Digital Lcd Display Pwm 60a Dc Motor Speed Controller Wireless Remote Control

US $25.08

ShenZhen, China
Aug 23rd

Open on mobile:
QR code

Home Arduino Module Sensor Chips About Us Specifications: 1-2-3-4-5-6-7-8-9 E function settings are as follows: Slow start time setting function 1: 000-100 slow start to 100% speed time is adjustable between 0-10 seconds. The default is 1 second. Slow stop time setting function 2: 000-100 slow stop time is adjustable between 0-10 seconds. The default is 1 second. Speed lower limit setting function 3: 000-080 the minimum speed is adjustable between 0-80% and is less than the maximum speed setting value. The default is 0. Speed upper limit setting function 4: 000-100 the maximum speed is adjustable between 0-100% and is greater than the minimum speed setting value. The default is 100%. Acceleration/deceleration value setting function 5: 001 002 005 010 015 020 025 the speed changes by 1%, 2%, 5%, 10%, 15%, 20% and 25% each time the acceleration/deceleration key is pressed. Motor running time setting function 6: 1 second minimum -99 hours 59 minutes 59 seconds maximum. The default is 99 hours 59 minutes 59 seconds. Motor stop time setting function 7: 1 second minimum -99 hours 59 minutes 59 seconds maximum. The default is 99 hours 59 minutes 59 seconds. Motor start-stop cycle times function 8: adjustable between 1-999 times. The default is 999 times. Limit mode selection Function E: E1 Infinite position Default infinite position E2 Press to start the motor to rotate forward and to the positive limit, the motor to stop, press to start to reverse E3 Press to start the motor forward rotation, forward rotation to positive limit motor reverse rotation, reverse rotation to negative limit motor stop E4 Press to start the motor forward rotation, forward rotation to the positive limit, the motor reverse rotation, cyclical work Manual and automatic mode selection Press the MENU button 1 to display 0 to enter the manual and automatic mode selection 1 is manual mode 2 is automatic mode Press the plus and minus keys to switch Press RUN/STOP to save and exit Item Name: Motor Speed Controller Input Voltage: DC 10V-55V (the specific voltage should be equal to the rated voltage of the motor) Output Voltage: Linear Under Load Instantaneous Current: 60A Continuous Current: within 40A Type of Speed Regulation: Flow Regulation Speed Adjustment Method: Press +/- Wireless Remote Control: Support Timing: Yes Slow Start and Slow Stop: Can Be Set Speed Digital Display: 0-100 Percentage Table Speed Adjustment Range: 0-100% Control Frequency: 15KHZ Battery: 1 x CR2032 Button Battery(not Included) Wiring Type: Fence Type Terminal Block Support Motor: Brush Motor Module Size: 14.8cm x 9.5cm x 3.6cm Panel Size: 14.2cm x 8.8cm Note: The input must be divided into positive and negative. The input voltage must be equal to the rated voltage of the motor (within 10-55V) For example, the rated voltage of the motor 12V is input to the governor 12V, and the rated voltage of the motor 36V is input to the governor voltage 36V. Input 220V will burn Package Includes: 1 x Motor Speed Controller 1 x Remote Payment Shipping Refund Payment We accept PayPal only. But we only Accept your Ebay Address,Please Make sure it's 100% right. Payment must be received in 5 business days of auction closing. Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order. Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched. Shipping Fill your shipping info Refund All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can't take a refund. If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it. If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Brand	Unbranded
Herstellernummer	nicht zutreffend
MPN	Does Not Apply
Marke	Markenlos
Power Source	DC
Marca	- Senza marca/Generico -
Voltage	DC10-55V 60A
Marque	- Sans marque/Gnrique -
Model	Motor Speed Controller
Numro de pice fabricant	Non applicable
Modified Item	No
Remote control frequency	15KHZ
Country/Region of Manufacture	China
Item Name	Motor Speed Controller
UPC	Does not apply
Continuous current	within 40A
EAN	Does not apply
instantaneous current	60A
Input Voltage	DC 10V-55V
Speed Adjustment Range	1-100%
Output Voltage	Linear Under Load