Dental Porcelain Ceratec Opaque 6 Btl 180 Grs Total

US $580

Fort Lauderdale, Florida, United States
Jun 2nd

Open on mobile:
QR code

US DENTAL DEPOT Item Description Shipping Info Payment Info DENTAL PORCELAIN CERATEC OPAQUE 6 btl 180 grs Total DENTAL PORCELAIN CERATEC OPAQUE 6 btl 180 grs Total CERATEC High Fusion OPAQUE Porcelain Powder 30gr per Bottle High Fusion porcelain with fine grain powder. ( Very similar to Ceramco 3 ) FDA approved - CE certified - al ISO certifications !! (Picture is for ilustration only, and belongs to This 6 bottels kit will include the shades of your choice from : ( let us know what colors you need us to ship using Ebay comunication center ) 30grs bottles - Brand New, Never Opened, Factory Sealed A1-A2-A3-A3,5-A4 B1-B2-B3 C1-C2-C3-C4 D2-D3-D4 General Caracteristics Can be mixed with Ceramco 3, Noritake ex-3 , Sinspar, Excelsior, Excelxco, C-mix etc Can be fired/ Baked with Ceramco 3, Noritake ex-3 , Sinspar, Excelsior, Excelxco, C-mix etc ( can use the same temperatures you are used to ) Mix and Match, powder by powder with Ceramco 3 Easy to build up Compatable with the most common non precious alloys like Argeloy, Argeloy NB, Super-1 Super-3, Smart-Bond , Smart-Bond2, Neoloy, Rexilium 3, Rexilium 5, NPX-3. CERATEC is easy to use for beginner and expert ceramist with all of the properties and porcelains necesary for the best art work. Designed to easily replicate the beauty and vitality of natural teeth. The extremely stable CTE provides compatibilty with a broad range of alloys (14.0 - 14.8 at 500C) Permits multiple firing while maintaining form and shade integrity. Achieve accurate shades right out of the bottle with only the basic powders. Enamel or Incisal: Enamel are slightly less translucent than Incisals ( more spaceous ). So, for those technicians that are used to build the porcelains covering their dentine powder with a complete layer of Incisals powder, then the one to be used by them should be INCISALS. In the other hand, the technician is used to place Enamel powder just on the first third of the crown. Then the proper powder to be used should be ENAMELS. In that case, you are using ENAMELS, and you see your fired porcelain, appearing a little bit lacking of color or slightly turned to gray, is not because of the color of the porcelain. It is just the Enamel layer, that went too high over the second third of the preparation / crown / dentine powder. Buttom line. more translucent is the Incisal powder, more opaceous is the Enamel powder. For technicians tha use less Enamel, then the powder is Enamel. For technicians tha covers the crown with Incisal, then the powder is Incisal. Maintain shade, even at varied thicknesses becomes simple. Minimum Shrinkage, great translucency and color depth. Technical Data: - Radioactivity There are no radiactivity elements in CERATEC porcelains composition. The total radioactivity is less than 0.2 Bq-g-1 of U238. - Toxic or harmful elements: CERATEC porcelains are completely free of Lead, Uranium, Antimony and Cadmium. - Flexual Strength: 125 MPa with s standard deviation of 10 Mpa. - Chemical Solubility: 55 ug/cm2. - Adhesion to alloys: 36.8 MPa as tested with CERATEC 1 non-precious alloy. - Glass Transition temperature: Between 480-500 oC for all CERATEC porcelains - Specific Gravity: 2.7 g/ml Recommended alloy SMART-BOND See instructions and videos at: USDENTALDEPOT search " Ceratec Presentation " Manufacturer: DENTAL PORCELAIN CERATEC OPAQUE 6 btl 180 grs Total Model: We will ship your item within 24 hours after payment has been received. Mon-Fri