: Power supply:Input: AC 100-240V, 50/60Hz Output :DC 5V/1A Intensity High: 1600 mw/cm Battery: 3.6V, 2600 mAh (9.36Wh) Handpiece dimension: 3.0 cm x 24 cm . Packing List: Main unit of the LED x1 Protective light shield x1 Transformer (100 -240V) x1 USB Type-C Chrging line x1 Instruction manual x1 General Introduction: This curing light has the advantages of adjustable working time, visible working time and high curing efficiency. When the curing light is charging, the charger socket can display the charging status. (Charging: the indicator light is on, Charging over: the indicator light is off. The curing light is removed from the charging socket: Indicator Light begins to flash). When this machine is working, every 5 seconds the buzzer will make a sound of “di” to remind you, at the same time, the screen displays the remaining work time. Nonworking time, this machine can automatic shutdown without any operation in 120 seconds to save electric power. With this machine off, press any key to turn on the curing light. STATEMENT :The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item. FDA Statement The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, you can bid on this item only if you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item. Seller name:Usadental City,State:SHENZHEN,China Telephone number:0755-67530389 Payment We only accept paypal payment,it is easy and safe. and for any other payment forms,please kindly contact us in advance. Shipping The goods you odered will be posted out in the second working day after the paymet has been made. (We will inform you via email if any delay occured due to holiday events. General shipping time is between 7-12 working days. (After the shipping started, the order will be monitored and the track of the item will be posted on paypal) Contact Us If you have any query or dissatisfaction, please contact our customer service via eBay Message Center only. If you contact us via eBay message, we'll reply you within 24 working hours. Thank you so much for your purchase. Wish you have a nice day! : -) Re: K192233 Trade/Device Name: LED Curing Light Regulation Number: 21 CFR 872.6070 Regulation Name: Ultraviolet Activator for Polymerization Regulatory Class: Class II Product Code: EBZ Dated: December 7, 2019 Received: December 16, 2019

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Model	PRO105
MPN	Does Not Apply
Country/Region of Manufacture	China
Light Type	LED
Lithium battery capacity	1500mAh
Brand	Unbranded
Featured Refinements	Dental LED Curing Light
Intended Use/Discipline	Dental Laboratory, Dentistry
UPC	781903368687