Digital Lightwave NIC Plus & OEM Case, US $4123 – Picture 0

Digital Lightwave NIC Plus & OEM Case, US $4123 – Picture 1

Digital Lightwave NIC Plus & OEM Case, US $4123 – Picture 2

Digital Lightwave NIC Plus & OEM Case, US $4123 – Picture 3

Digital Lightwave NIC Plus & OEM Case, US $4123 – Picture 4

Digital Lightwave NIC Plus & OEM Case, US $4123 – Picture 5

Digital Lightwave NIC Plus & OEM Case, US $4123 – Picture 6

Digital Lightwave NIC Plus & OEM Case, US $4123 – Picture 7

Digital Lightwave Nic Plus & Oem Case

US $4123

Frederick, Maryland, United States
Jan 29th

Open on mobile:
QR code

The Digital Lightwave NIC Plus Network Information Computer is a scalable solution for verifying and qualifying the performance of today's multiprotocol global communications networks. NIC Plus is the most compact and cost-effective DS0/64K through OC-192/STM-64 including G.709 OTN (OTU 1 and OTU 2), GigE, ATM, POS, and OSA diagnostic platform on the market. With a flexible software/firmware-based architecture, the scalable NIC Plus combines in a single platform the multitude of traditional hardware-based test sets required to install, maintain, and monitor high-speed multi-protocol networks. The NIC Plus is designed to grow as your network grows, and as technologies change. An intuitive touch-sensitive GUI enables technicians of any experience level to effectively operate the NIC Plus, minimizing training costs. The NIC Plus is fully compatible with the entire NIC product line. The NIC Plus can also be configured with the new single-board optical multirate modules, providing equipment manufacturers and service providers with a cost-effective, high-speed, high-density solution for OTN as well as 10G and 2.5G interfaces in a single portable platform. OTN Testing All G.709 OTN rates up to 112G with FEC generation and analysis OTU4, OTU3, OTU3e1/OTU3e2, OTU2f/OTU1f, OTU2e/OTU1e, OTU2, and OTU1 OTL layer testing at 40/100G rates; unframed BERT testing for all rates ODU multiplexing with simultaneous generation and analysis at all levels; ODU0 and ODUflex (support is line rate dependent) GFP-T/GFP-F/Ethernet, Fibre Channel, SONET/SDH, PRBS and Null Client mappings (support is line rate dependent) Multi-Channel generation and analysis for OTU1 and OTU2 Complete OTN overhead manipulation and analysis with byte capture, including trace and MSI bytes Intrusive and non-intrusive Pass Thru mode with byte and error/alarm overwrite Error/alarm generation with periodic burst insert and analysis OPU/client justification offset generation and analysis at all layers Service Disruption and Round Trip Delay measurements at any ODTU level PDH/T-Carrier Testing 1.5M/2M/34M/45M/139M - DS1/E1/E3/DS3/E4 Bulk and multiplexed mapping structures; Fractional E1 and 56K/64K Fractional DS1 testing Drop and insert from SONET/SDH External Add/Drop line interface modes Performance monitoring per G.821, G.826, and M.2100 Signal level and line frequency generation and analysis Service Disruption and Round Trip Delay measurements Simultaneous and independent interface testing; dual DS1/E1 Fibre Channel Testing All Fibre Channel rates up to 11.3G OTU1f/OTU2f and 1/2/4/8/10G Unframed BERT testing for OTU1f/OTU2f, 8G, 10G Switch Fabric and Name Server login Test stream with user defined addressing, frame parameters, frame size, pattern and rate Error and alarm generation and analysis Primitive sequence generation RFC 2544 like Throughput/Latency/Frame Loss/Performance test Buffer-to-buffer credit / flow control analysis Per-port and per-stream results include: port utilization, counts, and per-stream latency statistics Service Disruption measurement for OTU1f/OTU2f, 10G Jitter/Wander Generation and Analysis OTU1 (NIC+) 2.5G-155M SONET/SDH (NIC+) PDH/T-Carrier (NIC and NIC+) Serial Interface Testing RS-530/RS-232 testing with synchronous and asynchronous operation DCE and DTE emulation 25-pin D-type connector Ethernet/IP Testing All Ethernet rates up to 103G 100G, 40G, OTU2e/OTU1e, 10G LAN, 10G WAN, 1G, 100M, and 10/100/1000BASE-T PCS layer testing at 40/100G rates; unframed BERT testing 32 IPv4/IPv6 test streams with independent addressing, traffic parameters, frame size (up to 16k), pattern, and rate mode (40/100G IPv4 only) Y.1564; RFC 2544 Throughput/Latency/Frame Loss/Back to Back Burst Performance test VLAN and MPLS tags up to 4 levels with QoS statistics (40/100G VLAN only) Per-port and per-stream results include: port utilization, counts, packet size distribution, and per stream latency and jitter statistics Service Disruption Measurement SONET/SDH Testing All SONET/SDH rates up to 40G STM-256/STM-64/STM-16/STM-4/STM-1/STM-0/STM-1e/STM-0e; OC-768/ OC-192/OC-48/OC-12/OC-3/OC-1/EC-3/EC-1 Serial and multi-lane 40G interfaces; STL-256.4 multi-lane logical layer testing SONET mappings: STS-768c, STS-192c, STS-48c, STS-12c, STS-3c, STS-1, VT-6, VT-2 and VT-1.5 (support is line rate dependent) SDH mappings: AU-4-256c, AU-4-64c, AU-4-16c, AU-4-4c, AU-4/C-4 and AU-4/AU-3 C-3/C-2/C-12/C-11; VCAT/LCAS (support is line rate dependent) PRBS, PDH/T-Carrier, and GFP-T/GFP-F/Ethernet clients; unframed BERT testing for all rates (support is line rate dependent) All Path Testing™ (APT) 10G and below - simultaneous testing of all HP/STS containers/SPEs Complete SONET/SDH Overhead and trace manipulation/analysis with byte capture Intrusive and non-intrusive Pass Thru mode with byte and error/alarm overwrite Line frequency offset generation and analysis Service Disruption, Round Trip Delay measurements, and APS Testing Performance monitoring statistics Optical Spectrum Analyzer Wavelength Range: C-band 1528.77 to 1562.23 nm, L-band 1568.77 to 1604.03 nm 50 GHz Absolute Channel Spacing; 85 C-band/L-band channels Maximum Input Power (all channels): 23 dBm, Single Channel: C-Band: -10 to -40 dBm/L-band:-10 to -35dBm Absolute Channel Power Accuracy (include PDL): ±0.7db Power Measurement Repeatability (for fixed polarization): ±0.1 dB Polarization Dependent Loss: <0.3 dB Absolute Wavelength Accuracy: ±60 pm OSNR Measurement Range: 10-25 dB (dependent on channel input power, noise floor, and filter isolation) OSNR Accuracy: ±1.5 dB (noise level >= -50 dBm, L-band noise level >= -45 dBm) Noise Floor: -60 dBm Power Measurement Resolution: 0.1 dB

Condition	Used : An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
Seller Notes	“Lightly used and in like new condition. Comes with carrying case, power cord and information packet. Please see pictures provided. Please contact us with any questions that you may have.”