Desco 66055 Statfree T2 Premium Dual Layer Rubber Antistatic Mat Top Kit New

US $9500

Oviedo, Florida, United States
Jun 6th

Open on mobile:
QR code

Statfree® Type T2 Benchtop Mats have superior heat-, chemical-, and wear-resistance. All feature two layers of 100% nitrile butadiene industrial-grade rubber; the top layer is dissipative and the bottom layer is conductive. Dark gray kit. http://desco.descoindustries.com/DescoCatalog/WorksurfaceMats/Rubber/StatfreeT2DualLayerDissipative/T2MatKits/66055/#.VotLsPkrIuU https://descoesd.wordpress.com/2012/06/12/descos-statfree-t2-mats-outlast-the-competition/ Copied from website Dissipative Dual Layer Rubber Material Provides a worksurface that does not generate a static charge and will control the discharge rate from all conductors (including ESD susceptible items) that are placed on the surface. Color (1 x 106 to < 1 x 109 ohms Rtt) Top Layer - Limited Lifetime Warranty Meets ANSI/ESD S20.20 worksurface required limit and recommendation of ANSI/ESD S4.1 for contact with ESD susceptible items. Electricals will not drift for the life of the mat. Black Side (<1 x 104 Rtt) Bottom Layer - Limited Lifetime Warranty The dedicated conductive layer reduces the resistance to ground (Rtg) from the top of the surface to the groundable point ground and allows the mats to be used with ESD workstation monitors. Electricals will not drift for the life of the mat. High Strength Nitrile Rubber Compound Designed to withstand abrasion, stretching, and tearing and may be used in soldering applications with flux and other chemicals. Click Here for Chemical Resistance Chart Ultraviolet (UV) Stabilizer Additives Stabilizes color retention, insures ESD performance over time and eliminates surface layer deterioration resulting in cracking when the product is flexed. Non-Humidity Dependence Provides consistent electrical performance regardless of ambient humidity Lot Traceability Information Provides tracking information for lifespan of the product and to ensure quality control. Includes 14213 Ground Cord Lead-free RoHS compliant Made in the United States of America This item is stocked in Canton, MA "The most important functional consideration for worksurfaces is the RTG resistance from the top of the surface to the groundable point." ANSI/ESD S20.20 Table 1 recommends a requirement of less than 1 x 10E9 ohms. "If Charged Device Model damage is a concern then setting a lower resistance limit should be considered. Typically, 1 x 10E6 ohms." "Durability factors that should be considered are hardness, abrasion resistance, tear resistance, etc. Worksurfaces may require special heat resistant materials. Light reflection may be an important ergonomic consideration." (Ref: TR 20.20 section 5.3.1). Due to variations in computer monitor displays, color shown may not be exact. For true accurate color, please email Service@Desco.com to request an actual sample.