Digitrak Digital Control Mark Iii Directional Drill Dci Locating System

US $1100

United States
Jan 30th

Open on mobile:
QR code

Digitrak Digital Control Mark III Directional Drill DCI Locating System Product Description From the Manufacturer The DigiTrak Locating System is used during horizontal directional drilling operations for locating and tracking the transmitter within the tool. This manual provides detailed information about the DigiTrak System and how to use it. The main system components are the Receiver, the Transmitter, the Remote Display, and the Battery Charger, which are described below. The optional DataLog® System can be used with the DigiTrak equipment to record and map your drilling data. These systems can be upgraded for use with the Cable Transmitter System, providing locating capability up to 140 ft (42.7 m) from the transmitter. Basic DigiTrak Equipment Receiver – The DigiTrak Receiver receives signals from the transmitter, processes the signal information, and displays the transmitter’s status (roll, pitch, depth/distance, predicted depth, battery, and temperature). It may also be equipped to send this information to the remote display at the drill. The most current model of DigiTrak Receivers is the Mark III. Older versions are the Mark II or Mark I. Only on the Mark III Receiver is the version identified; older versions are not specified on the receiver. If you need to know what version you have, you can contact DCI. Transmitter – Also referred to as a sonde, beacon, or probe, the DigiTrak Transmitter is placed in the drill tool/housing to send information to the receiver. The receiver displays depth/distance, signal strength, pitch, roll, battery, and temperature status. Power is supplied using C-cell alkaline batteries, except for the optional cable transmitter, which requires a 12V to 28V DC system. For gravity sewer installations, DCI manufactures a sensitive-pitch transmitter that measures pitch in 0.1% increments. Remote Display – The DigiTrak Remote Display unit enables the drill operator to view the transmitter’s pitch, roll, depth, predicted depth, and temperature, and can also be used for remote steering when walkover tracking is not possible. Battery Charger – The DigiTrak Battery Charger is used to charge and condition the DigiTrak NiCad battery packs. May be used with AC or DC sources and is easily adapted for worldwide usage. DataLog System – The DigiTrak DataLog System is an optional “as-built” mapping system used for recording and plotting the borepath location. Cable Transmitter System – The DigiTrak Cable Transmitter System is an optional add-on deep locating system used for borepaths that are deeper than 50 ft (15 m), have lengths that require several days to drill, do not allow walkover locating, and/or are in high-interference areas. Manual http://www.digitrak.com/support/Manuals/MarkIII/3-3000-00-F2_all.pdf Condition Good working condition. As pictured. Comes with two yellow beacons and one red beacon, four batteries, and everything you see in the picture. Free Shipping Free shipping to the lower 48 United States. Seller reserves the right to end the listing early if item sells locally. Buyers in California will be charged 8% sales tax due to state requirements. TERMS & CONDITIONS By placing a bid on this item, you are agreeing to all of the following Terms & Conditions, and agree to the shipping charges stated for this auction. If you win this auction, payment must be received within 7 days from the end of the auction or we reserve the right to resell the item. Item stock number: 412005 inkfrog terapeak i000000 inkFrog Analytics

Condition:	Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...	Brand	Digital Control
Model	Mark III