Dispensing Valve Loctite Nordson Efd Ne1

US $810

Hong Kong, China
Oct 29th

Open on mobile:
QR code

Teli Dispensing Asia Ltd is one of the main supplier for automatic liquid dispenser, dispensing valve, peristaltic pumps, rotary tables, industrial robots, syringes & consumables including needles, barrel and tips. Our precision dispensing system that apply accurate, consistent amount of the adhesives, sealants, lubricants and other assembly fluids used in virtually every manufacturing process. For the details, please visit our website. This needle valve Model : NE-VA1 is a multipurpose dispensing valve designed for dispensing low viscosity fluids such as adhesives, solvents, alcohols, UV cure resins. Brand : Teliasia (Made in Hong Kong / Quality control at Hong Kong / Ship from Hong Kong / Office at Hong Kong) Specification : Size : 21 X 21 X 135mm Weight : 210g Operating pressure : 70psi Air inlet : 6mm O.D. air hose Material inlet : 6mm O.D. fluid hose Fine tuned adjuster : Included 4-way operation : Quick shut off Accessory : Air Hose 2pcs Fluid Hose 1pc 15GA Blunt End Tip 5pcs 20GA Blunt End Tip 5pcs 22GA Blunt End Tip 5pcs 25GA Blunt End Tip 5pcs 16GA Tapered Tip 5pcs 20GA Tapered Tip 5pcs This valve is opened and closed by applying compressed air to the air inlet of the valve. The air inlet which is used to close the valve is at the top of the valve. The air inlet which is used to open the valve is at the center of the valve. Once the valve is connected to the fluid and air supply, it is ready to operate. When the piston is cycling properly, applying fluid pressure and shift the valve open. Keep the valve open until all the air has been purged out of the system and the flow of material is consistent. Cycle the valve several times to make sure it closes and stops the flow of material without dripping. The dispensing amount is mainly affected by the size of the selected needle and the setting of the fluid pressure. Fine adjustment : This valve has a stroke adjuster and a locking nut at the top of the valve. This allows the user to adjust the flow of material through the valve by limiting the travel of the piston. Turning the adjuster clockwise will decrease the flow and counter-clockwise will increase the flow. If the stoke adjuster is turned all the way down, it will stop the flow of material entirely. Once the desired flow has been achieved, tighten the lock nut. Please use 4-way valve controller to operate this valve. 1. The 4-way valve controller could provide a continuous "valve-off" state and remains in this mode until a signal is received to switch to "valve-on" mode. The signal is activated by the foot pedal of the valve controller. 2. The liquid which will be cured at room temperature is not suitable using at this valve. 3. The 4-way valve controller and reservoir is not included. Shipping term : We only ship to the confirmed address provided by Paypal. Before you pay, please make sure your address in Paypal matched the address you would like us to ship to. Import duties : Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. Please check with your country’s custom office to determine what additional costs will be prior to bidding/buying.